tiamo 2.4Manual8.101.8061EN
Table of contents■■■■■■■■■■■■■■■■■■■■■■VIII■■■■■■■■tiamo 2.46.7 Sensors subwindow ... 13976.7.1 Se
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■84■■■■■■■■tiamo 2.4Characters Significance Example' Inverted commas used for enteringany text '&apos
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■984■■■■■■■■tiamo 2.4Measurement with drift controlThe measurement is carried out drift-controlled if this option ise
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■985Max. waiting timeIf the signal drift has not yet been reached, then the measured value willbe accept
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■986■■■■■■■■tiamo 2.4Titrando, 855, 867Input range 0 - 999999 sDefault value 120 sTitrinoInput range 0 - 9999 sDefaul
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9875.6.4.6.4 MEAS Upol - EvaluationsTab: Method ▶ MEAS Upol ▶ Properties... ▶ EvaluationsCommand nameN
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■988■■■■■■■■tiamo 2.4Threshold valueThe evaluation of the minimum begins as soon as the slope of the curveexceeds the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■989SlopeMinimum difference between the slope before and after the break point.The smaller the differenc
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■990■■■■■■■■tiamo 2.45.6.4.6.5 MEAS Upol - Additional measured valuesTab: Method ▶ MEAS Upol ▶ Properties... ▶ Addit
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■991[New]Open the dialog window External measured value # in which theparameters for the external measur
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■992■■■■■■■■tiamo 2.4Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,799pH/Ion - Meter: 867Roboti
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■993Designation Description.EME End measured value (measured value after processingof the command) in th
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■85NOTEEntries of the type Number are always provided with a decimal place.Example: T
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■994■■■■■■■■tiamo 2.4Designation Description.MI.TEM Temperature with minimum measured value in °C.MI.TIM Time for the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■995SensorMeasuring inputSelection of the measuring input the sensor is connected to.Titrando, 867Select
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■996■■■■■■■■tiamo 2.4Switch off automaticallyon | off (Default value: on)If this option is activated, the stirrer wil
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■997Measurement with drift controlIf the option Measurement with drift control has been selected, thenth
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■998■■■■■■■■tiamo 2.4Titrando, 855, 867Input range 0.1 - 999999.0 s (Increment: 0.1)Default value 2.0 sTitrinoInput r
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■999Stop measured valueStop when the entered measured value has been reached since the startof the measu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1000■■■■■■■■tiamo 2.4Moves the selected line up (changes the sequence).Moves the selected line down (changes the seq
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1001Break point evaluationNOTEThis evaluation method is possible only with Titrando, 855, 856 and867.Br
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1002■■■■■■■■tiamo 2.4Lower limitValue for the lower limit of the window.Time for the lower limit of the window.Windo
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1003[New]Open the dialog window Calc. measured value # in which the parame-ters for the additional meas
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■86■■■■■■■■tiamo 2.4The parameter can be indicated either directly as a number or as a variableof the type Numb
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1004■■■■■■■■tiamo 2.4Fixed valueValue of the fixed endpoint.Measured valueInput range -20.0 - 150.0 °CTimeInput rang
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1005Identifica-tionDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variable
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1006■■■■■■■■tiamo 2.4Identifica-tionDescription.MA.TEM Temperature for the maximum measured value in °C.MA.TIM Time
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1007If the option not defined is selected as Device name, any device typesor device groups which are ab
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1008■■■■■■■■tiamo 2.4Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1009presented as curves under the designation Calculated 1…3 and used informulas as variables 'Com
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1010■■■■■■■■tiamo 2.4Titrando: 808, 809, 835, 836, 857, 904, 905, 906, 907pH/Ion - Meter: 867Robotic Titrosampler: 8
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1011Designa-tionDescription.FIN Command status; 1 = Command has ended at leastonce, 0, invalid (variabl
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1012■■■■■■■■tiamo 2.4DeviceDevice nameSelection of a device from those available in the device table. The onlydevice
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1013Titrando, 855Selection continuous | automatic | offDefault value automaticcontinuousA temperature s
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■872.4.4.9 Miscellaneous functions2.4.4.9.1 CaseDialog window: Formula editor ▶ Ope
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1014■■■■■■■■tiamo 2.4MeasurementThe two measuring modes Measurement with drift control or Mea-surement without drift
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1015Input range 0 - 999999 sDefault value 0 sMax. waiting timeIf the signal drift has not yet been reac
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1016■■■■■■■■tiamo 2.4Stop measured valueStop when the entered measured value has been reached since the startof the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1017[Properties]Open the dialog window Calc. measured value # in which the parame-ters for the addition
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1018■■■■■■■■tiamo 2.4ParametersThe parameters for the command MEAS Cond are configured on the fol-lowing 4 tabs:■ Ge
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1019Designation Description.FP{x}.MEA Measured value for the fixed endpoint × (1…9) in theunit of the m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1020■■■■■■■■tiamo 2.4Designation Description.TC.CO Coefficient c0 of the Chebyshev polynomial of the solu-tion used.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1021Selection 712 Conductometer | 856 Conductivity Mod-uleDefault value 856 Conductivity ModuleSensorSe
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1022■■■■■■■■tiamo 2.4offMeans that no stirrer will be used.Stirring rateSetting the stirring rate. The algebraic sig
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1023Measurement without drift controlThe measurement is carried out without drift control if this optio
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■88■■■■■■■■tiamo 2.4Case('RS.IntermediateRes' > 5.5;"Intermediate result toohigh";'
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1024■■■■■■■■tiamo 2.4Measuring intervalTime interval for entering a measuring point in the measuring point list.856I
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1025Selection offDefault value offoffNo stop.TemperatureMeasuring temperatureTemperature of the solutio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1026■■■■■■■■tiamo 2.4Sample solutionSelection of a function for the temperature coefficient from the tableSample sol
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1027Moves the selected line down (changes the sequence).[New]Open the dialog window Fixed endpoint eval
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1028■■■■■■■■tiamo 2.4Break point evaluationBreak point evaluationon | off (Default value: off)If this option is acti
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1029Window = TimeInput range 0 - 999999 sDefault value 0 sUpper limitValue for the upper limit of the w
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1030■■■■■■■■tiamo 2.4[Properties]Open the dialog window Calc. measured value # in which the parame-ters for the addi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1031Measured valueInput range 0.0000 - 2000.00 mS/cmTimeInput range 0.0 - 999999.9 s5.6.4.11 MEAS TC C
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1032■■■■■■■■tiamo 2.4Designation Description.BP{x}.TEM Temperature for the break point × (1…9) in °C.BP{x}.TIM Time
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1033Designation Description.MA.TEM Temperature for the maximum measured value in °C.MA.TIM Time in s un
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■89ASCII value(dec)Character ASCII value(dec)Character ASCII value(dec)Character35 Ha
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1034■■■■■■■■tiamo 2.4DeviceDevice nameSelection of a device from those available in the device table. The onlydevice
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1035Switch off automaticallyon | off (Default value: on)If this option is activated, the stirrer will b
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1036■■■■■■■■tiamo 2.4Start temperatureTemperature at the start of the measurement.Input range -20.0 - 150.0 °CDefaul
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1037Additional external measured valuesAdditional external measured valueson | off (Default value: off)
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1038■■■■■■■■tiamo 2.4AppearanceThe command has the following appearance:ParametersThe parameters for the MEAS Ref co
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1039DeviceDevice nameSelection of a device from those available in the device table. Only deviceswith w
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1040■■■■■■■■tiamo 2.4Integration timeIntegration time for spectrum recording.Input range 0.01 - 600000 msDefault val
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1041NOTEIn a one-channel instrument setup, only instruments for which the entrynot defined is selected
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1042■■■■■■■■tiamo 2.4Identification Description.STY Type of stop with which the command was stopped:1 = normal; 0 =
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1043Device typeDisplay or selection of the instrument type. If an instrument is selected inthe Device n
2.5 Editing■■■■■■■■■■■■■■■■■■■■■■90■■■■■■■■tiamo 2.4ASCII value(dec)Character ASCII value(dec)Character ASCII value(dec)Character63 Question mark(?)95
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1044■■■■■■■■tiamo 2.4SmoothingNumber of neighboring pixels with which the value for each measurementpixel is determi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1045End wavelengthUpper limit of the evaluation range.Input range 100.0 - 2,000.0 nmDefault value 1,000
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1046■■■■■■■■tiamo 2.4■ EvaluationsDefinition of evaluation results for absorbance measurements.Command variablesThe
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1047Identification Description.ITE1)Initial temperature (temperature before start condi-tions are proce
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1048■■■■■■■■tiamo 2.42) For the Avantes spectrometer, MTE always equals 05.6.4.14.2 MEAS Opt - General/HardwareTab:
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1049continuousA temperature sensor must be connected. The temperature will thenbe measured continuously
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1050■■■■■■■■tiamo 2.4Blank valueValue by which the measured quantity (absorbance) is corrected. Here anexpression ca
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1051MeasurementTwo types of measurement can be selected, Measurement with driftcontrol or Measurement w
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1052■■■■■■■■tiamo 2.4Max. waiting timeIf the signal drift has not yet been reached, then the measured value willbe a
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1053089 PhotometerInput range 0.25 - 999,999.00 s (Increment: 0.25)Default value 2.0 sStop measured val
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■91Selects the monthSelects the yearSelects the daySelected date2.5.2 Text editorDia
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1054■■■■■■■■tiamo 2.4Moves the selected line up (changes the sequence).Moves the selected line down (changes the seq
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1055Break point evaluationBreak point evaluationon | off (Default value: off)If this option is activate
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1056■■■■■■■■tiamo 2.4Window = TimeInput range 0 - 999,999 sDefault value 0 sUpper limitMeasured value for the upper
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1057[Delete]Deletes the calculated measured value selected in the table.Additional external measured va
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1058■■■■■■■■tiamo 2.45.6.4.15 MEAS Opt Conc5.6.4.15.1 MEAS Opt Conc - OverviewDialog window: Method ▶ MEAS Opt Con
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1059Command variablesThe following command variables are generated by the MEAS Opt Conccommand in the m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1060■■■■■■■■tiamo 2.4Identifica-tionDescription.STY Type of stop with which the command was stopped: 1= normal; 0 =
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1061SensorColorimetric sensorSelection of a colorimetric sensor from the table of colorimetric sensors.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1062■■■■■■■■tiamo 2.45.6.4.15.3 MEAS Opt Conc - Measuring parametersTab: Method ▶ MEAS Opt Conc ▶ Properties... ▶ M
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1063SmoothingNumber of neighboring pixels with which the light intensity of each mea-surement pixel is
2.5 Editing■■■■■■■■■■■■■■■■■■■■■■92■■■■■■■■tiamo 2.4NOTEIn order for results of formulas of the type Date to be output correctly,for text windows they
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1064■■■■■■■■tiamo 2.4Measurement with drift controlSignal driftThe measured value is only accepted if the signal dri
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1065Input range 0 - 999,999 sDefault value 600 sMeasuring intervalTime interval for entering a measurin
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1066■■■■■■■■tiamo 2.4[New]Opens the Calc. measured value # dialog window, in which the param-eters for the additiona
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1067AppearanceThe command has the following appearance:ParametersThe parameters for the MEAS TMF comman
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1068■■■■■■■■tiamo 2.4Identifica-tionDescription.LP.TEM Temperature for the last measuring point in the measur-ing po
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1069Selection 089 PhotometerDefault value 089 PhotometerSensorTemperature measurementType of temperatur
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1070■■■■■■■■tiamo 2.4MeasurementTwo types of measurement can be selected, Measurement with driftcontrol or Measureme
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1071Input range 0 - 999,999 sDefault value 154 sMeasuring intervalTime interval for entering a measured
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1072■■■■■■■■tiamo 2.45.6.4.17 STDADD man5.6.4.17.1 STDADD man - OverviewDialog window: Method ▶ STDADD man ▶ Prope
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1073Identifi-cationDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variable
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■93The button opens a selection dialog for linking a file as a link target.2.6 E-mai
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1074■■■■■■■■tiamo 2.4DeviceDevice nameSelection of a device from those available in the device table. The onlydevice
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1075Selection continuous | automatic | offDefault value automaticcontinuousA temperature sensor must be
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1076■■■■■■■■tiamo 2.4Number of additionsNumber of times the standard solution is to be added.Input range 1 - 19 Defa
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1077DeviceConcentration unit of addition solution.Selection mol/L | mmol/L | µmol/L | ppm | g/L | mg/L
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1078■■■■■■■■tiamo 2.4Measuring intervalTime interval for entering a measuring point in the measuring point list.Inpu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1079Titrando: 808, 809, 835, 836, 857, 904, 905, 906, 907pH/Ion - Meter: 867Robotic Titrosampler: 855Ap
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1080■■■■■■■■tiamo 2.4Identifi-cationDescription.EME Final measured value (measured value after processing ofthe comm
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1081DeviceDevice nameSelection of a device from those available in the device table. The onlydevices wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1082■■■■■■■■tiamo 2.4command, a check is made of the working life, the validity of the titer andthe GLP test interva
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1083automaticIf a temperature sensor is connected then the temperature will bemeasured continuously. Ot
■■■■■■■■■■■■■■■■■■■■■■Table of contentstiamo 2.4■■■■■■■■IX7.3.6 Properties - MSB # ... 14887
3.1 Workplace - General■■■■■■■■■■■■■■■■■■■■■■94■■■■■■■■tiamo 2.43 Workplace3.1 Workplace - General3.1.1 Workplace - DefinitionProgram part: Workpla
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1084■■■■■■■■tiamo 2.4Volume auxiliary solutionVolume of the auxiliary solution (e.g. buffer) to be added to the samp
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1085DeviceConcentration unit of addition solution.Selection mol/L | mmol/L | µmol/L | ppm | g/L | mg/L
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1086■■■■■■■■tiamo 2.4the drift will be calculated automatically according to the following equa-tion:Input range 0 -
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■10875.6.4.19 STDADD auto5.6.4.19.1 STDADD auto - OverviewDialog window: Method ▶ STDADD auto ▶ Proper
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1088■■■■■■■■tiamo 2.4Identifi-cationDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (vari
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■10895.6.4.19.2 STDADD auto - General/HardwareTab: Method ▶ STDADD auto ▶ Properties... ▶ General/Hardw
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1090■■■■■■■■tiamo 2.4855Selection 1 | 2 | 3Default value 1SolutionInput of a solution name or selection of a solutio
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1091Selection 'Sensor name' | ISE electrodeDefault value ISE electrodeTemperature measurement
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1092■■■■■■■■tiamo 2.45.6.4.19.3 STDADD auto - Standard additionTab: Method ▶ STDADD ▶ Properties... ▶ Standard addi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1093Selection mol/L | mmol/L | µmol/L | ppm | g/L | mg/L | µg/L | mg/mL | µg/mL | % | mEq/LDefault valu
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■95■ ToolsManual control, run test, sample tables, sample assignment tables, texttemplates.■ HelpOpen
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1094■■■■■■■■tiamo 2.4Max. waiting timeIf the signal drift has not yet been reached, then the measured value willbe a
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■10955.6.5 Calibration commands5.6.5.1 Calibration commands - OverviewMenu item: Method ▶ Insert ▶ New
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1096■■■■■■■■tiamo 2.4The calibration can be carried out with either manual solution changes orautomatic solution cha
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1097■ CAL MEAS ConcMeasurement of standards for the calibration of ion-selective elec-trodes (ISE elect
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1098■■■■■■■■tiamo 2.4* Definition of the number of calibration solutions and the type of solutionexchange. The reque
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1099* Definition of the number of calibration solutions and the type of solutionexchange.** Move to the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1100■■■■■■■■tiamo 2.4■ Defining rack positions for calibration solutions in the methodStarting from an initial rack
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■11015.6.5.4 CAL Cond5.6.5.4.1 CAL Cond - OverviewDialog window: Method ▶ CAL Cond ▶ Properties... ▶ C
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1102■■■■■■■■tiamo 2.4Identifica-tionDescription.DBL Total duration for the processing of the command in s.EME Final
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1103The general parameters for the device, the sensor and the stirrer aredefined on this tab.DeviceDevi
3.1 Workplace - General■■■■■■■■■■■■■■■■■■■■■■96■■■■■■■■tiamo 2.4Split horizontally Split the workplace window horizontally and display two workplaces
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1104■■■■■■■■tiamo 2.4offThe temperature will not be measured. The temperature manuallyentered under Temperature on t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1105autoThe more suitable of the two frequencies is selected.Type of measurementType of measurement sel
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1106■■■■■■■■tiamo 2.4856Input range 0.001 - 999.0 (mS/cm)/minDefault value 10.0 (mS/cm)/minMin. waiting timeThe meas
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1107Measuring intervalTime interval for entering a measuring point in the measuring point list.Max. num
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1108■■■■■■■■tiamo 2.4TemplateIf this option is selected, then a conductivity standard can be selected,and its data w
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1109Data transmission from standardInput of the data of the conductivity standard, which should be as c
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1110■■■■■■■■tiamo 2.4NOTEOnly instruments for a one-channel instrument setup can be selected.For a wavelength calibr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1111Identification Description.C3 Coefficient c3 of the calibration curve.CAL Status of the calibration
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1112■■■■■■■■tiamo 2.4Selection 'Device name' | not definedDefault value not definednot definedIn this case
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1113The reference wavelengths with which the spectrometer is calibrated canbe entered on this tab.Toler
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■973.1.4 Workplace - ToolbarProgram part: WorkplaceSample table/New…Open a new and empty sample tabl
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1114■■■■■■■■tiamo 2.4ParametersThe parameters for the CAL LOOP Conc command are configured in thefollowing dialog wi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1115tiamo determines the calibration data for the concentration measurementas for the pH calibration in
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1116■■■■■■■■tiamo 2.4Identifi-cationDescription.ENP Electrode zero point calculated from the calibration.FIN Command
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1117Request for standard exchangeon | off (Default value: on)If this option is enabled, a request for m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1118■■■■■■■■tiamo 2.4Identifica-tionDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (vari
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1119DeviceDevice nameSelection of a device from those available in the device table. The onlydevices wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1120■■■■■■■■tiamo 2.4Selection continuous | automatic | offDefault value automaticcontinuousA temperature sensor mus
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1121Measurement with drift controlThe ISE calibration is carried out drift-controlled. The measurement
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1122■■■■■■■■tiamo 2.4Input range -20.0 - 150.0 °CDefault value 25.0 °C5.6.5.8 ELT LOOP5.6.5.8.1 ELT LOOP - Overvie
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1123Identi-fica-tionDescription.ETR Result of the electrode test:0 = No data available1 = Short circuit
3.1 Workplace - General■■■■■■■■■■■■■■■■■■■■■■98■■■■■■■■tiamo 2.4■ Live display 2Display of live curves, measured values and messages for the runningde
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1124■■■■■■■■tiamo 2.4The general parameters for the buffer used and for the electrode test areset in this dialog win
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■11255.6.5.9 ELT MEAS5.6.5.9.1 ELT MEAS - OverviewDialog window: Method ▶ ELT MEAS ▶ Properties... ▶ E
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1126■■■■■■■■tiamo 2.4Designa-tionDescription.EME End measured value (measured value after processing ofthe command)
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1127Selection 'Device name' | not definedDefault value not definednot definedIn this case, th
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1128■■■■■■■■tiamo 2.4automaticIf a temperature sensor is connected then the temperature will bemeasured continuously
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■11295.6.5.10 CAL LOOP Opt5.6.5.10.1 CAL LOOP Opt - OverviewDialog window: Method ▶ CAL LOOP Opt ▶ Pro
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1130■■■■■■■■tiamo 2.4Identifica-tionDescription.FIN Command status; 1 = Command has ended at leastonce, 0, invalid (
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1131Moves the concentration downward (modifies sequence).[New]Add the concentration for the next standa
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1132■■■■■■■■tiamo 2.4DevicesThis command can be executed with the following instruments:Spectrometer: AvantesNOTEIn
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1133Identifica-tionDescription.EME End measured value (measured value after processing ofthe command) i
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■99■ Modify sample data live■ Define propertiesDetermination series■ Start/stop series■ Interrupt/res
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1134■■■■■■■■tiamo 2.4DeviceDevice nameSelection of a device from those available in the device table. Only deviceswi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1135offThe temperature will not be measured. The temperature entered man-ually under Temperature on the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1136■■■■■■■■tiamo 2.4from other measuring command) by which every measured absorbancevalue can then be corrected.Inp
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1137Selection Measurement with drift control | Measure-ment without drift controlMeasurement with drift
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1138■■■■■■■■tiamo 2.4time has not been newly entered, then a waiting time that is suitable forthe drift will be calc
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1139089 PhotometerInput range 0.25 - 999,999.00 s (Increment: 0.25)Default value 2.0 sStop measured val
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1140■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated by the CAL LOOP pHcommand in the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1141If these buffers are used, tiamo will recognize the specific buffer automati-cally.Selection Metroh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1142■■■■■■■■tiamo 2.45.6.5.12.3 Buffer dataDialog window: Method ▶ CAL LOOP pH ▶ Properties... ▶ CAL LOOP pH - &apo
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1143NISTTemp. (°C) NIST1 NIST4 NIST7 NIST9 NIST13 pH 1 pH 4 pH 7 pH 9 pH 130 - 4.010 6.984 9.464 13.42
3.1 Workplace - General■■■■■■■■■■■■■■■■■■■■■■100■■■■■■■■tiamo 2.4■ Load viewLoad a saved view.■ Rename viewRename a saved view.■ Delete viewDelete a s
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1144■■■■■■■■tiamo 2.4Temp. (°C) DIN1 DIN3 DIN4 DIN7 DIN9 DIN12 pH 1 pH 3 pH 4 pH 7 pH 9 pH 1220 1.09 3.07 4.65 6.80
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1145Temp. (°C) Fis2 Fis4 Fis7 Fis10 pH 2 pH 4 pH 7 pH 1045 2.01 4.04 6.97 9.8150 2.01 4.06 6.97 9.7855
