Metrohm 765 Dosimat User Manual download pdf (Page 57)

5.2 Warranty and certificates

765 Dosimat

5.2 Warranty and certificates

5.2.1 Warranty

The warranty regarding our products is limited to rectification free of

charge in our workshops of defects that can be proved to be due to

material, design or manufacturing faults which appear within 12

months from the day of delivery. Transport costs are chargeable to

the purchaser.

For day and night operation, the warranty is valid for 6 months.

Glass breakage in the case of electrodes or other glass parts is not

covered by the warranty. Checks which are not a result of material or

manufacturing faults are also charged during the warranty period.

For parts of outside manufacture insofar as these constitute an ap-

preciable part of our instrument, the warranty stipulations of the

manufacturer in question apply.

With regard to the guarantee of accuracy, the technical specifica-

tions in the Instructions for Use are authoritative.

Concerning defects in material, construction or design as well as the

absence of guaranteed features, the purchaser has no rights or

claims except those mentioned above.

If damage of the packaging is evident on receipt of a consignment

or if the goods show signs of transport damage after unpacking, the

carrier must be informed immediately and a written damage report

demanded. Lack of an official damage report releases METROHM

from any liability to pay compensation.

If any instruments and parts have to be returned, the original pack-

aging should be used if at all possible. This applies above all to in-

struments, electrodes, burette cylinders and PTFE pistons. Before

embedding in wood shavings or similar material, the parts must be

packed in a dustproof package (for instruments, use of a plastic bag

is imperative). If open assemblies are enclosed in the scope of de-

livery that are sensitive to electromagnetic voltages (e.g. data inter-

faces etc.) these must be returned in the associated original protec-

tive packaging (e.g. conductive protective bag). (Exception: assem-

blies with built-in voltage source belong in a non-conductive protec-

tive packaging). For damage which arises as a result of non-

compliance with these instructions, no warranty responsibility what-

soever will be accepted by METROHM.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 65 66

No comments

Metrohm 765 Dosimat User Manual Page 57