Metrohm 856 Conductivity Module User Manual download pdf (Page 20)

3.3 Connecting MSB devices

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

856 Conductivity Module

Setting up the instrument

￭ Start the PC software.

The instrument is automatically recognized. The configuration dia-

log for the instrument is displayed.

￭ Make configuration settings for the instrument and its connec-

tors.

More detailed information concerning the configuration of the

instrument can be found in the documentation for the respective PC

software.

3.3 Connecting MSB devices

In order to connect MSB devices, e.g. stirrers or dosing devices, Metrohm

instruments are equipped with up to a maximum of four connectors on

what is referred to as the Metrohm Serial Bus (MSB). Various kinds of

peripheral devices can be connected in sequence (in series, as a

"daisy chain") at a single MSB connector (8-pin Mini DIN socket) and con-

trolled simultaneously by the respective control instrument. In addition to

the connection cable, stirrers and the Remote Box are each equipped with

their own MSB socket for this purpose.

The following figure provides an overview of the instruments that can be

connected to an MSB socket, along with a number of different cabling

variations.

MSB

Stirrer / Ti Stand

Dosimat / Dosino

Dosimat

Remote Box

Dosino / Dosimat

Dosino

Relay Box

Ti Stand / Stirrer

Figure 6

MSB connections

The control instrument determines which peripheral devices are suppor-

ted.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

No comments

Metrohm 856 Conductivity Module User Manual Page 20