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1146■■■■■■■■tiamo 2.4Temp. (°C) FBS4 FBS7 FBS9 pH 4 pH 7 pH 970 4.13 6.94 8.6775 4.14 6.94 8.6580 4.16 6.95 8.6385
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1147Temp. (°C) MT2 MT4 MT7 MT9 MT11 pH 2 pH 4 pH 7 pH 9 pH 1195 - 4.35 7.12 8.77 -Merck CertiPUR 20°C/
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1148■■■■■■■■tiamo 2.4Temp. (°C) MerC4.01 MerC7.00 MerC9.00 MerC10.00 pH 4.01 pH 7.00 pH 9.00 pH 10.005 4.00 7.09 9.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1149Temp. (°C) Bec4 Bec7 Bec10 pH 4 pH 7 pH 1030 4.01 6.99 9.9735 4.02 6.99 9.9340 4.03 6.98 9.8945 4.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1150■■■■■■■■tiamo 2.4Temp. (°C) Rad4.01 Rad7.00 Rad9.18 pH 4.01 pH 7 pH 9.1855 4.064 6.965 8.98560 4.080 6.968 8.96
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1151Temp. (°C) Bak4 Bak7 Bak9 Bak10 pH 4.00 pH 7.00 pH 9.00 pH 10.0080 4.16 6.98 8.66 9.6885 4.19 6.99
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1152■■■■■■■■tiamo 2.4PrecisaTemp. (°C) Pre4 Pre7 Pre9 pH 4.00 pH 7.00 pH 9.000 3.99 7.11 9.275 3.99 7.08 9.1810 3.9
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1153Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,906, 907Titrino: 702, 716, 718
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■101Selection 'Selection of the subwindows'Displayed subwindowsDisplaying the subwindows th
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1154■■■■■■■■tiamo 2.4Designa-tionDescription.IME Initial measured value (measured value before start con-ditions are
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1155Device typeDisplay or selection of the device type. If a device is selected under Devicename, then
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1156■■■■■■■■tiamo 2.4automaticIf a temperature sensor is connected then the temperature will bemeasured continuously
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1157Measurement with drift controlThe pH calibration is carried out drift-controlled. The measurement i
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1158■■■■■■■■tiamo 2.4Titrando, 855, 867Input range 0.1 - 999999.0 s (Increment: 0.1)Default value 2.0 sTitrinoInput
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■11595.6.6.2 ADD5.6.6.2.1 ADD - OverviewDialog window: Method ▶ ADD ▶ Properties... ▶ ADD - 'Comm
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1160■■■■■■■■tiamo 2.4Identifica-tionDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (vari
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1161If the option not defined is selected as Device name, any device typesor device groups which are ab
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1162■■■■■■■■tiamo 2.4not definedNo tests will be carried out.Tandem dosingon | off (Default value: off)If this optio
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1163Titrando, 846, 856, 867, 814, 815, 855, 864, 874Input range 0.01 - 166.00 mL/minDefault value maxim
3.2 Workplaces■■■■■■■■■■■■■■■■■■■■■■102■■■■■■■■tiamo 2.4[Rename]Rename the selected view.[Delete]Delete the selected view.[Save]Save the view under th
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1164■■■■■■■■tiamo 2.4Titrando, 846, 814, 815, 855, 864, 874Input range 0.00000 - 99,999.9 mLDefault value 10.0000 mL
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1165Titrando, 814, 815, 855, 864, 874Input range 0.01 - 166.00 mL/minDefault value maximum mL/min730, 7
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1166■■■■■■■■tiamo 2.45.6.6.3 DOS5.6.6.3.1 DOS - OverviewMenu item: Method ▶ Paste ▶ New command...Command for cont
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1167Specification of volume and dosing timeYou define the volume and the time in which this volume is t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1168■■■■■■■■tiamo 2.4NOTEThis formula applies only for using a single dosing device. The dosingrate is equal to the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1169Filling timesFilling times are not included in the calculation of the dosing rate. The fill-ing tim
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1170■■■■■■■■tiamo 2.4Dosing rate in mL/min = dosing volume/(total duration - number of refill-ings • filling time •
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1171Titrando: 835, 836, 842, 857, 902, 906, 907Titrino: 718, 736, 751, 799pH/Ion Meter: 867Robotic Titr
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1172■■■■■■■■tiamo 2.4Identifica-tionDescription.EME Final measured value (measured value after processingof the comm
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1173Identifica-tionDescription.MR.MRS Standard deviation for mean dosing rate for the wholerange in mL/
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■103Selection green | blue | ochre | brownDefault value green3.2.2 Edit workplaceDialog window: Work
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1174■■■■■■■■tiamo 2.4If the option not defined is selected as Device name, any device typesor device groups which ar
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1175Tandem dosingon | off (Default value: off)If this option is enabled, then dosing will proceed conti
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1176■■■■■■■■tiamo 2.4SensorMeasuring inputSelection of the measuring input to which the sensor is connected.Titrando
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1177StirrerStirrerSelection of the stirrer.Titrando, 855Selection 1 | 2 | 3 | 4 | offoffNo stirrer will
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1178■■■■■■■■tiamo 2.4time * dosing rate and is not shown (see Chapter 5.6.6.3.2, page1166).Selection Volume/dosing r
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1179Input range 0 - 999999 sDefault value 0 sTemperatureMeasuring temperature which can be entered manu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1180■■■■■■■■tiamo 2.4Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 100.000 mLSelection offoffMeans that
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■11815.6.6.3.4.5 DOS pH - MonitoringTab: Method ▶ DOS pH ▶ Properties... ▶ MonitoringCommand nameName o
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1182■■■■■■■■tiamo 2.4Titrando, 855Input range -20.000 - 20.000 Default value 20.000 TitrinoInput range -20.00 - 20.0
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1183Monitoring TemperatureMonitoring Temperatureon | off (Default value: off)If this option is switched
Table of contents■■■■■■■■■■■■■■■■■■■■■■X■■■■■■■■tiamo 2.47.9.7 Properties - Gas ... 1534
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■104■■■■■■■■tiamo 2.4A menu with the currently opened workplacesis displayed by clicking with either the left or
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1184■■■■■■■■tiamo 2.4Titrando, 855Input range 0.0 - 150.0 °CDefault value 0.2 °CActionSelection of the event to be t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■11855.6.6.3.4.6 DOS pH - Additional measured valuesTab: Method ▶ DOS pH ▶ Properties... ▶ Additional m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1186■■■■■■■■tiamo 2.4[Properties]Opens the dialog window External measured value # in which theparameters for the ex
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1187Command variablesThe following command variables are generated in the method run by thecommand DOS
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1188■■■■■■■■tiamo 2.4Identifica-tionDescription.LP.EXx External value × (1...3) for the last measuring point ofthe m
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1189DeviceDevice nameSelection of a device from those available in the device table. The onlydevices wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1190■■■■■■■■tiamo 2.4SolutionInput of a solution name or selection of a solution from the solutionsdefined in the so
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1191Titrando, 855Selection Solution name | not definedDefault value not definednot definedNo tests will
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1192■■■■■■■■tiamo 2.4Titrando, 855Selection continuous | automatic | offDefault value automaticcontinuousA temperatu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1193Switch on/off automaticallyon | off (Default value: on)If this option is enabled, the stirrer will
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1053.3.1.2 Opening sample tablesDialog window: Workplace ▶ Tools ▶ Sample table ▶ Open… ▶ Open samp
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1194■■■■■■■■tiamo 2.4TitrinoInput range 0.01 - 150.00 mL/minDefault value maximum mL/minNOTEThe dosing rate should b
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1195TitrinoInput range 1 - 999999 sDefault value 5 s5.6.6.3.5.4 DOS U - Stop conditionsTab: Method ▶ D
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1196■■■■■■■■tiamo 2.4Titrando, 855Input range 0.01 - 166.00 mL/minDefault value maximum mL/minTitrinoInput range 0.0
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1197Lower hysteresisLower hysteresis of the measured value. If the measured value exceeds thelower limi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1198■■■■■■■■tiamo 2.4Wait for [Continue]Reagent dosing in the current DOS command is interrupted and amessage appear
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1199Titrando, 855Input range -20.0 - 150.0 °CDefault value 150.0 °CTitrinoInput range -170.0 - 500.0 °C
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1200■■■■■■■■tiamo 2.4Track call on limit exceedingIn this table, which cannot be edited directly, a maximum of 20 en
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1201[Delete]Deletes the calculated measured value selected in the table.Additional external measured va
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1202■■■■■■■■tiamo 2.4AppearanceThe command has the following appearance:ParametersThe parameters for the command LQH
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1203The general parameters for the device and for the dosing device aredefined on this tab.DeviceDevice
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■106■■■■■■■■tiamo 2.4ToolbarSave sample tableSave the sample table.Output of PDF fileOutput the sample table as
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1204■■■■■■■■tiamo 2.4the correct solution has been set on the selected dosing device andwhether the dosing device ty
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1205Eject to end volumeThe whole cylinder content is ejected via the given port. In contrast tothe func
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1206■■■■■■■■tiamo 2.4VolumeEnter the volume to be moved. This parameter is available only for theFunctions Dosing or
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12075.6.6.5 PREP5.6.6.5.1 PREP - OverviewDialog window: Method ▶ PREP ▶ Properties... ▶ PREP - '
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1208■■■■■■■■tiamo 2.4Identifi-cationDescription.CYL Cylinder volume of the exchange or dosing unit used forthe comma
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1209Titrando, 846, 856, 867Selection 1 | 2 | 3 | 4Default value 1778, 789, 814, 815, 855, 864, 874Selec
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1210■■■■■■■■tiamo 2.4Titrino: 736, 751, 758, 799Dosing Interface: 846Conductometer: 856pH/Ion - Meter: 867Sample Pro
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1211DeviceDevice nameSelection of a device from those available in the device table. The onlydevices wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1212■■■■■■■■tiamo 2.4SolutionInput of a solution name or selection of a solution from the solutionsdefined in the so
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1213Identifi-cationDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variable
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1071 in the selected cells of a column, starting from the first selected cell. Thisworks with pure n
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1214■■■■■■■■tiamo 2.4Dosing deviceDosing deviceSelection of the dosing device to be prepared. All the dosing device
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12155.6.7 Automation commands5.6.7.1 Automation commands - OverviewMenu item: Method ▶ Paste ▶ New co
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1216■■■■■■■■tiamo 2.4ParametersThe parameters for the command MOVE are configured in the followingdialog window:■ MO
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1217not definedIn this case, the device name must be assigned by the user at the startof the method.Dev
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1218■■■■■■■■tiamo 2.4NumberSpecification of the number of the rack position. This parameter is onlyvisible for Move
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1219Display messageA message is displayed and the determination is stopped.Stop determinationThe determ
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1220■■■■■■■■tiamo 2.4DevicesThis command can be executed with the following devices:Sample Processor: 778, 789, 814,
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1221DeviceDevice nameSelection of a device from those available in the device table. The onlydevices wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1222■■■■■■■■tiamo 2.4Relative angleSwinging by the specified swing angle relative to the current position.This can b
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1223ParametersThe parameters for the command LIFT are configured in the followingdialog window:■ LIFT -
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■108■■■■■■■■tiamo 2.43.3.1.4 Editing sample dataDialog window: Workplace ▶ Tools ▶ Sampletable ▶ Open… ▶ [Open]
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1224■■■■■■■■tiamo 2.4Device typeDisplay or selection of the device type. If a device is selected under Devicename, t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1225NOTEPlease make sure that none of the lift positions exceed the maximumstroke path given in the tow
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1226■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated in the method run by thecommand
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1227PumpsTowerSelection of the tower of the Sample Processor for moving to the requiredlift position. B
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1228■■■■■■■■tiamo 2.45.6.7.6 STIR5.6.7.6.1 STIR - OverviewDialog window: Method ▶ STIR ▶ Properties... ▶ STIR - &a
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1229Identifi-cationDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variable
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1230■■■■■■■■tiamo 2.4StirrerStirreron | off (Default value: off)Selection of the stirrer.Titrando, 730, 846, 856, 86
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1231ActionSelection Switch on | Switch off | Period of operationDefault value Switch onSwitch onSwitch
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1232■■■■■■■■tiamo 2.4AppearanceThe command has the following appearance:ParametersThe parameters for the command RAC
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1233not definedIn this case, the device name must be assigned by the user at the startof the method.Dev
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■109the determination. For sample identifications of the type Date/Time, theentry must be made in the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1234■■■■■■■■tiamo 2.4ParametersThe parameters for the command HEATER are configured in the follow-ing dialog window:
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1235If the option not defined is selected as Device name, any device typesor device groups which are ab
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1236■■■■■■■■tiamo 2.4Max. waiting timeIf the Target temperature is not reached within the defined Heatingtime then t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1237Init.temp.With Init.temp. the cuvette heating is switched on at the same timeas the device and the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1238■■■■■■■■tiamo 2.45.6.7.9.2 FLOW - PropertiesDialog window: Method ▶ FLOW ▶ Properties... ▶ FLOW - 'Command
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1239ted in the manual. For the 874 USB Oven Sample Processor, these valuescan be found in the table Gas
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1240■■■■■■■■tiamo 2.4AppearanceThe command has the following appearance:ParametersThe parameters for the command RLS
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1241not definedIn this case, the device name must be assigned by the user at the startof the method.Dev
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1242■■■■■■■■tiamo 2.4Calculation overviewAll defined results are displayed in a table in the properties window of th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1243Designa-tionDescription.NSR Statistics actual counter for the result.NST Statistics setpoint counte
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■110■■■■■■■■tiamo 2.4Jump to the first line in the sample table.Jump to the previous line in the sample table.Op
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1244■■■■■■■■tiamo 2.4[Templates]Open the dialog window Manage templates in order to delete orrename result templates
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1245EmptyLoads an empty result template. Pressing [Continue >> ] causes thedialog window Result -
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1246■■■■■■■■tiamo 2.4Selecting a common variableAll of the common variables of the formula template will be listed.&
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12475.6.8.2.5 CALC - Result properties5.6.8.2.5.1 Result - DefinitionTab: Method ▶ CALC ▶ Properties.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1248■■■■■■■■tiamo 2.4noneThe result will be assigned to no result column and displayed only inthe subwindow Results
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1249Result monitoringResult monitoringon | off (Default value: off)The question of whether the result i
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1250■■■■■■■■tiamo 2.4Message by E-mailon | off (Default value: off)If this option is enabled, the message defined in
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1251Save result as common variableon | off (Default value: off)The result will be saved under the selec
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1252■■■■■■■■tiamo 2.4NOTEIf no solutions have been defined, then the selection box will be empty.The creation of sol
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12535.6.8.2.6 CALC - Result templates5.6.8.2.6.1 Manage result templatesDialog window: Method ▶ CALC
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1113.3.1.5 Duplicate sample dataDialog window: Workplace ▶ Sample table / Determination series ▶ [E
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1254■■■■■■■■tiamo 2.4Entry 100 charactersDefault value 'Name of result template'DescriptionFreely definabl
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1255Identifi-cationDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variable
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1256■■■■■■■■tiamo 2.45.6.8.4 REPORT5.6.8.4.1 REPORT - OverviewDialog window: Method ▶ REPORT ▶ Properties... ▶ REP
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12575.6.8.4.2 REPORT - PropertiesDialog window: Method ▶ REPORT ▶ Properties... ▶ REPORT - 'Comma
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1258■■■■■■■■tiamo 2.45.6.8.5 EXPORT5.6.8.5.1 EXPORT - OverviewDialog window: Method ▶ EXPORT ▶ Properties... ▶ EXP
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1259Selection 'Export template'5.6.9 Communications commands5.6.9.1 Communications commands
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1260■■■■■■■■tiamo 2.4AppearanceThe command has the following appearance:ParametersThe parameters for the command CTR
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1261not definedIn this case, the device name must be assigned by the user at the startof the method.Dev
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1262■■■■■■■■tiamo 2.4SpectrometerSelection Bit-pattern with exactly 10 characters (0, 1, *,p) | ********** | Signal
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1263Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874Robotic Titrosampler: 855AppearanceThe comm
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■112■■■■■■■■tiamo 2.43.3.1.7 Exporting sample dataDialog window:Workplace ▶ Tools ▶ Sampletable ▶ Open… ▶ [Open
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1264■■■■■■■■tiamo 2.4Selection 'Device name' | not definedDefault value not definednot definedIn this case
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1265*******1 expects an active input line 0 (1 = set). For example, this line isset by a Titrino after
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1266■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated in the method run by thecommand
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12675.6.9.4.3 SEND - Send event messageDialog window: Method ▶ SEND ▶ Properties... ▶ [New]/ [Properti
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1268■■■■■■■■tiamo 2.4Receiver Selec-tionEventmes-sageSignificanceCommand All trackcom-mandsHold Hold selected track.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1269NOTEIn order that the event message from the SEND command can be han-dled by the RECEIVE command, t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1270■■■■■■■■tiamo 2.4Designa-tionDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variabl
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1271Max. waiting timeon | off (Default value: off)If this option is activated, then a maximum waiting t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1272■■■■■■■■tiamo 2.4Event/StatusType Significance Com-mandsEnd Event The command has just now beenended.AllDosing E
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12735.6.9.6 TRANSFER5.6.9.6.1 TRANSFER - OverviewDialog window: Method ▶ TRANSFER ▶ Properties... ▶ T
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■113Selection Sample table test running… | Sample tabletest stopped manually | Sample table test fin-
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1274■■■■■■■■tiamo 2.4DeviceDevice nameSelection of a device from those available in the device table. The onlydevice
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1275[Delete]Deletes the selected transfer command.Timeouton | off (Default value: off)If this option is
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1276■■■■■■■■tiamo 2.4PollThe character string defined in Command (optional) will be sent to thedevice; an answer is
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1277Regular Expressions can be entered. You can use these exactly definedsearch patterns to interpret t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1278■■■■■■■■tiamo 2.45.6.9.7 WEIGH5.6.9.7.1 WEIGH - OverviewDialog window: Method ▶ WEIGH ▶ Properties... ▶ WEIGH
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1279DeviceDevice nameSelection of a device from those available in the device table. The onlydevices wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1280■■■■■■■■tiamo 2.4ShimadzuEntry ID08Max. waiting timeMaximum time during which the balance data is waited for.Val
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1281ParametersThe parameters for the command REQUEST are configured in the follow-ing dialog window:■ R
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1282■■■■■■■■tiamo 2.4NOTEIf the run should not be stopped (for example for back-weighing inKF titrations), the REQUE
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1283ied during the method run (see Chapter 5.6.10.2.3, page 1283). The texteditor for entering or chang
■■■■■■■■■■■■■■■■■■■■■■Table of contentstiamo 2.4■■■■■■■■XI7.16.2 Properties - General ... 1572
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■114■■■■■■■■tiamo 2.4CommentComment on the sample table that was entered on the tab Comment ascomment concerning
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1284■■■■■■■■tiamo 2.4NOTEIf the sample identifications are still invalid at the start of the methodand are not enter
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12855.6.10.3 CALL5.6.10.3.1 CALL - OverviewDialog window: Method ▶ CALL ▶ Properties.. ▶ CALL - &apos
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1286■■■■■■■■tiamo 2.45.6.10.3.2 CALL - PropertiesDialog window: Method ▶ CALL ▶ Properties... ▶ CALL - Call #Comman
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1287Track nameSelecting the track to be called. All the normal tracks defined in themethod can be selec
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1288■■■■■■■■tiamo 2.4The LOOP command is at the end of the loop for Repeat loops. As soonas one stop condition is fu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1289(case 1), the loop is run through. It is possible with certain stop conditionsthat the loop is neve
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1290■■■■■■■■tiamo 2.4Maximum run numberon | off (Default value: on)If this option is enabled, then the maximum numbe
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■12915.6.10.5 WAIT5.6.10.5.1 WAIT - OverviewDialog window: Method ▶ WAIT ▶ Properties... ▶ WAIT - &apo
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1292■■■■■■■■tiamo 2.4Selection Stop track and waiting for [Continue] | Stopall tracks and waiting for [Continue] | W
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■1293[E-mail]Open the dialog window Send E-mail for defining the E-mail parameters(see Chapter 2.6.1, pa
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■115■ Properties - EditOptions for editing the sample table in the dialog windows Sampletable and Edi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■1294■■■■■■■■tiamo 2.45.6.10.6.2 SEQUENCE - PropertiesDialog window: Method ▶ SEQUENCE ▶ Properties... ▶ SEQUENCE -
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■12956 Configuration6.1 Configuration - General6.1.1 Configuration - DefinitionProgram part: C
6.1 Configuration - General■■■■■■■■■■■■■■■■■■■■■■1296■■■■■■■■tiamo 2.46.1.3 Configuration - Menu bar6.1.3.1 Configuration - Main menusProgram part:
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1297Load view...Load a saved configuration view (see Chapter 3.1.7.3, page 101).Save view...Save
6.1 Configuration - General■■■■■■■■■■■■■■■■■■■■■■1298■■■■■■■■tiamo 2.46.1.3.5 Menu HelpProgram parts: Workplace / Database / Method / ConfigurationSt
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1299■ Sample solution (TC conductivity)Display of the data for the calculation of the temperatur
6.1 Configuration - General■■■■■■■■■■■■■■■■■■■■■■1300■■■■■■■■tiamo 2.4Export/Import of configuration data■ Export configuration data■ Import configura
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1301Automatic saveIf the corresponding option is activated in the program part Configura-tion un
6.1 Configuration - General■■■■■■■■■■■■■■■■■■■■■■1302■■■■■■■■tiamo 2.4Add the selected subwindow to the view.Remove the selected subwindow from the vi
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1303[Save]Save the view under the given name. The saved views are globally validand available fo
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■116■■■■■■■■tiamo 2.4Sample numberon | off (Default value: on)Enable/disable the display of the field Sample num
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1304■■■■■■■■tiamo 2.4With the menu item File ▶ Print (PDF)... ▶ User administration, theuser administration da
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1305Group dataGroup nameDisplay of the name of the user group.DescriptionDescription of the user
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1306■■■■■■■■tiamo 2.46.2.1.2.2 User administration - Access rightsDialog window: Configuration ▶ Tools ▶ User
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1307Selection off | onDefault value offSignature level 2 (Lock)If this check box is activated, t
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1308■■■■■■■■tiamo 2.4Selection off | onDefault value offNOTEIn the Administrators group all signature rights a
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13096.2.1.2.5 Adding a user groupDialog window: Configuration ▶ Tools ▶ User administration...
