Metrohm 855 Robotic Titrosampler User Manual download pdf (Page 24)

3.5 Configuring the robotic arm

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

855 Robotic Titrosampler

If the Swing Head is not connected, connect it as follows:

Plug in the cable

￭ Guide the connection cable of the Swing Head through the guide

chain of the tower (see Chapter 3.9, page 24).

￭ Plug the Mini DIN plug into the socket 'Swing Head'.

3.5 Configuring the robotic arm

A variety of differently constructed robotic arms is available for enabling a

wide range of applications. They differ from one another in their geometric

sizes, e.g. swing radius or maximum permissible swing angle. The configu-

ration data must be entered in the Sample Processor or in the control

software prior to the assembly of the robotic arm. The data required

is engraved on the underside of the robotic arm. Examples of the most

common robotic arms are shown in the illustration below.

321

4 5

Figure 10 Robotic arms - standard model versions:

Transfer robotic arm (6.1462.030)

For sample transfer, left-swinging.

Transfer robotic arm (6.1462.040)

For sample transfer, right-swinging.

Titration robotic arm (6.1462.050)

With titration head, left-/right-swinging *).

Macro robotic arm (6.1462.060)

With holder for a 6.1458.XXX titration head

insert, left-swinging.

Macro robotic arm (6.1462.070)

With holder for a 6.1458.XXX titration head

insert, right-swinging.

*) can be mounted in two ways

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 84 85

No comments

Metrohm 855 Robotic Titrosampler User Manual Page 24