Metrohm 855 Robotic Titrosampler User Manual download pdf (Page 22)

3.3 Connecting a computer

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

855 Robotic Titrosampler

3.3 Connecting a computer

The 855 Robotic Titrosampler requires a USB connection to a computer in

order to be able to be controlled by a PC software. When a 6.2151.000

controller cable is used, the instrument can be connected directly, either to

a USB socket on a computer, to a connected USB hub or to a different

Metrohm control instrument.

Cable connection and driver installation

A driver installation is required in order to ensure that the 855 Robotic Titro-

sampler is recognized by the PC software. To accomplish this, you must

comply with the procedures specified. The following steps are necessary:

Installing the software

￭ Insert the PC software installation CD and carry out the installation

program directions.

￭ Exit the program if you have started it after the installation.

Establishing cable connections

￭ Connect all peripheral devices to the instrument (see Chapter

3.13, page 29).

￭ Connect the 855 Robotic Titrosampler to the mains supply if you

have not already done this.

￭ Connect the instrument to your computer through a USB connector

(Type A) (see Instructions for Use for your computer). The

6.2151.000 cable is used for this purpose.

6.2151.000

USB 2

USB 1

Contr.

MSB 2

Figure 8 Connecting the computer

For Windows 2000: The instrument is recognized and the driver is

installed automatically.

For Windows XP: The instrument is recognized and the installation

assistant for the driver is started automatically. Select the option "Install

software automatically" and click on [Continue]. Exit the assistant with

[Finish].

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 84 85

No comments

Metrohm 855 Robotic Titrosampler User Manual Page 22