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1310■■■■■■■■tiamo 2.46.2.1.2.8 Deleting a user groupFunction: Configuration ▶ Tools ▶ User administration...
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1311removedUsers in the status removed can no longer log in. If the set status of auser is chang
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1312■■■■■■■■tiamo 2.4UserShort name of the new user that must be used to log in at program start.After the nam
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1313Security settings can be exported and imported. This means that these set-tings can be excha
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■117Entry 50 charactersDefault value ID1…3ID4 … ID16on | off (Default value: off)Enable/disable the d
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1314■■■■■■■■tiamo 2.4Enforce login with passwordIf this check box is activated, then each time the program sta
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1315NOTEFor Windows 2000, proceed as follows for password monitoring byWindows:1. Start/execute
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1316■■■■■■■■tiamo 2.4NOTEIf the automatic logout is enabled (see below), then only the same useror a user with
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1317Password policiesNOTEIf the Password monitoring by Windows option is enabled, thenthe parame
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1318■■■■■■■■tiamo 2.4Input range 1 - 999 daysDefault value 365 days6.2.2.3 Test login for password monitoring
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1319Selection on | offDefault value offFDA default: on (can no longer be edited)Comment on modif
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1320■■■■■■■■tiamo 2.4Sign each determination separatelyIf this check box is activated, then each determination
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13216.2.2.7 Sending e-mailDialog window: Configuration ▶ Tools ▶ Security settings ▶ Login/Pass
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1322■■■■■■■■tiamo 2.4POP serverAddress of the POP mail server.Entry 200 charactersPortPort number of the POP m
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13236.2.3.2 Backup directories6.2.3.2.1 Backup directoriesTab: Configuration ▶ Tools ▶ User ad
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■118■■■■■■■■tiamo 2.4will be written into the same line. This means that it is possible,for example, to fill a l
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1324■■■■■■■■tiamo 2.4NOTEIf the backup directory is on a network drive the saving date should beadded manually
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1325NOTEMake sure that you have read and write permission on the selecteddirectory.6.2.3.3 Clie
6.2 Administration■■■■■■■■■■■■■■■■■■■■■■1326■■■■■■■■tiamo 2.4License codeShows the entered license code.Number of clientsShows the number of clients t
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13276.2.3.5 Adding licensesDialog window: Configuration ▶ Tools ▶ Program administration ▶ Lice
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1328■■■■■■■■tiamo 2.4Global Variableson | off (Default value: on)Exporting configuration data for global v
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1329Export templateson | off (Default value: on)Exporting saved export templates (see Chapter 4.
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1330■■■■■■■■tiamo 2.4Security settingson | off (Default value: on)Exporting security settings (see Chapter
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1331Common Variableson | off (Default value: on)Importing configuration data for common variable
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1332■■■■■■■■tiamo 2.4Result templateson | off (Default value: on)Importing saved result templates (see Cha
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1333Electrode type templateson | off (Default value: on)Importing saved electrode type templates
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■119Uniton | off (Default value: on)If this option is activated, then the content of this field will
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1334■■■■■■■■tiamo 2.4IntervalEntry of the time interval after which an automatic backup will take place.Wi
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1335NOTEIf the backup directory is on a network drive, then the date of thebackup should be adde
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1336■■■■■■■■tiamo 2.46.3.3 Templates6.3.3.1 Templates - Custom calibration buffers6.3.3.1.1 Managing te
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1337NOTEFor your own calibration buffers you should enter the pH values for thetemperature range
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1338■■■■■■■■tiamo 2.41 = Line active and* = Any line status.Selection Bit pattern with 8 characters (0, 1,
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1339Creating new template or editing templateWith <New> or <Edit> the dialog window
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1340■■■■■■■■tiamo 2.4Examples for 765 DosimatParameters Binary pattern FunctionStart Dos1 *******p****** S
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1341NameName of the conductivity standard.Entry 25 charactersCommentComment on the conductivity
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1342■■■■■■■■tiamo 2.46.3.3.5 Templates - E-mail6.3.3.5.1 Managing e-mail templatesDialog window: Configu
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1343SenderE-mail addressE-mail address of the sender.Entry 1 … 200 charactersSMTP serverAddress
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■120■■■■■■■■tiamo 2.4Actions for marked sample table linesSelection Pause series ([Pause] ) and show message | S
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1344■■■■■■■■tiamo 2.46.3.3.6 Templates - Electrode types6.3.3.6.1 Managing templates for electrode types
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13456.3.3.6.3 Excellent electrodeTab: Configuration ▶ Tools ▶ Templates ▶ Electrode types... ▶
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1346■■■■■■■■tiamo 2.4Max. offset potentialMaximum permitted offset voltage (voltage at pH = 7.0). This val
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1347Min. offset potentialMinimum permitted offset voltage (voltage at pH = 7.0). This value appl
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1348■■■■■■■■tiamo 2.4which the measured voltage has reached this comparison value except for±1 mV.Input ra
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1349Electrode type "Gel"Parameters ExcellentelectrodeGoodelectrodeUsableelectrodeMax.
6.3 Configuration data■■■■■■■■■■■■■■■■■■■■■■1350■■■■■■■■tiamo 2.46.3.4.2 Options - GeneralTab: Configuration ▶ Tools ▶ Options... ▶ Options ▶ General
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13516.3.4.3 Options - SaveTab: Configuration ▶ Tools ▶ Options... ▶ Options ▶ SaveSave on closi
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1352■■■■■■■■tiamo 2.4Modifying the document allowedon | off (Default value: on)If this check box is deactivated,
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13536.4.1.3 Audit Trail - Menu bar6.4.1.3.1 Audit Trail - Main menusProgram window: Configurat
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■121BalanceSelection of the balance from which data is to be imported.Selection Device nameSelection
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1354■■■■■■■■tiamo 2.4Special filter...Define and apply a special filter (see Chapter 6.4.2.3.4.1, page 1360).Remo
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13556.4.1.5 Audit Trail - Filter selectionProgram window: Configuration ▶ Tools ▶ Audit Trail..
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1356■■■■■■■■tiamo 2.4Jumps to last set of entries in the Audit Trail table.6.4.1.7 Audit Trail - FunctionsProgra
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1357Information about errors or incorrect actions. These actions are addition-ally shown with a
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1358■■■■■■■■tiamo 2.4If the contents of a field is larger than the column width, then the wholecontents will be s
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13596.4.2.3 Filtering the Audit Trail6.4.2.3.1 Filter Audit TrailProgram window: Configuration
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1360■■■■■■■■tiamo 2.46.4.2.3.4 Audit Trail - Special filter6.4.2.3.4.1 Special filter tableDialog window: Audit
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1361Insert new lineInsert a new empty line above the line selected in the table. The dialog wind
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1362■■■■■■■■tiamo 2.4Selection Text | Number | DateDefault value TextOperatorSelection of the comparison operator
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1363Match caseon | off (Default value: off)If this option is activated, then upper/lower case wi
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■122■■■■■■■■tiamo 2.4Confirmation necessary to accept data during the determination.on | off (Default value: off
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1364■■■■■■■■tiamo 2.4NOTEThe Audit Trail table is automatically updated when it is opened, butnot afterwards.6.4.
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1365SelectionSelection All records | Records untilDefault value All recordsAll recordsAll entrie
6.4 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1366■■■■■■■■tiamo 2.4User 2UserShort name of the second user who has the right to delete Audit Trailentries.Entry
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1367NOTEThe Audit Trail table is automatically updated when it is opened, butnot afterwards.6.4.
6.5 Subwindow Devices■■■■■■■■■■■■■■■■■■■■■■1368■■■■■■■■tiamo 2.46.5 Subwindow Devices6.5.1 Configuration - DevicesSubwindow: Configuration ▶ Devices
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1369Device nameDesignation of the device.Device typeType of device.Device serial numberSerial nu
6.5 Subwindow Devices■■■■■■■■■■■■■■■■■■■■■■1370■■■■■■■■tiamo 2.4Table viewThe device table cannot be edited directly. With a click on the column title
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1371After the properties window has been closed the new device with its setparameters is entered
6.5 Subwindow Devices■■■■■■■■■■■■■■■■■■■■■■1372■■■■■■■■tiamo 2.46.5.2.5 Editing ignored devicesDialog window: Configuration ▶ Devices ▶ [Edit] ▶ Igno
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13736.5.3 Device propertiesDialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties… ▶ Prop
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1233.3.2.6 Properties - CommentDialog window: Workplace ▶ Tools ▶ Sampletable ▶ New… ▶ [Sample tabl
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1374■■■■■■■■tiamo 2.4Auxiliary solutionsAuxiliary solutions are used as solutions for the dosing
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1375Next titer determinationDate on which the next titer determination is to be carried out. If
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1376■■■■■■■■tiamo 2.4Column display…Defines the columns for the solution table (see Chapter 6.6.
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1377Adds the selected column to the table.Removes the selected column from the table.Modifies th
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1378■■■■■■■■tiamo 2.4■ TiterInformation about the titer value and titer determination.■ Titer hi
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1379Monitor solutionon | off (Default value: off)If this option is activated, then the working l
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1380■■■■■■■■tiamo 2.4Record messageThe message that the working life has expired will be automat
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1381StatisticsStatistics data will only be shown if the titer has been assigned by the titermeth
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1382■■■■■■■■tiamo 2.4[E-mail...][E-mail...] opens the Send e-mail window (see Chapter 2.6.1, pag
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1383If the warning or intervention limits are breached, then the line numberwill also be shown w
Table of contents■■■■■■■■■■■■■■■■■■■■■■XII■■■■■■■■tiamo 2.49.2.2 Restoring the database ... 16309.2
3.3 Sample tables■■■■■■■■■■■■■■■■■■■■■■124■■■■■■■■tiamo 2.4Window menusThe menu [Edit] below the list of sample tables contains the followingmenu item
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1384■■■■■■■■tiamo 2.4[Limit values]Opens the Limit values for titer dialog window, in which the
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1385Upper limitUpper intervention limit.Entry 10 digitsDefault value 1.05006.6.3.6 Properties -
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1386■■■■■■■■tiamo 2.4Cylinder serial numberSerial number of the cylinder. It is printed on new c
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1387function is carried out, the rate will automatically be reduced to the high-est possible val
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1388■■■■■■■■tiamo 2.4DiameterDiameter of the tubing connecting the stopcock to the dosing tip.In
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13896.6.3.7 Properties - Dosing unitTab: Configuration ▶ Titrants/Solutions ▶ Properties... ▶ D
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1390■■■■■■■■tiamo 2.4Entry 24 charactersDefault value 'empty'Serial numberSerial numbe
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1391Dosing rate Dosing port 2Speed at which dosing is to be carried out at Dosing port 2. The ma
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1392■■■■■■■■tiamo 2.4Tubing parametersDefines the length and diameter of the tubing connected to
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1393LengthLength of tubing attached to Dosing port 2.Input range 0.0 - 999.9 cmDefault value 0.0
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1253.3.3.5 Exporting sample tableDialog window: Workplace ▶ Tools ▶ Sample table ▶ Man-ager… ▶ [Edi
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1394■■■■■■■■tiamo 2.4DiameterDiameter of tubing attached to special port.Input range 0.0 - 9.9 m
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13956.6.3.8 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties
6.6 Subwindow Titrants/Solutions■■■■■■■■■■■■■■■■■■■■■■1396■■■■■■■■tiamo 2.4Message by e-mailon | off (Default value: off)If this option is activated,
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■13976.7 Sensors subwindow6.7.1 Sensors - GeneralSubwindow: Configuration ▶ SensorsSensors subw
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1398■■■■■■■■tiamo 2.4DeviceName of device the sensor is connected to.Measuring inputDevice and measuring in
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1399■ Double-click on the margin between column titles:Sets the optimal column width■ Drag the c
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1400■■■■■■■■tiamo 2.4Modify the sequence of displayed columns by moving the selected columnup and down.6.7.
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1401ValenceSelection of the valence for the self-selected ion. This parameter is onlyvisible if
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1402■■■■■■■■tiamo 2.4■ HistoryShows the last 10 calibration values.■ Electrode testInformation about the el
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1403sensors and the Thermoprobe, the device to which the sensor is con-nected is shown here auto
3.4 Sample assignment table■■■■■■■■■■■■■■■■■■■■■■126■■■■■■■■tiamo 2.4NOTEThe sample assignment table is valid for all opened workplaces and issaved pe
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1404■■■■■■■■tiamo 2.4Only editable if monitoring is switched on.Default value Set to work+ 999 daysMessa
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14056.7.3.3 Properties - Calibration dataTab: Configuration ▶ Sensors ▶ [Edit] ▶ Properties...
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1406■■■■■■■■tiamo 2.4Input range –2,000.0 - 2,000.0 mVDefault value 0.0 mVc (blank)c (blank) is the third c
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1407Calibration dateDate and time of last calibration that is entered automatically after eachau
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1408■■■■■■■■tiamo 2.4Next calibrationDate on which the next calibration is to be carried out. The date can
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1409Cancel determinationThe ongoing determination will be automatically canceled. The follow-ing
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1410■■■■■■■■tiamo 2.4for ISE (+3)Input range –2.147E+9 - 2.147E+9 mVDefault value 16.0 mVfor ISE (–3)Input
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1411for ISE (+4)Input range –2.147E+9 - 2.147E+9 mVDefault value 17.0 mVfor ISE (–4)Input range
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1412■■■■■■■■tiamo 2.4Input range –2.147E+9 - 2.147E+9 mVDefault value 2,000.0 mVCell constant monitoring (f
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1413■ Red, if the values are outside the intervention limits.If the warning or intervention limi
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■127NOTEThe character * itself must be generated with **. It stands for an arbi-trary number of chara
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1414■■■■■■■■tiamo 2.4NOTEThe history graph can be copied to the clipboard with the context-sen-sitive Copy
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1415ELT intervalTime interval to next electrode test. If a value is entered here, then thedate i
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1416■■■■■■■■tiamo 2.4Selection Record message | Display message | CanceldeterminationDefault value Display
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1417Warning limits for slope (for pH and ISE electrodes only)on | off (Default value: off)If thi
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1418■■■■■■■■tiamo 2.4Upper limitUpper warning limit for the slope.for pH electrodeInput range –2.147E+9 - 2
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1419Lower limitLower intervention limit for the slope.for pH electrodeInput range –2.147E+9 - 2.
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1420■■■■■■■■tiamo 2.4for ISE (+1)Input range –2.147E+9 - 2.147E+9 mVDefault value 62.4 mVfor ISE (–1)Input
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1421Input range –2.147E+9 - 2.147E+9 Default value 7.500 Intervention limits for pH(0) (for pH e
6.7 Sensors subwindow■■■■■■■■■■■■■■■■■■■■■■1422■■■■■■■■tiamo 2.4Input range –2.147E+9 - 2.147E+9 mVDefault value –30 mVUpper limitUpper intervention l
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14236.8 Subwindow Colorimetric sensors6.8.1 Colorimetric sensors - GeneralSubwindow: Configura
3.5 Text templates■■■■■■■■■■■■■■■■■■■■■■128■■■■■■■■tiamo 2.43.5 Text templates3.5.1 List of text templatesDialog window: Workplace ▶ Tools ▶ Text te
6.8 Subwindow Colorimetric sensors■■■■■■■■■■■■■■■■■■■■■■1424■■■■■■■■tiamo 2.4c1Calibration coefficient first-order.c2Calibration coefficient second-or
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1425Column display...Define the columns for the table of the colorimetric sensors (see Chapter6.
6.8 Subwindow Colorimetric sensors■■■■■■■■■■■■■■■■■■■■■■1426■■■■■■■■tiamo 2.4The colorimetric sensors can be selected in the Methods part with the var
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1427■ Limit valuesDefinition of the limit value monitoring for outliers and the coefficientof de
6.8 Subwindow Colorimetric sensors■■■■■■■■■■■■■■■■■■■■■■1428■■■■■■■■tiamo 2.4c3Calibration coefficient third-order.Input range -1E+99 - 1E+99 (max. 10
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1429Calibration rangeMinimum and maximum concentration of the calibration solutions. In thisrang
6.8 Subwindow Colorimetric sensors■■■■■■■■■■■■■■■■■■■■■■1430■■■■■■■■tiamo 2.4login, then the user logged in under Windows will be entered automati-cal
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1431Editable only if Calibration data monitoring = on, otherwise inactive.ActionIf during calibr
6.8 Subwindow Colorimetric sensors■■■■■■■■■■■■■■■■■■■■■■1432■■■■■■■■tiamo 2.4Monitoring coefficient of determinationon | off (Default value: off)If th
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1433Calibration dateDate and time of the calibration.Calibration methodName of the method with w
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1293.6 Run subwindow3.6.1 Run - GeneralSubwindow: WorkplaceRun subwindowThe Run subwindow contains
6.8 Subwindow Colorimetric sensors■■■■■■■■■■■■■■■■■■■■■■1434■■■■■■■■tiamo 2.4Warning limits for coefficient of determinationon | off (Default value: o
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14356.9 Subwindow Global variables6.9.1 Configuration - Common variables Subwindow: Configurat
6.9 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1436■■■■■■■■tiamo 2.4UnitUnit of the common variables.Assignment dateDate of the last value assign
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1437New…Adds new common variable manually (see Chapter 6.9.2.2, page 1437).DeleteDeletes the sel
6.9 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1438■■■■■■■■tiamo 2.4Adds the selected column to the table.Removes the selected column from the ta
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14396.9.3.2 Properties - Common variableTab: Configuration ▶ Common variables ▶ [Edit] ▶ Proper
6.9 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1440■■■■■■■■tiamo 2.4Entry 256 charactersAssignment dateDate and time at which the last value was
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1441Message by E-mailon | off (Default value: off)The message is additionally sent to the e-mail
6.9 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1442■■■■■■■■tiamo 2.4ValueThe values are shown in the following colors:■ Blue, if the value has be
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14436.9.3.4 History - LimitsDialog window: Configuration ▶ Common variables ▶ [Edit] ▶ Properti
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■130■■■■■■■■tiamo 2.4MethodDisplays the method for the single determination.Determination seriesThe menu items T
6.10 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1444■■■■■■■■tiamo 2.46.10 Subwindow Global variables6.10.1 Configuration - Global variablesSubw
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1445UnitUnit of global variable.Assignment dateDate of the last value assignment to global varia
6.10 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1446■■■■■■■■tiamo 2.4FunctionsThe menu [Edit] beneath the table of global variables contains the
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1447Adds the selected column to the table.Removes the selected column from the table.Modifies th
6.10 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1448■■■■■■■■tiamo 2.46.10.3.2 Properties - Global variableTab: Configuration ▶ Global variables
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1449Entry 256 charactersAssignment dateDate and time at which the last value was assigned; this
6.10 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1450■■■■■■■■tiamo 2.4MessageThe message options can only be edited if monitoring for global varia
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14516.10.3.3 Properties - HistoryTab: Configuration ▶ Global variables ▶ [Edit] ▶ Properties ▶
6.10 Subwindow Global variables■■■■■■■■■■■■■■■■■■■■■■1452■■■■■■■■tiamo 2.4[Limits]Opens the dialog window Limits for global variable in which the warn
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1453Input range -1.0 E+99 - 1.0E+99 (max. 10 digits) 6.11 Subwindow Sample solutions (TC conduc
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■131■ Single determination - ControlsButtons for starting, stopping, interrupting and resuming determ
6.11 Subwindow Sample solutions (TC conductivity)■■■■■■■■■■■■■■■■■■■■■■1454■■■■■■■■tiamo 2.4TC max.Maximum temperature coefficient in the temperature
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1455or decreasing sequence. The table view can be adapted with the left-handmouse button as foll
6.11 Subwindow Sample solutions (TC conductivity)■■■■■■■■■■■■■■■■■■■■■■1456■■■■■■■■tiamo 2.4Available columnsDisplay of all the fields that can be dis
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14576.11.3 Sample solutions (TC conductivity) properties6.11.3.1 Editing propertiesDialog wind
6.11 Subwindow Sample solutions (TC conductivity)■■■■■■■■■■■■■■■■■■■■■■1458■■■■■■■■tiamo 2.4Input range 1E-08 - 1E+08 Default value 1.0 TC max.Maximum
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1459ValidityValidity period of the data in days. If a value is entered here, then the datein the
6.12 Subwindow Rack data■■■■■■■■■■■■■■■■■■■■■■1460■■■■■■■■tiamo 2.4Display messageA message is displayed and you can select whether you want to con-t
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1461Beaker radius samplesRadius of the beakers on the rack.Beaker sensorDefines the beaker senso
6.12 Subwindow Rack data■■■■■■■■■■■■■■■■■■■■■■1462■■■■■■■■tiamo 2.46.12.2.2 Adding new rackDialog window: Configuration ▶ Rack data ▶ [Edit] ▶ New…
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■14636.12.3 Rack properties6.12.3.1 Editing rack propertiesDialog window: Configuration ▶ Rack
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■132■■■■■■■■tiamo 2.4The button is present only in the status HOLD (determination interrupted)and COND HOLD (con
6.12 Subwindow Rack data■■■■■■■■■■■■■■■■■■■■■■1464■■■■■■■■tiamo 2.4is present or not. With off no check will be made. For the option Roboticarm a swi
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1465Special positionSpecial position for Lift 1. This additional definable position can be usede
6.12 Subwindow Rack data■■■■■■■■■■■■■■■■■■■■■■1466■■■■■■■■tiamo 2.4NOTESpecial beakers should preferably be set at high rack positions so thatsample
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1467NOTESpecial beakers should preferably be set at high rack positions so thatsample series can
6.12 Subwindow Rack data■■■■■■■■■■■■■■■■■■■■■■1468■■■■■■■■tiamo 2.46.12.3.6 Editing rack properties (774)Menu item: Configuration ▶ Rack data ▶ Edit
■■■■■■■■■■■■■■■■■■■■■■6 Configurationtiamo 2.4■■■■■■■■1469selected so that a safe movement across the entire rack is possible at anytime.Input range 0
7.1 874 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1470■■■■■■■■tiamo 2.47 Devices7.1 874 Oven Sample Processor7.1.1 874 Oven Sample Processor - Ove
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1471[Update]Opens the dialog window Load new program version (see Chapter7.17.6, page 1582).This butto
7.1 874 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1472■■■■■■■■tiamo 2.4Input range 3 - 25 mm/sDefault value 25 mm/s7.1.4 Properties - RackTab: Confi
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1473Request for dosing device preparationSelection when the request for carrying out the command PREP
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■133Sample numberThe sample number is set to 0 for all workplaces at the time of each pro-gram start.
7.1 874 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1474■■■■■■■■tiamo 2.4Stirrer serial numberDisplay of the serial number of the connected stirrer.Rem
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1475With the 774 Oven Sample Processor display of the temperature correc-tion set on the device only.I
7.1 874 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1476■■■■■■■■tiamo 2.4MessageThe message options can only be edited if monitoring is switched on.Mes
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■14777.2 867 pH Module7.2.1 867 pH Module - OverviewDialog window: Configuration ▶ Devices ▶ [Edit] ▶
7.2 867 pH Module■■■■■■■■■■■■■■■■■■■■■■1478■■■■■■■■tiamo 2.4Device serial numberShows the serial number of the device.Set to workShows the date on whi
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1479R (25 °C)Nominal resistance of connected NTC sensor.Only visible with temperature sensors of the N
7.2 867 pH Module■■■■■■■■■■■■■■■■■■■■■■1480■■■■■■■■tiamo 2.4allTime interval after which the request to prepare the dosing device willappear.Input ran
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1481Monitoring of GLP validityMonitoring of GLP validityon | off (Default value: off)If this option is
7.3 864 Robotic Balance Sample Processor■■■■■■■■■■■■■■■■■■■■■■1482■■■■■■■■tiamo 2.4ActionThe actions can only be edited if monitoring is switched on.I
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■14837.3.2 Properties - GeneralTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - &a
■■■■■■■■■■■■■■■■■■■■■■Table of contentstiamo 2.4■■■■■■■■XIII9.8 Sample tables ... 16749.
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■134■■■■■■■■tiamo 2.4NOTEWhen a new statistics series is started, the setpoint counter will be resetto the value
7.3 864 Robotic Balance Sample Processor■■■■■■■■■■■■■■■■■■■■■■1484■■■■■■■■tiamo 2.4Entry 1000 charactersDefault value empty7.3.3 Properties - Tower #
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1485815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler, 864Robotic Balance Sample Processor
7.3 864 Robotic Balance Sample Processor■■■■■■■■■■■■■■■■■■■■■■1486■■■■■■■■tiamo 2.4[Edit]Opens the dialog window External position # (see Chapter 7.7.
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■14877.3.5 Properties - Initial positionOn tab Initial position, a position can be defined which is au
7.3 864 Robotic Balance Sample Processor■■■■■■■■■■■■■■■■■■■■■■1488■■■■■■■■tiamo 2.4for Move = Special beakerInput range 1 - 16 Default value 1 for Mov
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1489Connected devicesInformation about the following peripheral devices connected to the MSBconnector
7.3 864 Robotic Balance Sample Processor■■■■■■■■■■■■■■■■■■■■■■1490■■■■■■■■tiamo 2.4GLP test intervalTime interval to next GLP test. If a value is ente
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1491Display messageA message is displayed and you can select whether you want to con-tinue the sequenc
7.4 856 Conductivity Module■■■■■■■■■■■■■■■■■■■■■■1492■■■■■■■■tiamo 2.4[Update]Opens the dialog window Load new program version (see Chapter7.17.6, pag
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1493Temperature sensorSelects the type of temperature sensor connected to the measuring input.With the
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■135Input range 1 - 999 (Increment: 1)Default value 'empty' ID1…ID16Sample identifications
7.4 856 Conductivity Module■■■■■■■■■■■■■■■■■■■■■■1494■■■■■■■■tiamo 2.4Time intervalon | off (Default value: off)If this option is switched on then the
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1495Entry 1000 charactersMonitoring of GLP validityMonitoring of GLP validityon | off (Default value:
7.5 855 Robotic Titrosampler■■■■■■■■■■■■■■■■■■■■■■1496■■■■■■■■tiamo 2.4ActionThe actions can only be edited if monitoring is switched on.If during mon
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1497■ GLPInformation on GLP tests and GLP monitoring.7.5.2 Properties - GeneralTab: Configuration ▶ D
7.5 855 Robotic Titrosampler■■■■■■■■■■■■■■■■■■■■■■1498■■■■■■■■tiamo 2.4Entry 1000 charactersDefault value empty7.5.3 Properties - Measuring inputsTab
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■14997.5.4 Properties - Tower #Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - &a
7.5 855 Robotic Titrosampler■■■■■■■■■■■■■■■■■■■■■■1500■■■■■■■■tiamo 2.4815 Robotic USB Sample Processor XL, 855 Robotic Titrosampler, 864Robotic Balan
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1501[Edit]Opens the dialog window External position # (see Chapter 7.7.9, page1521) in which the param
7.5 855 Robotic Titrosampler■■■■■■■■■■■■■■■■■■■■■■1502■■■■■■■■tiamo 2.47.5.6 Properties - Initial positionOn tab Initial position, a position can be
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1503for Move = Special beakerInput range 1 - 16 Default value 1 for Move = External positionInput rang
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■136■■■■■■■■tiamo 2.4NOTESample position, ID1 - ID16, Sample size and Sample size unitcan be changed live for a
7.5 855 Robotic Titrosampler■■■■■■■■■■■■■■■■■■■■■■1504■■■■■■■■tiamo 2.4Connected devicesInformation about the following peripheral devices connected t
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1505GLP test intervalTime interval to next GLP test. If a value is entered here then the date inthe fi
7.6 846 Dosing Interface■■■■■■■■■■■■■■■■■■■■■■1506■■■■■■■■tiamo 2.4Display messageA message is displayed and you can select whether you want to con-ti
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1507[Update]Opens the dialog window Load new program version (see Chapter7.17.6, page 1582).This butto
7.6 846 Dosing Interface■■■■■■■■■■■■■■■■■■■■■■1508■■■■■■■■tiamo 2.4On attaching an exchange/dosing uniton | off (Default value: on)If this option is s
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15097.6.4 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - '
7.6 846 Dosing Interface■■■■■■■■■■■■■■■■■■■■■■1510■■■■■■■■tiamo 2.4Message by e-mailon | off (Default value: off)If this option is activated, the mess
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15117.7 814/815 USB Sample Processor7.7.1 814/815 USB Sample Processor - OverviewDialog window: Conf
7.7 814/815 USB Sample Processor■■■■■■■■■■■■■■■■■■■■■■1512■■■■■■■■tiamo 2.4[Update]Opens the dialog window Load new program version (see Chapter7.17.6
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1513defined in Rack table(see Chapter 6.12.2.1, page 1460) for generalSample positions(see Chapter 6.1
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■137ID1…ID16Sample identifications ID1…ID16. Any text may be entered into this field,the checking for
7.7 814/815 USB Sample Processor■■■■■■■■■■■■■■■■■■■■■■1514■■■■■■■■tiamo 2.4Input range 0 - 235 mmDefault value 0 mm[Configuration]Opens the dialog win
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1515Shift rateSample rack speed of rotation for manual operation.Input range 3 - 20 °/sDefault value 2
7.7 814/815 USB Sample Processor■■■■■■■■■■■■■■■■■■■■■■1516■■■■■■■■tiamo 2.4Special beakerSpecial position on the rack defined in the rack properties.
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1517On attaching an exchange/dosing uniton | off (Default value: on)If this option is switched on then
7.7 814/815 USB Sample Processor■■■■■■■■■■■■■■■■■■■■■■1518■■■■■■■■tiamo 2.47.7.7 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties..
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1519Message by e-mailon | off (Default value: off)If this option is activated, the message is sent to
7.7 814/815 USB Sample Processor■■■■■■■■■■■■■■■■■■■■■■1520■■■■■■■■tiamo 2.4Swing offsetSwing angle offset for specific robotic arm model. This value m
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15217.7.9 External position Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - &apo
7.8 778/789 Sample Processor■■■■■■■■■■■■■■■■■■■■■■1522■■■■■■■■tiamo 2.4■ MSB #Properties of the MSB connector 1...3 and the peripheral devices con-nec
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1523Only visible and editable with Sartorius balancesSelection on | offDefault value offRemarksRemarks
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■138■■■■■■■■tiamo 2.4NOTEGenerally speaking, no formula input is possible in these fields.If the option Comment
7.8 778/789 Sample Processor■■■■■■■■■■■■■■■■■■■■■■1524■■■■■■■■tiamo 2.4Input range 100.0 - 300.0 mm814 USB Sample ProcessorSelection 166.0 mmDefault v
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1525Work position [mm]Work position for external position.[Edit]Opens the dialog window External posit
7.8 778/789 Sample Processor■■■■■■■■■■■■■■■■■■■■■■1526■■■■■■■■tiamo 2.47.8.5 Properties - MSB #Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties...
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1527Stirrer 1Stirrer typeDisplay of the stirrer type.Stirrer serial numberDisplay of the serial number
7.8 778/789 Sample Processor■■■■■■■■■■■■■■■■■■■■■■1528■■■■■■■■tiamo 2.47.8.7 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1529Message by e-mailon | off (Default value: off)If this option is activated, the message is sent to
7.9 774 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1530■■■■■■■■tiamo 2.47.9 774 Oven Sample Processor7.9.1 774 Oven Sample Processor - OverviewDialo
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1531Program versionShows the program version of the device.Only visible with devices that have their o
7.9 774 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1532■■■■■■■■tiamo 2.4Beaker sensorShows whether the beaker sensor for the tower is switched on or o
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15337.9.5 Properties - Dosing deviceTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Propertie
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■139■ Check solutionsCheck whether the solutions required in the instrument-specific com-mands are pr
7.9 774 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1534■■■■■■■■tiamo 2.4Max. temperatureWith the 774 Oven Sample Processor display of the maximum temp
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15357.9.8 Properties - RS-232Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - '
7.9 774 Oven Sample Processor■■■■■■■■■■■■■■■■■■■■■■1536■■■■■■■■tiamo 2.4Monitoring of GLP validityMonitoring of GLP validityon | off (Default value: o
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1537ActionThe actions can only be edited if monitoring is switched on.If during monitoring it is found
7.10 756/831 Coulometer■■■■■■■■■■■■■■■■■■■■■■1538■■■■■■■■tiamo 2.4Entry 50 charactersDefault value Device type number_#Device typeDisplay of the devic
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1539Selection COM1 | COM2 | … | COMnDefault value COMnCOMnFirst free COM port.Baud rateTransmission sp
7.10 756/831 Coulometer■■■■■■■■■■■■■■■■■■■■■■1540■■■■■■■■tiamo 2.4GLP test intervalTime interval to next GLP test. If a value is entered here then the
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1541Display messageA message is displayed and you can select whether you want to con-tinue the sequenc
7.11 730 Sample Changer■■■■■■■■■■■■■■■■■■■■■■1542■■■■■■■■tiamo 2.4Device typeDisplay of the device type.Program versionShows the program version of th
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1543On the tab Towers the tower parameters for Tower 1 and Tower 2 (ifpresent) are shown for the 730 S
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■140■■■■■■■■tiamo 2.4■ Reserve devices (modules)The devices and/or their function units used by the device-depen
7.11 730 Sample Changer■■■■■■■■■■■■■■■■■■■■■■1544■■■■■■■■tiamo 2.4Sample Processor in order to recognize the rack. If no rack is in positionthen the d
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15457.11.6 Properties - RS-232Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - &apos
7.11 730 Sample Changer■■■■■■■■■■■■■■■■■■■■■■1546■■■■■■■■tiamo 2.4Monitoring of GLP validityMonitoring of GLP validityon | off (Default value: off)If
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1547ActionThe actions can only be edited if monitoring is switched on.If during monitoring it is found
7.12 712 Conductometer■■■■■■■■■■■■■■■■■■■■■■1548■■■■■■■■tiamo 2.4Entry 50 charactersDefault value Device type number_#Device typeDisplay of the device
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1549Selection COM1 | COM2 | … | COMnDefault value COMnCOMnFirst free COM port.Baud rateTransmission sp
7.12 712 Conductometer■■■■■■■■■■■■■■■■■■■■■■1550■■■■■■■■tiamo 2.4GLP test intervalTime interval to next GLP test. If a value is entered here then the
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1551Display messageA message is displayed and you can select whether you want to con-tinue the sequenc
7.13 089 Photometer■■■■■■■■■■■■■■■■■■■■■■1552■■■■■■■■tiamo 2.4[Update]Opens the dialog window Load new program version (see Chapter7.17.6, page 1582).
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1553Light source always activeon | off (Default value: on)If this check box is activated, then the LED
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■141■ Conditioning condition not fulfilledAfter conditioning starts, the status switches to COND BUSY
7.13 089 Photometer■■■■■■■■■■■■■■■■■■■■■■1554■■■■■■■■tiamo 2.47.13.5 Properties - MSB #Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Proper
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1555Stirrer 1Stirrer typeDisplay of the stirrer type.Stirrer serial numberDisplay of the serial number
7.13 089 Photometer■■■■■■■■■■■■■■■■■■■■■■1556■■■■■■■■tiamo 2.42.5.1, page 90). After the date has been entered the field GLP testinterval will be adju
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15577.14 Avantes spectrometer7.14.1 Avantes spectrometer - OverviewDialog window: Configuration ▶ De
7.14 Avantes spectrometer■■■■■■■■■■■■■■■■■■■■■■1558■■■■■■■■tiamo 2.47.14.2 Properties - GeneralTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties...
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1559Entry 1000 charactersDefault value empty7.14.3 Properties - SettingsTab: Configuration ▶ Devices
7.14 Avantes spectrometer■■■■■■■■■■■■■■■■■■■■■■1560■■■■■■■■tiamo 2.4Only editable if the analog output is switched on.Input range 1 - 214,783,647 mAU/
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1561Selection Factory settings | "Method name"Default value Factory settings[Reset calibrati
7.14 Avantes spectrometer■■■■■■■■■■■■■■■■■■■■■■1562■■■■■■■■tiamo 2.4Averaged spectraNumber of spectra that are recorded and averaged.SmoothingShows th
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1563Integration timeShows the integration time during recording of the reference spectrum.Averaged spe
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■142■■■■■■■■tiamo 2.4Determination parametersSample numberon | off (Default value: on)Enable/disable the display
7.14 Avantes spectrometer■■■■■■■■■■■■■■■■■■■■■■1564■■■■■■■■tiamo 2.4MethodShows the method with which the correction spectrum was recorded.Determinati
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1565Monitoring of GLP validityMonitoring of GLP validityon | off (Default value: off)If this option is
7.15 Barcode reader■■■■■■■■■■■■■■■■■■■■■■1566■■■■■■■■tiamo 2.4ActionThe actions can only be edited if monitoring is switched on.If during monitoring i
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1567Barcode reader as a deviceNOTEIf the functions for automatic data import into sample tables are to
7.15 Barcode reader■■■■■■■■■■■■■■■■■■■■■■1568■■■■■■■■tiamo 2.47.15.3 Properties - GeneralTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Prop
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1569Entry 1000 charactersDefault value empty7.15.4 Properties - SettingsTab: Configuration ▶ Device ▶
7.15 Barcode reader■■■■■■■■■■■■■■■■■■■■■■1570■■■■■■■■tiamo 2.4Monitoring can only be switched on when a date has been entered inthe field GLP test dat
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1571Record messageThe message that the validity period has expired will be automaticallysaved with the
7.16 RS-232 device■■■■■■■■■■■■■■■■■■■■■■1572■■■■■■■■tiamo 2.47.16.2 Properties - GeneralTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Prope
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1573Entry 1000 charactersDefault value empty7.16.3 Properties - RS-232Tab: Configuration ▶ Devices ▶
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■143Copy automatically into the next determinationSample sizeon | off (Default value: on)Sample size
7.16 RS-232 device■■■■■■■■■■■■■■■■■■■■■■1574■■■■■■■■tiamo 2.4TimeoutMaximum waiting time for receiving characters. If this time is exceeded,receiving
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15757.16.4 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - &apos
7.16 RS-232 device■■■■■■■■■■■■■■■■■■■■■■1576■■■■■■■■tiamo 2.4Message by e-mailon | off (Default value: off)If this option is activated, the message is
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1577Input fieldInput field for a message to be sent to the device.[Send]Sends the message shown in the
7.17 Titrando■■■■■■■■■■■■■■■■■■■■■■1578■■■■■■■■tiamo 2.4Device typeDisplay of the device type.Program versionShows the program version of the device.O
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1579Measuring input 1/2 (iConnect)ADC typeShows the type of analog-digital converter.Serial numberShow
7.17 Titrando■■■■■■■■■■■■■■■■■■■■■■1580■■■■■■■■tiamo 2.4At program starton | off (Default value: on)If this option is switched on then at each program
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15817.17.5 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - &apos
7.17 Titrando■■■■■■■■■■■■■■■■■■■■■■1582■■■■■■■■tiamo 2.4Message by e-mailon | off (Default value: off)If this option is activated, the message is sent
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1583Old versionShows the old device program version.New versionShows the new device program version to
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■144■■■■■■■■tiamo 2.43.6.3.9.5 Properties - Data import Tab: Workplace ▶ Run ▶ Single determination ▶ Propertie
7.18 Titrino■■■■■■■■■■■■■■■■■■■■■■1584■■■■■■■■tiamo 2.4Titrino Program version702 SM Titrino 5.702.0021716 DMS Titrino 5.716.0022718 STAT Titrino 5.71
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1585This button is only displayed with devices that have their own firmware. Itis only active if the d
7.18 Titrino■■■■■■■■■■■■■■■■■■■■■■1586■■■■■■■■tiamo 2.4At program starton | off (Default value: on)If this option is switched on then at each program
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1587Time intervalon | off (Default value: off)If this option is switched on then the request to prepar
7.18 Titrino■■■■■■■■■■■■■■■■■■■■■■1588■■■■■■■■tiamo 2.4NOTEThese parameters are only editable for devices with status not ok(power supply and/or RS co
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1589Can only be edited if monitoring is switched on.Default value GLP test date + 999 daysMessageTh
7.19 Balances■■■■■■■■■■■■■■■■■■■■■■1590■■■■■■■■tiamo 2.47.19 Balances7.19.1 Balance - OverviewDialog window: Configuration ▶ Devices ▶ [Edit] ▶ Prop
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1591Set to workShows the date on which the device was automatically added to thedevice table.Data stor
7.19 Balances■■■■■■■■■■■■■■■■■■■■■■1592■■■■■■■■tiamo 2.4Selection None | Odd | EvenDefault value NoneStop bitNumber of stop bits.Selection 1 | 2Defaul
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■15937.19.4 Properties - GLPTab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - &apos
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■145Confirmation necessary to accept data during the determination.on | off (Default value: off)If th
7.19 Balances■■■■■■■■■■■■■■■■■■■■■■1594■■■■■■■■tiamo 2.4Message by e-mailon | off (Default value: off)If this option is activated, the message is sent
■■■■■■■■■■■■■■■■■■■■■■7 Devicestiamo 2.4■■■■■■■■1595Sample sizeSample size.Sample size unitSample size unit.ID1Sample identification ID1.ID2Sample ide
8.1 Manual control - General■■■■■■■■■■■■■■■■■■■■■■1596■■■■■■■■tiamo 2.48 Manual control8.1 Manual control - GeneralProgram part: Manual controlDefin
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■15978.3 Manual control - Device selectionProgram part: Manual controlIn the subwindow for the
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1598■■■■■■■■tiamo 2.4Titrando: 808, 809, 835, 836, 841, 842, 857, 859, 888, 890, 901, 902,904, 905
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1599TiterDisplay of the titer of the attached solution. This field only appears forintelligent
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1600■■■■■■■■tiamo 2.48.4.1.5 Dosing - EmptyingProgram part: Manual controlHere the emptying of do
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1601730, 774, 778, 789Input range 0.01 - 160.00 mL/minTitrinoInput range 0.01 - 150.00 mL/minFi
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1602■■■■■■■■tiamo 2.4NOTEParameters modified after the start of the dosing are not valid until the
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1603device, it will automatically be reduced during dosing to the largest possi-ble value.NOTET
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■146■■■■■■■■tiamo 2.4If the option Comment on modification of sample data (live) isenabled in the security setti
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1604■■■■■■■■tiamo 2.4InstrumentsThe stirrer functions can be carried out with stirrers that are co
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■16058.4.2.3 Stirring - Continuous operationProgram part: Manual controlHere stirrers can be sw
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1606■■■■■■■■tiamo 2.4Dosing Interface: 846Coulometer: 756, 831pH/Ion - Meter: 867Sample Processor:
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1607702, 716, 718, 719, 720, 721, 736, 794Selection Bit-pattern with exactly 8 characters (0, 1
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1608■■■■■■■■tiamo 2.4Sample changer functionsThe sample changer functions are displayed on the fol
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1609Swing rateSwing rate for manual control of the Swing Head on the sample changer.Input range
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1610■■■■■■■■tiamo 2.4Moves to current rack position –1.Moves to current rack position +1.Lift posi
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1611Moves the lift upwards for as long as this button is pressed.Moves the lift downwards for a
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1612■■■■■■■■tiamo 2.4Rack positionAssigning the current rack position to a specific special beaker
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1613730 onlySelection Tower 1 + 2 | External positionsDefault value Tower 1 + 2Shift position f
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■147Stop series (shortcut: Ctrl S)Immediate stop of the running determination (or the conditioning) o
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1614■■■■■■■■tiamo 2.4External positionSelection of the external position to which the current robo
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1615Selection On/Off | DurationDefault value On/OffDurationEntry of the duration during which t
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1616■■■■■■■■tiamo 2.4Gas flowInletSelection of the carrier gas inlet.Selection Pump | ValveDefault
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1617Gas type Gas flow factorOxygen 1.000Nitrogen 1.000[Start]Switches the gas flow on. The time
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1618■■■■■■■■tiamo 2.4DevicesThe measurement functions can be carried out with the following instru
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1619Measuring temperatureTemperature, which can be entered manually. If a temperature sensor is
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1620■■■■■■■■tiamo 2.4856Input range –20.0 - 150.0 °C Default value 20.0 Selection offoffThe conduc
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1621Input range 100.0 - 2000.0 nmDefault value 1000.0 nmIntegration timeIntegration time for sp
8.4 Manual control - Functions■■■■■■■■■■■■■■■■■■■■■■1622■■■■■■■■tiamo 2.4NOTEBefore a sample spectrum can be measured, a reference spectrum hasto be r
■■■■■■■■■■■■■■■■■■■■■■8 Manual controltiamo 2.4■■■■■■■■1623Input range 0 - 100 HzSelection offDefault value offoffFor the continuous type of the light
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■148■■■■■■■■tiamo 2.43.6.4.3 Determination series - Status displayTab: Workplace ▶ Run ▶ Determination seriesTh
9.1 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1624■■■■■■■■tiamo 2.49 How to proceed?9.1 Audit Trail9.1.1 Opening Audit Trail How to proceed?NOTEThe Audit Tr
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1625After this function has been selected, the field in which the cursor islocated will have a
9.1 Audit Trail■■■■■■■■■■■■■■■■■■■■■■1626■■■■■■■■tiamo 2.4The dialog window Audit Trail opens. 3If desired, filter Audit Trail table. 4If desired, sel
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1627 4Enter or select directory and file name for saving the archive file inthe field Save fil
9.2 Backup■■■■■■■■■■■■■■■■■■■■■■1628■■■■■■■■tiamo 2.4 3Archive desired Audit Trail entries. 4With the menu item File ▶ Delete the dialog window Delete
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1629Backing up a database manually 1Select the Database program part. 2Click on the icon or
9.2 Backup■■■■■■■■■■■■■■■■■■■■■■1630■■■■■■■■tiamo 2.4The Properties - Database - 'Database name' dialog windowopens for editing the database
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1631The database restoring is started.NOTEExisting databases cannot be overwritten, i.e. they
9.2 Backup■■■■■■■■■■■■■■■■■■■■■■1632■■■■■■■■tiamo 2.4NOTEIf the backup directory is on a network drive, the backup dateshould be added to the Backup n
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1633 2Start the file ConfigRestore.exe in the program directory …\tiamo\bin.The Restore config
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■149Sample numberThe sample number is set to 0 for all workplaces at the time of each pro-gram start.
9.2 Backup■■■■■■■■■■■■■■■■■■■■■■1634■■■■■■■■tiamo 2.4Backing up configuration data manually 1Select the Configuration program part. 2Click on the File
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1635The Backup configuration data automatically dialog windowcloses.Exporting methods 1Select
9.2 Backup■■■■■■■■■■■■■■■■■■■■■■1636■■■■■■■■tiamo 2.4The Audit Trail dialog window opens. 3Click on the File ▶ Archive… menu item.The Archive Audit Tr
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■16379.3 Determinations9.3.1 Starting single determinationHow to proceed?Single determination
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1638■■■■■■■■tiamo 2.4NOTEIn order to calculate statistical calculations for results, the Statis-tics option mu
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1639 5If a method was loaded in which the option Statistics in the STARTcommand is enabled, di
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1640■■■■■■■■tiamo 2.4NOTEIf the method contains a DATABASE command, then it is manda-tory that this command be
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1641 2Click on the symbol or the menu item File ▶ Open...The dialog window Open database op
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1642■■■■■■■■tiamo 2.4 3Define filter criteria. 4Click on [Save filter]. 5Click on [Apply filter].The table wil
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1643Signature 1NOTEDeterminations can only be signed at level 1 if the user belongs to auser g
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■150■■■■■■■■tiamo 2.4Statisticson | off (Default value: on)This field is displayed only when a method has been l
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1644■■■■■■■■tiamo 2.4 2Enter or select User, Password, Reason and Comment and clickon [Sign].The selected dete
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1645The dialog window Open database opens. 3Select desired database or enter name in the field
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1646■■■■■■■■tiamo 2.4The window Import determinations opens. 6Select desired determinations. 7Click on [Open].
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1647NOTEIf the option Comment on modification of determinations inthe Security settings is ena
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1648■■■■■■■■tiamo 2.49.3.10 Reprocessing determinations How to proceed?NOTEDeterminations that have a signatu
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1649The selected determinations are recalculated. The results of this recal-culation are enter
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1650■■■■■■■■tiamo 2.4The selected determinations are recalculated. The results of this recal-culation are ente
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1651If the determination is switched off then an asterisk (*) appearsbehind all result values
9.3 Determinations■■■■■■■■■■■■■■■■■■■■■■1652■■■■■■■■tiamo 2.4 4Modify curve evaluation manually. 5Then close the window with [OK]. 6Click on [Recalcul
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1653 6Click on the menu item File ▶ Print ▶ Report...The dialog window Report output opens. 7
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■151■ Dark orange backgroundSelected line currently running. If sample data is modified after thestar
9.4 Databases■■■■■■■■■■■■■■■■■■■■■■1654■■■■■■■■tiamo 2.4NOTEA maximum of 4 databases can be opened, but only 2 can be dis-played at the same time. Dat
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1655NOTEEach determination database has to be backed up separately. After-wards, it is recomme
9.4 Databases■■■■■■■■■■■■■■■■■■■■■■1656■■■■■■■■tiamo 2.4Closing all databases 1Select the Database program part. 2Click on the File ▶ Close all menu i
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1657 9On the Monitoring tab, define the monitoring of the size and num-ber of data sets.9.4.5
9.4 Databases■■■■■■■■■■■■■■■■■■■■■■1658■■■■■■■■tiamo 2.4The Database manager dialog window opens. 3Select the desired database. 4Click on [Properties]
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1659 5Select or enter the name for the desired Backup file. 6Enter the name under Save As unde
9.5 Configuration data■■■■■■■■■■■■■■■■■■■■■■1660■■■■■■■■tiamo 2.49.5 Configuration data9.5.1 Configuration data in generalThe configuration data is
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■16619.5.3 Importing configuration dataHow to proceed?1Select the Configuration program part.
9.5 Configuration data■■■■■■■■■■■■■■■■■■■■■■1662■■■■■■■■tiamo 2.4 4Select or enter the name for the backup file in the Backup namefield. If an existin
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■16639.5.5 Restoring configuration dataHow to proceed?tiamo light, tiamo full 1Exit tiamo. 2St
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■152■■■■■■■■tiamo 2.4Copy linesCopies the selected lines to the clipboard.Insert linesPastes lines from the clip
9.6 Methods■■■■■■■■■■■■■■■■■■■■■■1664■■■■■■■■tiamo 2.49.6 Methods9.6.1 Opening a methodHow to proceed?1Select program part Method. 2Click on the sym
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1665Closing all methods 1Select program part Method. 2Click on menu item File ▶ Close all….All
9.6 Methods■■■■■■■■■■■■■■■■■■■■■■1666■■■■■■■■tiamo 2.4 2In the list box Method group select the desired method group. 3Select the desired method from
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■16679.6.6 Export methodHow to proceed?1Select program part Method. 2Click on the symbol or
9.6 Methods■■■■■■■■■■■■■■■■■■■■■■1668■■■■■■■■tiamo 2.4The dialog window Select files to import opens. 5Select desired import files named as 'Meth
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1669The selected method will be signed on level 1.NOTEMethods can be signed more than once at
9.6 Methods■■■■■■■■■■■■■■■■■■■■■■1670■■■■■■■■tiamo 2.49.6.9 Making previous method version current How to proceed?1Select program part Method. 2Click
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1671 6Click on the menu item File ▶ Print (PDF)...The dialog window Print method reports (PDF
9.6 Methods■■■■■■■■■■■■■■■■■■■■■■1672■■■■■■■■tiamo 2.4Backing up configuration data automatically 1Select program part Configuration. 2Click on menu i
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1673NOTEThe exported methods are stored uncoded but with a checksum. Ifa file stored in this m
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■153Import data…Import a sample table from a file with the format *.csv.Export data…Export a sample t
9.8 Sample tables■■■■■■■■■■■■■■■■■■■■■■1674■■■■■■■■tiamo 2.49.7.2 Deleting method groupHow to proceed?1Select program part Method. 2Click on the symb
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1675 6In the dialog window Sample table 'New sample table', click onthe menu item Ed
9.8 Sample tables■■■■■■■■■■■■■■■■■■■■■■1676■■■■■■■■tiamo 2.4The dialog window with the selected sample table opens. 5Click on the menu item Sample tab
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■16779.8.3 Loading working sample tableHow to proceed?1Select program part Workplace. 2In subw
9.9 Reports■■■■■■■■■■■■■■■■■■■■■■1678■■■■■■■■tiamo 2.4 9In the list box Method, select the desired method and enter sampledata. 10Click on [Apply].The
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1679 3Click on the menu item File ▶ Page setup… in the program win-dow Report template.The dia
9.9 Reports■■■■■■■■■■■■■■■■■■■■■■1680■■■■■■■■tiamo 2.49.9.2 Edit report templateHow to proceed?1Select program part Database. 2Click on the symbol
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1681 4Repeat steps 1 and 2 for each desired module. Creating new modules 1Select desired modul
9.9 Reports■■■■■■■■■■■■■■■■■■■■■■1682■■■■■■■■tiamo 2.4NOTEA maximum of 4 databases can be opened, but only 2 can be dis-played at the same time. Datab
■■■■■■■■■■■■■■■■■■■■■■9 How to proceed?tiamo 2.4■■■■■■■■1683 4Click on [Open].The selected database opens and its data sets are displayed in theDeterm
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■11 Introduction1.1 Welcome to tiamoIntroductiontiamo = titration and moretiamo is a control and
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■154■■■■■■■■tiamo 2.43.6.4.8 Determination series - Determination run Tab: Workplace ▶ Run ▶ Determination seri
Index■■■■■■■■■■■■■■■■■■■■■■1684■■■■■■■■tiamo 2.4IndexNumbers/Symbols21 CFR 11 21, 1312, 1313, 1318,1319089 PhotometerAdjustment ... 1
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1685Beaker radius 1469, 1484, 1499,1512, 1523Rack parameters ... 1463Rack table ...
Index■■■■■■■■■■■■■■■■■■■■■■1686■■■■■■■■tiamo 2.4Command ... 437Alphabetical overview ... 438Calibration command ... 1
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1687814 USB Sample Processor... 1511815 Robotic USB Sample Pro-cessor
Index■■■■■■■■■■■■■■■■■■■■■■1688■■■■■■■■tiamo 2.4Subwindow ... 198Toolbar ... 196View ... 99,
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1689814 USB Sample Processor... 1511815 Robotic USB Sample Pro-cessor
Index■■■■■■■■■■■■■■■■■■■■■■1690■■■■■■■■tiamo 2.4Overview ... 1122ELT MEAS ... 1125Command variables ...
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1691MET U ... 620MET Upol ... 672SET Ipol ...
Index■■■■■■■■■■■■■■■■■■■■■■1692■■■■■■■■tiamo 2.4Integer ... 73Intersection line evaluation ... 325KKFC ...
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1693Evaluation ... 1053Fixed endpoint evaluation...
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■155NOTEWhen it is in the status READY, the start test can also be triggeredmanually with the symbol
Index■■■■■■■■■■■■■■■■■■■■■■1694■■■■■■■■tiamo 2.4Additional measured values... 590Command variables ... 56
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1695MOVE ... 1215Automatic solution exchange...
Index■■■■■■■■■■■■■■■■■■■■■■1696■■■■■■■■tiamo 2.4Rack table ... 1460Special beaker ... 1465Special beaker (774) ...
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1697RLS DOS ... 1212Command variables ... 1212Overview ...
Index■■■■■■■■■■■■■■■■■■■■■■1698■■■■■■■■tiamo 2.4Series start track ... 433, 452SET ... 693Control rang
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1699Start drift 711, 733, 756, 777,800, 822, 839, 855Start key ... 131, 146Start
Index■■■■■■■■■■■■■■■■■■■■■■1700■■■■■■■■tiamo 2.4TTable of global variablesTable ... 1444Tabular report ...
■■■■■■■■■■■■■■■■■■■■■■Indextiamo 2.4■■■■■■■■1701General ... 1303Options ... 1308Short name ...
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■156■■■■■■■■tiamo 2.46 - Main runThe following actions may be carried out during processing of the methodloaded:
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■157continued with [Cont]. If an error occurs during conditioning, neither theerror track nor the exi
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■158■■■■■■■■tiamo 2.4SavedDate and time when the sample table was saved.Saved byShort name of the user who saved
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■159NOTEGenerally speaking, no formula input is possible in the fields of this dia-log window.MethodE
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■160■■■■■■■■tiamo 2.4ID1…ID16Sample identifications ID1…ID16. Any text may be entered into this field,the checki
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■161NOTEIf data from the current sample data line is modified for the ongoingdetermination, then this
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■162■■■■■■■■tiamo 2.4Functions[Apply]Apply the sample data entered in the respective line of the working sam-ple
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■163NOTENo matter the number of data fields defined on the Display tab, theimport file must always co
1.2 Operation■■■■■■■■■■■■■■■■■■■■■■2■■■■■■■■tiamo 2.4■ Program versions■ What is new in tiamo 2.4?1.2 OperationIntroductionThe modern user interface
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■164■■■■■■■■tiamo 2.4NOTEThe Sample table test is only used to check whether or not all sampledata is correct (i
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■165NameName of the sample table.SavedDate and time when the sample table was saved.Saved byShort nam
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■166■■■■■■■■tiamo 2.4For the Run test, the dialog window Run test - 'Workplace name' -Single determina
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■167OrientationSelection Portrait | LandscapeDefault value PortraitPortraitOutput in portrait format.
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■168■■■■■■■■tiamo 2.4ControlsNOTEThis parameter group is visible only if the dialog window above the tabDetermin
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■169Sample dataNOTEThe names defined here will be used only for the column headings inthe sample tabl
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■170■■■■■■■■tiamo 2.4Entry 50 charactersDefault value Sample sizeUniton | off (Default value: on)Enable/disable
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■171Copy automatically into next lineMethodon | off (Default value: on)If this option is activated, t
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■172■■■■■■■■tiamo 2.43.6.4.10.4 Properties - ProcessDialog window: Workplace ▶ Tools ▶ Sampletable ▶ New… ▶ Sam
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■173Stop series ([Stop])If this option is selected, then the series is stopped before the start ofthe
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■31.3 Device integrationIntroductiontiamo brings together the world of Titrino devices and the ne
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■174■■■■■■■■tiamo 2.4Always accept dataIf this option is selected, then the data sent from the balance is impor-
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■175Import from a fileon | off (Default value: off)If this option is activated, then external data fr
3.6 Run subwindow■■■■■■■■■■■■■■■■■■■■■■176■■■■■■■■tiamo 2.4Entry of a comment on the sample table.Comment on sample tableEntry of a comment on the sam
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1773.7 Subwindow Method3.7.1 Method window - GeneralSubwindow: Workplace ▶ MethodSubwindow MethodT
3.7 Subwindow Method■■■■■■■■■■■■■■■■■■■■■■178■■■■■■■■tiamo 2.4Selection Fit to heightAdjust to height of the window.Selection Fit in windowDefault val
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■179NOTENo live parameters can be edited with methods which have beensigned at Level 2 and thus locke
3.8 Subwindow Live display■■■■■■■■■■■■■■■■■■■■■■180■■■■■■■■tiamo 2.4■ MessagesDisplaying the messages generated during the determination.3.8.2 Live d
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■181CancelCancel the active command of the track.Properties - Live dis-playSet properties of the live
3.8 Subwindow Live display■■■■■■■■■■■■■■■■■■■■■■182■■■■■■■■tiamo 2.4Measured value displayon | off (Default value: off)If this option is activated the
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■183MEAS TMFSelection Time | Measured value | Transmission | Tem-perature | dMW/dt | offDefault value
1.4 Method editor■■■■■■■■■■■■■■■■■■■■■■4■■■■■■■■tiamo 2.41.4 Method editorIntroductionThe new graphic method editor gets more out of your titration s
3.8 Subwindow Live display■■■■■■■■■■■■■■■■■■■■■■184■■■■■■■■tiamo 2.4METSelection Volume | Measured value | Time | Tempera-ture | dMW | Calculated 1…3
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■185DOSSelection Time | Measured value | Temperature | Vol-ume | dV/dt | Calculated 1…3 | External 1…
3.8 Subwindow Live display■■■■■■■■■■■■■■■■■■■■■■186■■■■■■■■tiamo 2.4MEASSelection Measured value | Time | Temperature | dMW/dt | Calculated 1…3 | Exte
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■187METSelection off | Measured value | Volume | Time | Temper-ature | dMW | Calculated 1…3 | Externa
3.8 Subwindow Live display■■■■■■■■■■■■■■■■■■■■■■188■■■■■■■■tiamo 2.4DOSSelection off | Measured value | Volume | Temperature | Time | dV/dt | Calculat
■■■■■■■■■■■■■■■■■■■■■■3 Workplacetiamo 2.4■■■■■■■■1893.9 Subwindow Report3.9.1 Report - GeneralSubwindow: Workplace ▶ ReportSubwindow ReportThe repo
3.9 Subwindow Report■■■■■■■■■■■■■■■■■■■■■■190■■■■■■■■tiamo 2.4DateTime of the compilation of the report, together with date, time and timezone (UTC ±
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■1914 Database4.1 Database - General4.1.1 Database - DefinitionProgram part: DatabaseDefinitionThe
4.1 Database - General■■■■■■■■■■■■■■■■■■■■■■192■■■■■■■■tiamo 2.4ElementsThe desktop of the program part Database comprises the following ele-ments:■ D
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■193Report…PDF file output of the report (see Chapter 4.5.2.12, page 341).Logout...Logout user (see Ch
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■51.5 DatabaseIntroductiontiamo is based on an object-oriented database, that has proven itselfin
4.1 Database - General■■■■■■■■■■■■■■■■■■■■■■194■■■■■■■■tiamo 2.4PropertiesResultsSet the properties for the subwindow Results (see Chapter 4.7, page 3
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■195Import…Import the selected determinations (see Chapter 4.5.2.9, page 339).Show method… Show the me
4.1 Database - General■■■■■■■■■■■■■■■■■■■■■■196■■■■■■■■tiamo 2.4Curve overlaytemplates…Manage curve overlay templates (see Chapter 4.4.3.1, page 253).
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■197CommentEnter a comment on the selected determination (see Chapter 4.5.2.2, page303).Search Open th
4.1 Database - General■■■■■■■■■■■■■■■■■■■■■■198■■■■■■■■tiamo 2.4Reprocess…Reprocess the selected determinations (see Chapter 4.5.2.6.1, page 316).Dele
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■199■ Rename the database view■ Delete a database viewDatabase manager■ Create a new database■ Rename
4.1 Database - General■■■■■■■■■■■■■■■■■■■■■■200■■■■■■■■tiamo 2.4Automatic saveIf the corresponding option is activated in the program part Configura-t
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■201Add the selected subwindow to the view.Remove the selected subwindow from the view.Move the select
4.2 Database display■■■■■■■■■■■■■■■■■■■■■■202■■■■■■■■tiamo 2.4[Save]Save the view under the given name. The saved views are globally validand availabl
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■203Number of recordsShows the number of data sets in the database.SizeShows the size of the database
1.6 Communication■■■■■■■■■■■■■■■■■■■■■■6■■■■■■■■tiamo 2.41.6 CommunicationIntroductionThe decisive factor for the acceptance of PC-controlled analysi
4.2 Database display■■■■■■■■■■■■■■■■■■■■■■204■■■■■■■■tiamo 2.44.2.2 Select databaseProgram part: DatabaseThe number of the currently opened databases
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2054.2.4 Display databases next to one anotherMenu item: Database ▶ View ▶ Split verticallyWith the
4.3 Managing databases■■■■■■■■■■■■■■■■■■■■■■206■■■■■■■■tiamo 2.4Last backupShows the date and time of the last database backup.Next backupShows the da
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■207NOTEThe database name must be unique in the entire client/server system.Clicking on [OK] opens the
4.3 Managing databases■■■■■■■■■■■■■■■■■■■■■■208■■■■■■■■tiamo 2.4■ BackupDefinition of backup monitoring and automatic backups.■ MonitoringDefinition o
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■209Readon | off (Default value: on)Activates/deactivates the permission to open the database. The dat
4.3 Managing databases■■■■■■■■■■■■■■■■■■■■■■210■■■■■■■■tiamo 2.4automatically to the Last backup, and the Next backup field will beautomatically adjus
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■211Monitoring number of recordson | off (Default value: off)Activates/deactivates the monitoring of t
4.3 Managing databases■■■■■■■■■■■■■■■■■■■■■■212■■■■■■■■tiamo 2.4NOTEIf the backup directory is on a network drive, the backup date shouldbe added manu
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■213Entry 50 charactersDefault value New database ##[Start]Starts database restoring. After the start,
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■71.7 ConformityIntroductiontiamo also sets new standards with respect to the fulfilling of GMP,
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■214■■■■■■■■tiamo 2.4Window menusThe menu [Edit] below the list of report templates contains the followingmenu items
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2154.4.1.1.5 Export report templatesDialog window: Database ▶ Tools ▶ Report templates ▶ Manager… ▶
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■216■■■■■■■■tiamo 2.4List of report templatesThe list of report templates contains information about all the savedre
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■217■ Form reportIn the Form report the report section always includes the whole areabetween the heade
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■218■■■■■■■■tiamo 2.44.4.1.4.1.3.2 Report template - Menu FileProgram window: Database ▶ Report templateSaveSave an
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■219Last pageShows the last page of the report template (see Chapter 4.4.1.4.2.4, page224).4.4.1.4.1.3
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■220■■■■■■■■tiamo 2.4DeleteDelete the marked items (see Chapter 4.4.1.4.2.6, page 226).Select zoom level (see Chapte
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■221Fixed reportIf this option is enabled then fixed reports can be inserted in the report tem-plate (
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■222■■■■■■■■tiamo 2.44.4.1.4.2.2 Report template - Page setup Dialog window: Report template ▶ File ▶ Page setup… ▶
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■223Page marginsTopUpper page margin.Input range 0.0 - 499.0 mmDefault value 15.0 mmBottomLower page m
1.8 Versions■■■■■■■■■■■■■■■■■■■■■■8■■■■■■■■tiamo 2.41.8 VersionsIntroductiontiamo is available in three sales versions which differ with regard to th
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■224■■■■■■■■tiamo 2.44.4.1.4.2.3 Report template - Defining sectionsProgram window: Database ▶ Report templateDefin
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■225Inserting page beforeWith the menu item Insert ▶ Page before in the program windowReport template
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■226■■■■■■■■tiamo 2.4Tabular reportThe following modules can be inserted in a tabular report:■ HeaderText field, Dat
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■227Cutting, copying, pasting, deleting modulesCut the selected modules and copy them to the clipboard
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■228■■■■■■■■tiamo 2.4Jumps to first page.Jumps to previous page.Jumps to next page.Jumps to last page.Selecting dete
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2294.4.1.4.2.10 Report template - Options Dialog window: Report template ▶ Tools ▶ Options...With th
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■230■■■■■■■■tiamo 2.44.4.1.4.2.11 Report template - SaveDialog window: Report template ▶ File ▶ Save/Save as ▶ Save
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2314.4.1.4.3 Report template - Modules4.4.1.4.3.1 Report template - Text field Program window: Data
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■232■■■■■■■■tiamo 2.4Italic.Underlined.Left-justified.Centered.Right-justified.Switches line break on/off for multi-
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■233Input range 0.0000 - (max. page height) mmWidthWidth of data field.Input range 0.0000 - (max. page
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■91.9 Online helpIntroductionCalling up the helptiamo has an extensive and detailed online help t
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■234■■■■■■■■tiamo 2.4PrefixText placed in front of the data field contents.Entry 50 charactersData fieldShows path a
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■235HeightHeight of date field.Input range 0.0000 - (max. page height) mmSelection of the available Wi
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■236■■■■■■■■tiamo 2.4SampleShows the formatted date.4.4.1.4.3.4 Report template - Time field Program window: Databa
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■237Bold.Italic.Underlined.Left-justified.Centered.Right-justified.Fills the field with dots.PrefixTex
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■238■■■■■■■■tiamo 2.4PropertiesX pos.x-position within the permitted section.Input range 0.0000 - (max. page width)
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■239Right-justified.Fills the field with dots.PrefixText placed in front of the page number field.Entr
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■240■■■■■■■■tiamo 2.4HeightHeight of the field.Input range 0.0000 - (max. page height) mmSelection of the available
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■241PreviewShows the formatted number of pages.4.4.1.4.3.7 Report template - Fixed reportProgram wind
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■242■■■■■■■■tiamo 2.4Selection Calculations | Electrode test data | Calibrationdata | Curves | Messages | Measuring
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■243InsertIn order to insert group field into a report template the correspondingsymbol must be select
1.10 What is new in tiamo 2.4?■■■■■■■■■■■■■■■■■■■■■■10■■■■■■■■tiamo 2.41.10 What is new in tiamo 2.4?This chapter describes the changes that were mad
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■244■■■■■■■■tiamo 2.4Input range 0.0000 - (max. page height) mmWidthWidth of image field.Input range 0.0000 - (max.
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■245Y pos.y-position within the permitted section.Input range 0.0000 - (max. page height) mmLengthLeng
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■246■■■■■■■■tiamo 2.4Input range 0.0000 - (max. page height) mmWidthWidth of the rectangle.Input range 0.0000 - (max
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■247PropertiesNOTEThe properties are saved individually for each curve field. This meansthat it is pos
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■248■■■■■■■■tiamo 2.4Selection not defined | 50 charactersDefault value not definedAutoscalingon | off (Default valu
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■249WidthWidth of calibration curve field.Input range 0.0000 - (max. page width) mmHeightHeight of cal
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■250■■■■■■■■tiamo 2.4Functions[New]Create new template. The dialog window Properties - Control charttemplate opens i
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■251y axisResultSelection of the result column whose value is to be shown on the y axis.Selection RS01
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■252■■■■■■■■tiamo 2.44.4.2.2.3 Control chart template - Limit valuesDialog window: Database ▶ Tools ▶ Templates ▶ C
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■253Draw in mean valueon | off (Default value: on)If this check box activated, then the Mean value wil
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■11Instruments Firmware version890 Titrando 5.890.0022901 Titrando 5.901.0022902 Titrando 5.902.00
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■254■■■■■■■■tiamo 2.4Functions[New]Generates a new template. The dialog window Properties - Overlaycurves opens in w
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■255Autoscalingon | off (Default value: on)If this check box is activated, then the. In this case the
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■256■■■■■■■■tiamo 2.4End valueEnd value for scaling the x axis.Input range -1.0 E12 - 1.0 E12 Default value 1000.0 4
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■257End valueEnd value for scaling the y-axis.Input range -1.0 E12 - 1.0 E12 Default value 1000.0 4.4.
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■258■■■■■■■■tiamo 2.4BackgroundBackground colorSelection of the color for the curve background.Selection Color selec
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2594.4.4 Export templates4.4.4.1 Managing export templatesDialog window: Database ▶ Tools ▶ Templat
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■260■■■■■■■■tiamo 2.44.4.4.2 Editing export templates4.4.4.2.1 Export template - PropertiesDialog window: Database
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■261*.csv (measuring point list)Data exchange format for the measuring point list with unformattedtext
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■262■■■■■■■■tiamo 2.4Sample identificationIf this option is selected then the name of the export file will be formed
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■263Add the selected field.Remove the selected field.Change the sequence of the exported fields by mov
1.10 What is new in tiamo 2.4?■■■■■■■■■■■■■■■■■■■■■■12■■■■■■■■tiamo 2.4Method program part■ New method examples are supplied for the 864 validation. T
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■264■■■■■■■■tiamo 2.44.4.4.2.4 Export template - Options for measurement point listDialog window: Database ▶ Tools
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2654.4.4.3 XML exportXML exportGeneralAn XML export file with all determination data can be created
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■266■■■■■■■■tiamo 2.4<userNameFull val="" /> User name (full name)<clientName val="" /&
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■267<determinationDuration val=""/> Duration of the determination from its start to it
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■268■■■■■■■■tiamo 2.4<version val=""/> Version of the determination.<status val="original&qu
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■269</runMessages> – <DetermVars dynamic=""> Determination variables– <data&
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■270■■■■■■■■tiamo 2.4– <userName>...</userName> Short name of the user who has signed the determina-tion
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■271<status val="original"/> Method status:originalDetermination method unaltered.modi
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■272■■■■■■■■tiamo 2.44.4.4.3.3 XML export - Sample dataXML export– <Sample> Sample data– <Smpl.Data> Sa
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■273<InputSource val=""/> Data source for the sample size:manual = manual data input.&
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■13Workplace program part■ If a method was programmed in which a check at the time of the startwas
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■274■■■■■■■■tiamo 2.4<vs val=""/> Result status:OK = The value is ok and has not been monitored.OKL
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■275</data> <sme> – <abs> Absolute standard deviation of the result.– <data>
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■276■■■■■■■■tiamo 2.4<vs val=""/> Result status:OK = The value is ok and has not been monitored.OKL
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■277<abs> – <rel> Relative standard deviation of the result.– <data> <vr val=&q
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■278■■■■■■■■tiamo 2.4</data> </CommandVars> – <Device> Device data– <deviceType> Device ty
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■279– <dosType> ... </dosType> Dosing device type.– <dosSerial> ... </dosSerial&g
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■280■■■■■■■■tiamo 2.4– <remotePortName> ... </remo-tePortName>Number of the MSB connector the Remote Box
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■281<sensorE0 val="" /> Electrode zero point of the sensor.<sensorC val=""
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■282■■■■■■■■tiamo 2.4<CalDur val="" /> Column header for duration of measurement.<header> – &
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■283<crCalibOptDataCalibRangeToval="" />Maximum concentration of the calibration range
Metrohm AGCH-9100 HerisauSwitzerlandPhone +41 71 353 85 85Fax +41 71 353 89 [email protected] 2.4Manual8.101.8061EN09.2013 ek/doe
1.10 What is new in tiamo 2.4?■■■■■■■■■■■■■■■■■■■■■■14■■■■■■■■tiamo 2.4■ The DBL command variable, which indicates the total time for process-ing the
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■284■■■■■■■■tiamo 2.4<ion val="" /> Ion (Valency).<conc val="" /> Calculated concent
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■285<vr val="" /> <vf val="" /> </td> </tableBody> <
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■286■■■■■■■■tiamo 2.4<limit> ... </limit> Limit value type.<limitVal> ... </limitVal> Limit
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■287<vt val="" /> Variable type:TX = TextNR = NumberDT = Date/TimeNA = Unknown<vn v
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■288■■■■■■■■tiamo 2.4<un val="" /> Unit of the variable.<am val="" /> Assignment met
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■289– <detectorType> ... </detector-Type>Detector type of spectrometer.– <dateRecDarkRe
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■290■■■■■■■■tiamo 2.4– <exchDosUnit> Data on exchange/dosing unit.– <exdosTitle> ... </exdosTitle>
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■291– <remoteType> ... </remote-Type>Type of Remote Box.– <multiPortValvePortName> .
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■292■■■■■■■■tiamo 2.4<sensorName val="" /> Sensor name.<sensorType val="" /> Sensor
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■293– <tcAssignMethod> ... </tcAs-signMethod>Assignment method for sample solution (TC con
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■15■ If report templates with modified curve properties with regard to thedefault templates suppli
4.4 Templates■■■■■■■■■■■■■■■■■■■■■■294■■■■■■■■tiamo 2.4– <eltDoubleBufferResult2> ... </eltDoubleBufferResult2>Results for buffer pH 4/7.–
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■295– <MethodParams dynamic=""> Method parameters– <Command> Data on command.<
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■296■■■■■■■■tiamo 2.4</data> – <min> ... </min> ... Minimum value of the result.– &l
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■297■ Navigation bar4.5.1.2 Determination overview - Table Subwindow: Database ▶ Determination overvi
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■298■■■■■■■■tiamo 2.4In the determination table it is not possible to show more than 200 deter-mination
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■2994.5.1.4 Determination overview - Filter selection Subwindow: Database ▶ Determination overviewFil
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■300■■■■■■■■tiamo 2.4Jump to the first set of determinations in the table.Jump back to the previous set
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■301[Alt] [Home]Jumps to first determination (of all).[Alt] [ ↑ ]Jumps to first data set of previous s
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■302■■■■■■■■tiamo 2.44.5.1.8 Determination overview - FunctionsSubwindow: Database ▶ Determination ove
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■303NOTEThe determination table is updated automatically when the database isopened and when a change
1.10 What is new in tiamo 2.4?■■■■■■■■■■■■■■■■■■■■■■16■■■■■■■■tiamo 2.4■ If the method parameter report of a method containing the releasecommands RLS
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■304■■■■■■■■tiamo 2.4Search optionsTypeSelection of the format type for the fields for which several ty
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■305for fields of the type = TextEntry 256 charactersDefinition of a text expression as search word. T
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■306■■■■■■■■tiamo 2.4UpwardIt is being searched to the beginning of the databse.Match caseon | off (Def
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■307By double-clicking with the left mouse button set the content of theselected field as filter crite
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■308■■■■■■■■tiamo 2.4If the contents of a field is larger than the column width then the wholecontents
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■309Filter nameName under which the special filter is to be saved.Entry 50 characters[Save]Saves filte
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■310■■■■■■■■tiamo 2.4DetailsDepending on the data field, further selection fields are created underDeta
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■311Only for fields of the type = textEntry 256 charactersDefinition of a text expression as compariso
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■312■■■■■■■■tiamo 2.4■ Multiple signingMethods and determinations can be signed several times at each l
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■313InfoDisplay of information for signing and deleting signatures. The followingmessages are possible
■■■■■■■■■■■■■■■■■■■■■■1 Introductiontiamo 2.4■■■■■■■■17■ If a pH calibration or an electrode test was carried out with an intelli-gent sensor on one s
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■314■■■■■■■■tiamo 2.44.5.2.5.3 Signature Level 2Dialog window: Database ▶ Determinations ▶ Sign ▶ Sign
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■315Selection 'Selection from the default reasons'CommentEntry of a comment on the signature
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■316■■■■■■■■tiamo 2.44.5.2.5.5 Delete signatures level 2Dialog window: Database ▶ Determinations ▶ Sig
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■317and the results recalculated. The reprocessed determination can then besaved in the database as a
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■318■■■■■■■■tiamo 2.4During recalculation, a progress bar is shown; recalculation can be abor-ted click
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■319■ Statistically linked determinationsIf determinations are selected for reprocessing that are stat
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■320■■■■■■■■tiamo 2.4■ Waiting and timeout periodsAll waiting and timeout periods of commands are set t
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■321■ StatisticsModification of statistics data.The tab Statistics will only be shown when the last de
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■322■■■■■■■■tiamo 2.44.5.2.6.4.3 Modifications - MethodTabs: Database ▶ Determination overview ▶ Deter
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■323Results with statisticsResult nameSelection of the statistically evaluated result by using the res
2.1 Program parts■■■■■■■■■■■■■■■■■■■■■■18■■■■■■■■tiamo 2.42 General program functions2.1 Program parts2.1.1 Program partsAllgemeine Programmfunktio
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■324■■■■■■■■tiamo 2.4NOTEIf the results of a determination are switched off, the statistics for thesere
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■325[Edit]The dialog window Curve evaluation opens for manually reprocessingthe curve evaluation.4.5.2
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■326■■■■■■■■tiamo 2.4Set EP with parallel tangentsBy moving the mouse a point on the curve is selected
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■327Define properties for the graph displayThe dialog window Properties - Curves # is opened for graph
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■328■■■■■■■■tiamo 2.4FP#Endpoint that has been determined by automatic fixed point evalua-tion.VolumeVo
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■329■ OptionsOptions for graphical display of curves.4.5.2.6.4.6.4.2 Properties curve evaluation - x
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■330■■■■■■■■tiamo 2.4Only editable when the option Autoscaling is disabled.Input range -1.0E12 - 1.0E12
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■331End valueEnd value for scaling the y-axis.Only editable when the option Autoscaling is disabled.In
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■332■■■■■■■■tiamo 2.4Input range 0.01 - 1000 Default value 0.01 Smoothing factor y-axisFactor for smoot
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■333CurveCurve colorSelection of the color for the curve line.Selection 13 colors | redDefault value r
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■19Program part manual■ Manual control of devicesNOTEAccess to the individual program
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■334■■■■■■■■tiamo 2.4Input range 0.01 - 1000 Default value 0.01 4.5.2.6.4.6.4.5 Properties curve evalu
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■335Show endpointsShow endpointson | off (Default value: on)If this check box is activated then the en
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■336■■■■■■■■tiamo 2.44.5.2.6.5.1 Result view - Results overviewTab: Database ▶ Determinations ▶ Reproc
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■3374.5.2.6.5.2 Result view - Raw dataTab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■338■■■■■■■■tiamo 2.44.5.2.7 Sending determinations toDialog window: Database ▶ Determinations ▶ Send
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■339All filtered data recordsAll those determinations from the whole determination table areexported t
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■340■■■■■■■■tiamo 2.4NOTEIf the check box Comment on modification of determinations inthe Security sett
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■3414.5.2.12 Determinations - Print reportDialog window: Database ▶ File ▶ Print ▶ Report... ▶ Report
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■342■■■■■■■■tiamo 2.4PDF fileon | off (Default value: off)If this check box is activated the reports ar
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■3434.5.2.14 Determinations - Displaying historyMenu item: Database ▶ Determinations ▶ Show historySw
2.1 Program parts■■■■■■■■■■■■■■■■■■■■■■20■■■■■■■■tiamo 2.4shown in color. The upper left corner of the symbol contains a black fielddisplaying the num
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■344■■■■■■■■tiamo 2.4lated from these measured values. Listed below are the individual mea-sured values
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■345NOTECalibration curves cannot be printed out directly from the dialog win-dow Calibration curve/Ca
4.5 Determination overview■■■■■■■■■■■■■■■■■■■■■■346■■■■■■■■tiamo 2.44.5.2.18 Determinations - Overlay curvesMenu item: Database ▶ Determinations ▶ Ov
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■347[Print (PDF)]Open the dialog window Print curves (PDF) (see Chapter 4.5.2.19, page347). The conten
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■348■■■■■■■■tiamo 2.4CommentPossibility of entering comments on the control chart which will be pro-duce
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■349Determination ID:Unambiguous and unmistakable identification for the determination.Server name:Com
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■350■■■■■■■■tiamo 2.4User (short name):Short name of the user.NOTEWhich user is entered depends on the o
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■351modifiedDetermination data modified.Determination version:Version of the determination. The unalte
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■352■■■■■■■■tiamo 2.4Signature reason:Reason for signature selected by the user.Signature comment:User c
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■353Method saving date:Date and time when the modified method version was saved.Method saved by (short
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■21ElementsThe desktop of the program part Configuration comprises the followingeleme
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■354■■■■■■■■tiamo 2.4Sample size:Value of the sample size.Sample size unit:Unit of the sample size.Input
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■355Modification reason sample data:Reason for the sample data modification.Modification comment sampl
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■356■■■■■■■■tiamo 2.4Measuring input:Number of the measuring input (+ designation iConnect for intellige
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■357Date titer det.:Date of the titer determination.Titer method:Method with which the titer has been
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■358■■■■■■■■tiamo 2.4User dark/reference spectrum:User logged in during recording the dark spectrum and
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■359Measuring input:Number of the measuring input to which the sensor is connected (+ desig-nation iCo
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■360■■■■■■■■tiamo 2.4Assignment date:Date and time of last value assignment.Assignment method:Method wit
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■361c3Coefficient third-order of the Chebyshev polynomial.c4Coefficient fourth-order of the Chebyshev
4.6 Subwindow Information■■■■■■■■■■■■■■■■■■■■■■362■■■■■■■■tiamo 2.4Coefficient of determinationCoefficient of determination (R2), calculated using the
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■3634.6.6 Information - MessagesTab: Database ▶ Information ▶ MessagesDisplay of messages generated d
2.2 Login/password protection■■■■■■■■■■■■■■■■■■■■■■22■■■■■■■■tiamo 2.4tings according to 21 CFR Part 11. The following conditions will thenbe complied
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■364■■■■■■■■tiamo 2.44.7 Subwindow Results4.7.1 Results - GeneralSubwindow: Database ▶ ResultsIn the subwi
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■365NOTEOnly the last results having been calculated will be shown. For example,if there are several c
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■366■■■■■■■■tiamo 2.44.7.3 Results - Raw dataTab: Database ▶ Results ▶ ResultsOn the tab Raw data the evalu
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■367Column 2: Varia-bleColumn 3 Column 4 Column 5 Column 6BP# BP#.VOL, mL, 4 BP#.MEA, mV, 1 BP#.TIM, s
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■368■■■■■■■■tiamo 2.4Table 6 Command MET UColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EP# EP#.VOL,
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■369Table 9 Command MET CondColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EP# EP#.VOL, mL, 4 E
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■370■■■■■■■■tiamo 2.4Column 2: Varia-bleColumn 3 Column 4 Column 5 Column 6DTI DTI, s, 1 FP# FP#.VOL, m
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■371Table 16 Command KFCColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EP EP.MEA, mV, 1 EP.QTY,
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■372■■■■■■■■tiamo 2.4Table 20 Command TETColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EP EP.VOL, mL
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■373Table 24 Command MEAS UpolColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EME EME, µA, 1
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■23[Change password]Opens the window Change password, in which the new password hasto
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■374■■■■■■■■tiamo 2.4Table 28 Command MEAS CondColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EME EME
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■375Table 33 Command MEAS OptColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6EME EME, mAU, 1
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■376■■■■■■■■tiamo 2.4Table 38 Command CAL SpecColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6CP# CP#.
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■377Table 43 Command DOS UColumn 2: Varia-bleColumn 3 Column 4 Column 5 Column 6MR MR.MRT, mL/min,4MR.
4.7 Subwindow Results■■■■■■■■■■■■■■■■■■■■■■378■■■■■■■■tiamo 2.4s(abs):Shows the absolute standard deviation for statistically evaluated results.s(rel)
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■379Statisticson | off (Default value: off)Shows the statistics results.Display for calculation comman
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■380■■■■■■■■tiamo 2.4TabsIn the curve window a tab with the corresponding command name andthe run index (e.g.
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■381¯Dos.r.Upper limit value for dosing rate monitoring infringed._Temp.Lower limit value for temperat
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■382■■■■■■■■tiamo 2.4Meas.v. [pH]/Meas.v. [U]Measured value at limit violation time.Volume [mL]Dosed volume a
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■383■ OptionsOptions for the graphical display of curves.■ Measuring point listParameters for the disp
TeachwareMetrohm AGCH-9100 [email protected] documentation is protected by copyright. All rights reserved.Although all the information
2.3 Electronic signatures■■■■■■■■■■■■■■■■■■■■■■24■■■■■■■■tiamo 2.4NOTEThe password always has to be changed before the Passwords expireevery of the pa
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■384■■■■■■■■tiamo 2.4For MET commandsSelection Volume [mL] | Measured value | dMW | Time[s] | Temperature [°C
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■385For MEAS Ref commandsSelection Wavelength [nm] | Intensity [Counts] | Inten-sity Dark [Counts] | T
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■386■■■■■■■■tiamo 2.4End valueEnd value for scaling the x axis.Only editable when autoscaling is deactivated.
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■387For MET commandsSelection Volume [mL] | Measured value | dMW | Time[s] | Temperature [°C] | Calcul
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■388■■■■■■■■tiamo 2.4For MEAS Ref commandsSelection Wavelength [nm] | Intensity [Counts] | Inten-sity Dark [C
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■389End valueEnd value for scaling the y1 axis.Only editable when autoscaling is deactivated.Input ran
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■390■■■■■■■■tiamo 2.4Input range 0.01 - 1000 Default value 0.01 Smoothing factor y-axisFactor for smoothing o
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■391For DET commandsSelection Volume [mL] | Measured value | ERC | Time [s] | Temperature [°C] | Calcu
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■392■■■■■■■■tiamo 2.4For MEAS TC Cond commandsSelection Temperature [°C] | Measured value | Time [s] | dMW/dt
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■393CurveCurve colorSelection of a color for the line of the curve.Selection 13 colors | pinkDefault v
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■25■ Signing at Level 2Level 2 can only be signed if signatures already exist at Leve
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■394■■■■■■■■tiamo 2.4Smoothing factor y-axisFactor for smoothing on the y axis.Input range 0.01 - 1000 Defaul
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■395Selection Line types | dottedDefault value dottedGrid colorSelection of the color for the grid lin
4.8 Subwindow Curves■■■■■■■■■■■■■■■■■■■■■■396■■■■■■■■tiamo 2.4Selection 13 colors | light greenDefault value light greenAuxiliary linesSelection of a
■■■■■■■■■■■■■■■■■■■■■■4 Databasetiamo 2.4■■■■■■■■397Adds the selected column to the measuring point list.Removes the selected column from the measurin
5.1 Method - General■■■■■■■■■■■■■■■■■■■■■■398■■■■■■■■tiamo 2.45 Method5.1 Method - General5.1.1 Method - DefinitionProgram part: MethodDefinitionIn
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■399against further modifications. Methods are stored in the configurationdatabase and globally accessib
5.1 Method - General■■■■■■■■■■■■■■■■■■■■■■400■■■■■■■■tiamo 2.45.1.3.2 Method - Menu FileProgram part: MethodNew… Create a new method (see Chapter 5.2
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■401InsertInsert the content of the clipboard (commands, tracks) above the selected com-mand or on the r
5.1 Method - General■■■■■■■■■■■■■■■■■■■■■■402■■■■■■■■tiamo 2.4SaveSave the selected method (see Chapter 5.2.6, page 413).CloseClose the selected metho
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■403Split horizontally Split method window horizontally and display two methods below each other(see Cha
2.3 Electronic signatures■■■■■■■■■■■■■■■■■■■■■■26■■■■■■■■tiamo 2.4ModifyModifyNot signedSign (1)Signed 1Sign (2)Signed 2Delete signatures 2DeleteCreat
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■404■■■■■■■■tiamo 2.45.2 Method editor5.2.1 Creating a new methodMenu item: Method ▶ File ▶ New…The icon or
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■405NameName of the method.SavedDate and time when the method was saved.UserShort name of the user who s
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■406■■■■■■■■tiamo 2.4bar of the program; the number of currently opened methods is displayedin the left upper co
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4075.2.3.1 Display single methodMenu item: Method ▶ View ▶ UnsplitIn the default settings, the most re
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■408■■■■■■■■tiamo 2.4Selection Fit to windowAdjust to both height and width of the window.5.2.4 Editing a metho
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4095.2.4.1.3 Move trackProgram part: Method ▶ Method windowMove track with Drag&DropTo move a trac
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■410■■■■■■■■tiamo 2.45.2.4.1.5 Cut trackMenu item: Method ▶ Edit ▶ CutThe selected track is moved to the clipbo
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■411The new command is inserted above the selected command after confirm-ing the selection with [OK].5.2
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■412■■■■■■■■tiamo 2.45.2.4.2.5 Cutting a commandMenu item: Method ▶ Edit ▶ CutThe selected commands are moved t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■413Command without comment Command with comment5.2.5 Checking a methodMenu item: Method ▶ File ▶ Metho
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■27Signature 1 not possible (signature 2 exists)The selected method or determination
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■414■■■■■■■■tiamo 2.4according to the selected column (columns Name, Saved, User, Fullname, Version, Signed, Met
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■415NOTEThe method name must be unique in the entire client/server system.[Save]Save the focused method
5.2 Method editor■■■■■■■■■■■■■■■■■■■■■■416■■■■■■■■tiamo 2.4Entry 1,000 characters5.2.8 Print method reportMenu item: Method ▶ File ▶ Print (PDF)…With
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4175.3 Managing methods5.3.1 Managing methodsDialog window Method ▶ File ▶ Method manager… ▶ Method m
5.3 Managing methods■■■■■■■■■■■■■■■■■■■■■■418■■■■■■■■tiamo 2.4SignedDisplay indicating whether and at which level the method has beensigned.Selection
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■419Signature 2…Sign the selected method on level 2 (see Chapter 2.3.4, page 27).Show signatures…Show al
5.3 Managing methods■■■■■■■■■■■■■■■■■■■■■■420■■■■■■■■tiamo 2.4Method groupSelection of the method group to which the selected methods should bemoved.S
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4215.3.7 Exporting a methodMenu item: Method ▶ File ▶ Method manager… ▶ Method man-ager ▶ [Edit] ▶ Exp
5.3 Managing methods■■■■■■■■■■■■■■■■■■■■■■422■■■■■■■■tiamo 2.4NOTEThe method name must be unique in the entire Client/Server system.Locked methods can
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4235.3.10.2 Signature Level 1Dialog window: Database ▶ Determinations ▶ Sign ▶ Signature 1... ▶ Signat
2.3 Electronic signatures■■■■■■■■■■■■■■■■■■■■■■28■■■■■■■■tiamo 2.4NOTEMethods or determinations signed at level 2 are locked, i.e. they canneither be
5.3 Managing methods■■■■■■■■■■■■■■■■■■■■■■424■■■■■■■■tiamo 2.4Selection 'Selection from the default reasons'CommentEntry of a comment on the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■425Signature not possible (accessed by other client)The selected method or determination cannot be sign
5.3 Managing methods■■■■■■■■■■■■■■■■■■■■■■426■■■■■■■■tiamo 2.4UserShort name of the user who signed the method.Full nameFull name of the user who sign
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■427NOTESignatures 2 can only be deleted if the user belongs to a user groupwith the corresponding autho
5.4 Method groups■■■■■■■■■■■■■■■■■■■■■■428■■■■■■■■tiamo 2.45.4 Method groups5.4.1 Manage method groups Dialog window: Method ▶ File ▶ Method groups…
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4295.4.2 Edit method groups5.4.2.1 Method groups - PropertiesDialog window: Method ▶ File ▶ Method gr
5.5 Tracks■■■■■■■■■■■■■■■■■■■■■■430■■■■■■■■tiamo 2.4User groupNames of the user groupsExecuteon | off (Default value: on)Authorization to start method
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■431PresentationThe individual tracks are arranged side by side in the method window. Thetrack name is d
5.5 Tracks■■■■■■■■■■■■■■■■■■■■■■432■■■■■■■■tiamo 2.45.5.2.2 Normal trackSubwindow: MethodA normal track is a track that can be created manually by th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■433■ Parallel running normal trackIf the check box Return immediately in the (see Chapter 5.6.2.3,page
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■29NOTEMethods or determinations can only be signed at level 2 if the userbelongs to
5.5 Tracks■■■■■■■■■■■■■■■■■■■■■■434■■■■■■■■tiamo 2.45.5.2.4 Series end trackSubwindow: MethodA series end track is a track that can be created manual
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4355.5.2.5 Exit trackSubwindow: MethodAn exit track is a track that can be created manually with Paste
5.5 Tracks■■■■■■■■■■■■■■■■■■■■■■436■■■■■■■■tiamo 2.4The error track is executed if the determination is stopped due to an error.In this case the error
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4375.6 Commands5.6.1 Commands - General5.6.1.1 Definition and PresentationSubwindow: MethodDefinitio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■438■■■■■■■■tiamo 2.4■ GreenTitration and measurement commands■ YellowSample Processor and dosing commands■ BlueAll o
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■439■ CAL SpecExecution of a wavelength calibration.■ CALCCalculation of intermediate and end results, t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■440■■■■■■■■tiamo 2.4■ LQHExtensive dosing possibilities with a Dosino.■ MEASMeasuring.■ METMonotonic Equivalence Poi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■441■ STDADD dosStandard addition with addition of the standard addition solution froma dosing device.■
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■442■■■■■■■■tiamo 2.45.6.2.2 START5.6.2.2.1 START - OverviewDialog window: Method ▶ START ▶ Properties.. ▶ START &a
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■443Identification DescriptionIn the following lines you will find the method variables (sample data)pre
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■30■■■■■■■■tiamo 2.42.4 Formula editorDialog window: Formula editorThe formula editor serves as a support when
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■444■■■■■■■■tiamo 2.4NOTEThe selected workplace view will only be opened when starting a singledetermination or start
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■445ConditioningAutomatic conditioningon | off (Default value: on)If this option is enabled, the conditi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■446■■■■■■■■tiamo 2.4Name, Type, Assignment or Value) the table can be sorted accordingto the selected column in eith
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■447NOTEThe name of the assigned method variables is displayed automaticallyfor the sample data variable
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■448■■■■■■■■tiamo 2.4Variable monitoringNOTEIs displayed only for method variables of the types Number or Date/Time.o
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■449Display messageon | off (Default value: on)If this option is enabled, all active tracks are stopped
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■450■■■■■■■■tiamo 2.4Stop determinationIf this option is selected, then the current determination (or condition-ing)
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■451Entry 200 charactersPasswordPassword for the access to the mail server. This password does not neces
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■452■■■■■■■■tiamo 2.4Return immediatelyon | off (Default value: off)If this option is enabled, then the program does
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■453Live displayon | off (Default value: on)If this option is enabled, then the track will be shown in t
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■31Entry using the buttonsMathematical operators and parentheses or brackets can simp
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■454■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated in the method run by thecommand S
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■455Identifi-cationDescription.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (variable
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■456■■■■■■■■tiamo 2.45.6.2.8 ENDDialog window: Method ▶ END ▶ END -'Command name'End command for all track
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4575.6.3.2 DET5.6.3.2.1 DET - OverviewMenu item: Method ▶ Insert ▶ New command...Command for Dynamic
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■458■■■■■■■■tiamo 2.4The figure shows that the evaluation still requires measured values fromthe measuring point list
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4595.6.3.2.2 DET pH5.6.3.2.2.1 DET pH - OverviewDialog window: Method ▶ DET pH ▶ Properties... ▶ DET
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■460■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated by the DET pH com-mand in the met
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■461Identification Description.ETE End temperature (temperature after the commandhas been processed) in
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■462■■■■■■■■tiamo 2.4Identification Description.LP.MEA Measured value for the last measuring point in themeasuring po
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■463Identification Description.SVM Start volume measured value (volume that was addedaccording to the st
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■32■■■■■■■■tiamo 2.4StatisticsThe mean value as well as the absolute and relative standard deviation ofresults
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■464■■■■■■■■tiamo 2.4Dosing deviceDosing deviceSelection of the number of the dosing device (dosing or exchange unit)
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■465855, 888Selection 1Default value 1TitrinoSelection 1 | 2 | diff.Default value 1SensorSelection of a
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■466■■■■■■■■tiamo 2.4Stirring rateSetting the stirring rate. The algebraic sign of the stirring rate changes thedirec
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■467Input range 0.1 - 999.0 mV/minSelection offDefault value offoffThe measured vales will not be applie
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■468■■■■■■■■tiamo 2.4TitrinoInput range 0.01 - 150.00 mL/minSelection maximumDefault value maximumStart measured valu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■469Dosing rateSpeed at which the start volume is added until the start slope is reached.The maximum dos
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■470■■■■■■■■tiamo 2.4fastFor less critical rapid titrations.UserEditing the individual titration parameters which aff
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■471Max. waiting timeIf signal drift has been switched off or has not yet been reached, then themeasured
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■472■■■■■■■■tiamo 2.4Max. incrementA maximum volume increment should be selected when the titrant con-sumption up to
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■4735.6.3.2.2.5 DET pH - Stop conditionsTab: Method ▶ DET pH ▶ Properties... ▶ Stop conditionsCommand n
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■33The number of significant digits has now been reduced by three to fourdigits by om
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■474■■■■■■■■tiamo 2.4Volume after EPWhen the number of equivalence points defined under Stop EP has beenfound, this v
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■475Potentiometric evaluationSelection Evaluation without window | Evaluation withmeasured value window
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■476■■■■■■■■tiamo 2.4allAll equivalence points will be recognized.greatestOnly the equivalence point with the greates
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■477[Properties]Opens the dialog window in which the parameters for the selected win-dow can be edited (
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■478■■■■■■■■tiamo 2.4pK/HNP evaluationpK/HNP evaluationon | off (Default value: off)If this option is enabled, then t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■479Break-point evaluationon | off (Default value: off)A break-point evaluation is used to determine sha
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■480■■■■■■■■tiamo 2.4Window = TimeInput range 0 - 999999 sDefault value 0 sUpper limitValue for the upper limit of th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■481Lower limit pHValue for the lower limit of the Gran evaluation range.Input range -20.000 - 20.000 De
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■482■■■■■■■■tiamo 2.4Additional external measured valuesAdditional external measured valueson | off (Default value: o
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■483Titrando, 855Input range 0 - 200 Default value 5 EP recognitionFilter for the recognition of equival
■■■■■■■■■■■■■■■■■■■■■■Table of contentstiamo 2.4■■■■■■■■IIITable of contents1 Introduction 11.1 Welcome to tiamo ...
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■34■■■■■■■■tiamo 2.4Name Syntax DescriptionSystemvariables'SV.Variableidentification'System variables
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■484■■■■■■■■tiamo 2.4Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 9999.99 mLEP criterionCriterion for t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■485Fixed valueValue of the fixed endpoint.Measured valueInput range -20.000 - 20.000 pHTimeInput range
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■486■■■■■■■■tiamo 2.4■ Stop conditionsDefinition of conditions which cause the titration to stop.■ Potentiometric eva
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■487Identification Description.EP{x}.ERC ERC for the endpoint × (1 - 9).EP{x}.MEA Measured value for the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■488■■■■■■■■tiamo 2.4Identification Description.IME Initial measured value (measured value before startconditions are
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■489Identification Description.SLO Electrode slope of the sensor used for the command(in mV for ISE sens
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■490■■■■■■■■tiamo 2.4not definedIn this case, the device name must be assigned by the user at the startof the method.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■491Entry 24 charactersSelection 'Solution name' | not definedDefault value not definednot def
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■492■■■■■■■■tiamo 2.4offThe temperature will not be measured. The temperature entered man-ually under Temperature on
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■493Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■35Method variablesVariable name Description Data type.VAL Value of the method variab
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■494■■■■■■■■tiamo 2.4Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 0.00000 mLTitrinoInput range 0.00 - 9
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■495Selection maximumStart slopeNOTEOnly displayed for Titrando and 855.Start slopeWhen the start slope
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■496■■■■■■■■tiamo 2.4Titration rateTitration rateThe three predefined sets of parameters can be selected for the titr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■497TitrinoInput range 0.5 - 999.0 mV/minDefault value 20.0 (slow), 50.0 (optimal), 80.0 (fast) mV/minSe
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■498■■■■■■■■tiamo 2.4Measuring point densityA small value means small volume increments, i.e. a high measuring pointd
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■499Selection maximumDefault value maximumTemperatureTemperatureManually entered titration temperature.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■500■■■■■■■■tiamo 2.4Stop measured valueStops when the preset value for a measuring point has been exceeded ornot ach
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■501Titrando, 855Input range 0.01 - 166.00 mL/minSelection maximumDefault value maximumTitrinoInput rang
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■502■■■■■■■■tiamo 2.4Evaluation without windowEP criterionCriterion for the recognition of equivalence points. Equiva
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■503TitrinoInput range 0 - 200 Default value 5 [New]Opens the Measured value window # dialog window, in
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■36■■■■■■■■tiamo 2.4syntax from the sample data variables of the current sample data line bymeans of the word N
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■504■■■■■■■■tiamo 2.4Fixed endpoint evaluationFixed endpoint evaluationon | off (Default value: off)If this check box
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■505Threshold valueThe evaluation of the minimum begins as soon as the slope of the curveexceeds the set
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■506■■■■■■■■tiamo 2.4SlopeMinimum difference between the slope before and after the break-point.The smaller the diffe
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■507Window = TimeInput range 0 - 999999 sDefault value 999999 sGran evaluationNOTEThis evaluation method
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■508■■■■■■■■tiamo 2.4Additional calculated measured valuesAdditional calculated measured valueson | off (Default valu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■5095.6.3.2.3.9 DET U - Measured value windowDialog window: Method ▶ DET U ▶ Properties... ▶ Potentiome
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■510■■■■■■■■tiamo 2.4Titrando, 855Selection first | greatest | last | ascending | descendingDefault value firstfirstO
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■511EP criterionCriterion for the recognition of equivalence points. Equivalence pointswhose ERC is smal
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■512■■■■■■■■tiamo 2.4TimeInput range 0.0 - 999999.9 sVolumeInput range 0.00000 - 9999.99 mL5.6.3.2.4 DET Ipol5.6.3.2
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■513■ Additional evaluationsDefinition of additional methods for the evaluation of the titrationcurves.■
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■37NOTEFor method variables of the next sample data line, the following rulesapply:■
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■514■■■■■■■■tiamo 2.4Identification Description.EP{x}.TEM Temperature for the endpoint × (1 - 9) in °C.EP{x}.TIM Time
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■515Identification Description.LP.ERC ERC for the last measuring point in the measuringpoint list.LP.EXx
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■516■■■■■■■■tiamo 2.4Identification Description.SVA Start volume absolute (volume that was addedaccording to the star
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■517Selection Device types | TitrandoDefault value TitrandoDosing deviceDosing deviceSelection of the nu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■518■■■■■■■■tiamo 2.4Titrando (without 888)Selection 1 | 2Default value 1855, 888Selection 1Default value 1SensorSele
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■519automaticIf a temperature sensor is connected then the temperature will bemeasured continuously. Oth
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■520■■■■■■■■tiamo 2.45.6.3.2.4.3 DET Ipol - Start conditionsTab: Method ▶ DET Ipol ▶ Properties... ▶ Start condition
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■521Input range 0 - 999999 sDefault value 1 sStart volumeStart volumeVolume to be added before the start
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■522■■■■■■■■tiamo 2.4Selection offDefault value offDosing rateSpeed at which the start volume is added until the star
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■5235.6.3.2.4.4 DET Ipol - Titration parametersTab: Method ▶ DET Ipol ▶ Properties... ▶ Titration param
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■38■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.BLV Blank value for the sensor usedfor the command (onl
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■524■■■■■■■■tiamo 2.4Titrando, 855Input range 0.1 - 999.0 mV/minDefault value 20.0 (slow), 50.0 (optimal), 80.0 (fast
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■525Dosing of incrementsNOTEThe following parameters will be displayed only if the user option isselecte
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■526■■■■■■■■tiamo 2.4Titrando, 855Input range 0.01 - 166.00 mL/minSelection maximumDefault value maximumTitrinoInput
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■527Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 100,000 mLSelection offTitrinoInput range
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■528■■■■■■■■tiamo 2.4Titrando, 855Input range 0 - 999999 sSelection offDefault value offFilling rateSpeed with which
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■529Evaluation with measured value window (Upol)With this option set, up to 9 regions (windows) can be d
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■530■■■■■■■■tiamo 2.4descendingOnly equivalence points with a negative slope of the titration curve willbe recognized
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■5315.6.3.2.4.7 DET Ipol - Additional evaluationsTab: Method ▶ DET Ipol ▶ Properties... ▶ Additional ev
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■532■■■■■■■■tiamo 2.4Threshold valueThe evaluation of the minimum begins as soon as the slope of the curveexceeds the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■533SlopeMinimum difference between the slope before and after the break-point.The smaller the differenc
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■39Identifica-tionDescription Commands.CAL Status of the calibration: 1 = cali-brated
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■534■■■■■■■■tiamo 2.4Window = TimeInput range 0 - 999999 sDefault value 999999 sGran evaluationNOTEThis evaluation me
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■535Additional calculated measured valuesAdditional calculated measured valueson | off (Default value: o
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■536■■■■■■■■tiamo 2.45.6.3.2.4.9 DET Ipol - Measured value windowDialog window: Method ▶ DET Ipol ▶ Properties... ▶
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■537Titrando, 855Selection first | greatest | last | ascending | descendingDefault value firstfirstOnly
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■538■■■■■■■■tiamo 2.4EP criterionCriterion for the recognition of endpoints. Endpoints whose discoveredERC value is s
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■539Measured valueInput range -2000.0 - 2000.0 mVTimeInput range 0.0 - 999999.9 sVolumeInput range 0.000
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■540■■■■■■■■tiamo 2.4■ Potentiometric evaluationParameters for the potentiometric evaluation of titration curves.■ Ad
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■541.EP{x}.MEP Number of endpoints in the window × (1 - 9); 1 = 1endpoint, 2 = 2 or more endpoints, 3 =
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■542■■■■■■■■tiamo 2.4.LP.CAx Calculated value × (1 - 3) for the last measuring pointin the measuring point list.LP.ER
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■543.SVA Start volume absolute (volume that was addedaccording to the start condition "start volume
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■40■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.DBL Total duration for the processingof the command in
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■544■■■■■■■■tiamo 2.4Dosing deviceDosing deviceSelection of the number of the dosing device (dosing or exchange unit)
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■545855, 888Selection 1Default value 1SensorSelection of a sensor of type Metal electrode from the senso
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■546■■■■■■■■tiamo 2.4offThe temperature will not be measured. The temperature entered man-ually under Temperature on
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■547Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■548■■■■■■■■tiamo 2.4Input range 0 - 999999 sDefault value 1 sStart volumeStart volumeVolume to be added before the s
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■549Selection offDefault value offDosing rateSpeed at which the start volume is added until the start sl
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■550■■■■■■■■tiamo 2.45.6.3.2.5.4 DET Upol - Titration parametersTab: Method ▶ DET Upol ▶ Properties... ▶ Titration p
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■551Titrando, 855Input range 0.01 - 99.90 µA/minDefault value 20.00 (slow), 50.00 (optimal), 80.00 (fast
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■552■■■■■■■■tiamo 2.4Dosing of incrementsNOTEThe following parameters will be displayed only if the user option issel
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■553Titrando, 855Input range 0.01 - 166.00 mL/minSelection maximumDefault value maximumTitrinoInput rang
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■41Identifica-tionDescription Commands.EP{x}.DME Measured value differential forthe e
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■554■■■■■■■■tiamo 2.4Selection offTitrinoInput range 0.000 - 9999.99 mLDefault value 100.00 mLSelection offStop measu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■555Titrando, 855Input range 0.01 - 166.00 mL/minSelection maximumDefault value maximumTitrinoInput rang
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■556■■■■■■■■tiamo 2.4Evaluation without windowEP criterionCriterion for the recognition of equivalence points. Equiva
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■557TitrinoInput range 0 - 200 Default value 5 [New]Opens the Measured value window # dialog window, in
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■558■■■■■■■■tiamo 2.4Fixed endpoint evaluationFixed endpoint evaluationon | off (Default value: off)If this check box
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■559Maximum evaluationMaximum evaluationon | off (Default value: off)If this option is enabled, then the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■560■■■■■■■■tiamo 2.4Input range 2 - 20 Default value 5 WindowA range (window) can be defined on the measured value a
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■561Gran evaluationNOTEThis evaluation method is possible only with Titrando and 855.Gran evaluationon |
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■562■■■■■■■■tiamo 2.4Additional calculated measured valuesAdditional calculated measured valueson | off (Default valu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■5635.6.3.2.5.9 DET Upol - Measured value windowDialog window: Method ▶ DET Upol ▶ Properties... ▶ Pote
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■42■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.ETR Result of the electrode test.Electrode quality:0 =
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■564■■■■■■■■tiamo 2.4descendingOnly endpoints with a negative slope of the titration curve will be rec-ognized.5.6.3.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■565greatestOnly the endpoint with the greatest ERC value, i.e. the steepest jump,will be recognized.las
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■566■■■■■■■■tiamo 2.4PrincipleWith this command titrations with reagent addition at constant volumeincrements are car
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■567Conductivity evaluation (MET Cond)The first step to evaluation is a rough localization of the equiva
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■568■■■■■■■■tiamo 2.4■ MET UpolAmperometric measurement with selectable polarization voltage (mea-sured quantity curr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■569■ Additional measured valuesDefinition of additional measured values of other measuring com-mands wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■570■■■■■■■■tiamo 2.4Designation Description.EP{x}.TIM Time in s until the endpoint × (1…9) is reached.EP{x}.VOL Volu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■571Designation Description.LP.CAx Calculated value × (1...3) for the last measuring pointon the measuri
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■572■■■■■■■■tiamo 2.4Designation Description.STY Type of stop with which the command was stopped: 1= normal; 0 = manu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■573If the option not defined is selected as Device name, any device typesor device groups which are abl
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■43Identifica-tionDescription Commands.FP{x}.MEA Measured value for the fixed end-poi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■574■■■■■■■■tiamo 2.4SensorMeasuring inputSelection of the measuring input the sensor is connected to.Titrando (witho
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■575StirrerStirrerSelection of the stirrer.Titrando, 855Selection 1 | 2 | 3 | 4 | offoffNo stirrer will
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■576■■■■■■■■tiamo 2.4Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is dete
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■577Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 0.00000 mLTitrinoInput range 0.00 - 999.9
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■578■■■■■■■■tiamo 2.4Selection maximumStart slopeNOTEOnly displayed for Titrando and 855.Start slopeWhen the start sl
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■579Titration rateTitration rateThe three predefined sets of parameters can be selected for the titratio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■580■■■■■■■■tiamo 2.4TitrinoInput range 0.5 - 999.0 mV/minDefault value 20.0 (slow), 50.0 (optimal), 80.0 (fast) mV/m
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■581Volume incrementSmall volume increments are used for the determination of blank values orfor very as
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■582■■■■■■■■tiamo 2.4TitrinoInput range -170.0 - 500.0 °CDefault value 25.0 °C5.6.3.3.2.5 MET pH - Stop conditionsTa
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■583Stop EPThe titration is stopped when the specified number of equivalence pointshas been found.Input
Table of contents■■■■■■■■■■■■■■■■■■■■■■IV■■■■■■■■tiamo 2.42.4.4 Operators/functions ... 56
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■44■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.HP{x}.TEM Temperature for the HNP x (1 - 9)in °CDET, ME
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■584■■■■■■■■tiamo 2.45.6.3.3.2.6 MET pH - Potentiometric evaluationTab: Method ▶ MET pH ▶ Properties... ▶ Potentiome
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■585EP recognitionFilter for the recognition of equivalence points:TitrinoSelection all | greatest | las
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■586■■■■■■■■tiamo 2.4Evaluation with volume window (mL)[New]Open the dialog window Volume window # in which the param
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■587[Delete]Delete the selected line.pK/HNP evaluationpK/HNP evaluationon | off (Default value: off)If t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■588■■■■■■■■tiamo 2.4Break point evaluationNOTEThis evaluation method is possible only with Titrando and 855.Break-po
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■589Window = Measured valueInput range -20.000 - 20.000 pHDefault value -20.000 pHWindow = VolumeInput r
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■590■■■■■■■■tiamo 2.4Initial volumeVolume which must be present in the measuring vessel before the com-mand is starte
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■591[Properties]Open the dialog window Calc. measured value # in which the parame-ters for the additiona
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■592■■■■■■■■tiamo 2.4Upper limit pHUpper limit for the measured value window.Input range -20.000 - 20.000 Default val
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■593Lower limitLower limit for the volume window.Titrando, 855Input range 0.00000 - 9999.99 mLDefault va
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■45Identifica-tionDescription Commands.LP.CHA Charge for the last measuringpoint of t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■594■■■■■■■■tiamo 2.45.6.3.3.2.11 MET pH - Fixed endpoint evaluation Dialog window: Method ▶ MET pH ▶ Properties...
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■595ParametersThe parameters for the command MET U are configured in the following7 tabs:■ General/Hardw
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■596■■■■■■■■tiamo 2.4.CONC Concentration of the solution used for the command.CYL Cylinder volume of the exchange or
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■597.GP.TEM Temperature for the Gran endpoint in °C.GP.TIM Time in s until the Gran endpoint is reached.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■598■■■■■■■■tiamo 2.4.MI.TEM Temperature with minimum measured value in °C.MI.TIM Time for the minimum measured value
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■599not definedIn this case, the device name must be assigned by the user at the startof the method.Devi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■600■■■■■■■■tiamo 2.4Entry 24 charactersSelection 'Solution name' | not definedDefault value not definednot
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■601offThe temperature will not be measured. The temperature entered man-ually under Temperature on the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■602■■■■■■■■tiamo 2.4Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is dete
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■603Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 0.00000 mLTitrinoInput range 0.00 - 999.9
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■46■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.LP.TEM Temperature for the last measur-ing point in the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■604■■■■■■■■tiamo 2.4Selection maximumStart slopeNOTEOnly displayed for Titrando and 855.Start slopeWhen the start sl
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■605Titration rateTitration rateThe three predefined sets of parameters can be selected for the titratio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■606■■■■■■■■tiamo 2.4TitrinoInput range 0.5 - 999.0 mV/minDefault value 20.0 (slow), 50.0 (optimal), 80.0 (fast) mV/m
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■607Volume incrementSmall volume increments are used for the determination of blank values orfor very as
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■608■■■■■■■■tiamo 2.4TitrinoInput range -170.0 - 500.0 °CDefault value 25.0 °C5.6.3.3.3.5 MET U - Stop conditionsTab
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■609Stop EPThe titration is stopped when the specified number of equivalence pointshas been found.Input
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■610■■■■■■■■tiamo 2.45.6.3.3.3.6 MET U - Potentiometric evaluationTab: Method ▶ MET U ▶ Properties... ▶ Potentiometr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■611EP recognitionFilter for the recognition of equivalence points:TitrinoSelection all | greatest | las
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■612■■■■■■■■tiamo 2.4Evaluation with volume window (mL)[New]Open the dialog window Volume window # in which the param
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■613[New]Open the dialog window Fixed endpoint evaluation # to enter a newfixed endpoint (see Chapter 5.
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■47Identifica-tionDescription Commands.MA.TEM Temperature for the maximummeasured val
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■614■■■■■■■■tiamo 2.4Input range 1.0 - 2000.0 mV/mLDefault value 25.0 mV/mLBreak point evaluationNOTEThis evaluation
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■615Lower limitValue for the lower limit of the window.Window = Measured valueInput range -2000.0 - 2000
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■616■■■■■■■■tiamo 2.4Input range 0.01 - 9999.99 mLDefault value 50.00 mLLower limitValue for the lower limit of the G
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■617Additional external measured valuesAdditional external measured valueson | off (Default value: off)I
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■618■■■■■■■■tiamo 2.4Titrando, 855Input range -2000.0 - 2000.0 mVDefault value 2000.0 mVTitrinoInput range -2000 - 20
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■619Lower limitLower limit for the volume window.Titrando, 855Input range 0.00000 - 9999.99 mLDefault va
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■620■■■■■■■■tiamo 2.45.6.3.3.3.11 MET U - Fixed endpoint evaluation Dialog window: Method ▶ MET U ▶ Properties... ▶
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■621ParametersThe parameters for the command MET Ipol are configured in the follow-ing 7 tabs:■ General/
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■622■■■■■■■■tiamo 2.4Designation Description.CYL Cylinder volume of the exchange or dosing unit usedfor the command.D
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■623Designation Description.GP.TIM Time in s until the Gran endpoint is reached.HP{x}.MEA Measured value
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■48■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.MR.MRS Standard deviation for mean dos-ing rate for the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■624■■■■■■■■tiamo 2.4Designation Description.MI.TEM Temperature with minimum measured value in °C.MI.TIM Time for the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■625Selection 'Device name' | not definedDefault value not definednot definedIn this case, the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■626■■■■■■■■tiamo 2.4command, a check is made of the working life, the validity of the titer andthe GLP test interval
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■627to a measurement. A check is also made while doing so to ensure that theelectrode is properly connec
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■628■■■■■■■■tiamo 2.4Switch on/off automaticallyon | off (Default value: on)If this option is enabled, the stirrer wi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■629Input range 0 - 999999 sDefault value 0 sMax. waiting timeIf signal drift has been switched off or h
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■630■■■■■■■■tiamo 2.4Start measured valueOnce the start measured value is reached, the dosing of the start volumeis s
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■631PausePauseWaiting time, e.g. for the electrode to settle down after the start or areaction time afte
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■632■■■■■■■■tiamo 2.4Measured value acceptanceNOTEWill be displayed only if the option User is selected in the select
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■633time that is suitable for the drift will be calculated automatically accordingto the following equat
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■49Identifica-tionDescription Commands.PK{x}.TRN Transmission of the peak x (1 - 9)in
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■634■■■■■■■■tiamo 2.4Selection maximumDefault value maximumTitrinoInput range 0.01 - 150.00 mL/minSelection maximumDe
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■635TitrinoInput range 0.000 - 9999.99 mLDefault value 100.00 mLSelection offStop measured valueStops wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■636■■■■■■■■tiamo 2.4Filling rateSpeed with which the dosing cylinder is to be refilled after the titration.The maxim
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■637Evaluation with volume window (mL)This option is visible only for Titrando and 855.. With this optio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■638■■■■■■■■tiamo 2.4Evaluation with measured value window (Ipol)[New]Open the dialog window in which the parameters
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■639Fixed endpoint evaluationFixed endpoint evaluationon | off (Default value: off)If this check box is
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■640■■■■■■■■tiamo 2.4Maximum evaluationMaximum evaluationon | off (Default value: off)If this option is enabled, then
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■641Input range 2 - 20 Default value 5 WindowA range (window) can be defined on the measured value axis,
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■642■■■■■■■■tiamo 2.4Gran evaluationNOTEThis evaluation method is possible only with Titrando and 855.Gran evaluation
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■643Additional calculated measured valuesAdditional calculated measured valueson | off (Default value: o
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■50■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.SAN Current absolute swing angle ofthe robotic arm in °
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■644■■■■■■■■tiamo 2.45.6.3.3.4.9 MET Ipol - Measured value windowDialog window: Method ▶ MET Ipol ▶ Properties... ▶
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■645firstOnly the first endpoint to be found will be recognized.greatestOnly the endpoint with the great
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■646■■■■■■■■tiamo 2.4EP recognitionFilter for the recognition of equivalence points:Titrando, 855Selection first | gr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■6475.6.3.3.5 MET Upol5.6.3.3.5.1 MET Upol - OverviewDialog window: Method ▶ MET Upol ▶ Properties...
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■648■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated in the method run by thecommand M
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■649Designation Description.EVT End volume (total dosed volume at the end of thecommand) in mL.FIN Comma
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■650■■■■■■■■tiamo 2.4Designation Description.LP.MEA Measured value for the last measuring point of themeasuring point
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■651Designation Description.SVT Total start volume (volume that was added in depend-ence on all three st
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■652■■■■■■■■tiamo 2.4TitrandoSelection 1 | 2 | 3 | 4Default value 1855Selection 1 | 2 | 3Default value 1TitrinoSelect
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■653SensorSelection of a sensor of type Metal electrode from the sensors config-ured in the sensor table
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■51Identifica-tionDescription Commands.SVS Start volume slope (volume thatwas added a
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■654■■■■■■■■tiamo 2.4StirrerStirrerSelection of the stirrer.Titrando, 855Selection 1 | 2 | 3 | 4 | offoffNo stirrer w
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■655Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■656■■■■■■■■tiamo 2.4Titrando, 855Input range 0.00000 - 9999.99 mLDefault value 0.00000 mLTitrinoInput range 0.00 - 9
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■657Selection maximumStart slopeNOTEOnly displayed for Titrando and 855.Start slopeWhen the start slope
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■658■■■■■■■■tiamo 2.4Titration rateTitration rateThe three predefined sets of parameters can be selected for the titr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■659TitrinoInput range 0.05 - 99.90 µA/minDefault value 20.00 (slow), 50.00 (optimal), 80.00 (fast) µA/m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■660■■■■■■■■tiamo 2.4Volume incrementSmall volume increments are used for the determination of blank values orfor ver
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■661TitrinoInput range -170.0 - 500.0 °CDefault value 25.0 °C5.6.3.3.5.5 MET Upol - Stop conditionsTab:
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■662■■■■■■■■tiamo 2.4Volume after EPWhen the number of equivalence points defined under Stop EP has beenfound, this v
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■663Potentiometric evaluationSelection Evaluation without window | Evaluation withmeasured value window
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■52■■■■■■■■tiamo 2.4Identifica-tionDescription Commands.TITER Titer value of the solution usedfor the commandDE
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■664■■■■■■■■tiamo 2.4allAll equivalence points will be recognized.greatestOnly the equivalence point with the greates
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■665[Properties]Open the dialog window Volume window # in which the parametersfor the selected window ca
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■666■■■■■■■■tiamo 2.4Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, then
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■667related to the total measured value alteration, even small changes in themeasured value can be evalu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■668■■■■■■■■tiamo 2.4Window = Measured valueInput range -200.0 - 200.0 µADefault value 200.0 µAWindow = VolumeInput r
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■6695.6.3.3.5.8 MET Upol - Additional measured valuesTab: Method ▶ MET Upol ▶ Properties... ▶ Additiona
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■670■■■■■■■■tiamo 2.4[Properties]Open the dialog window External measured value # in which theparameters for the exte
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■671greatestOnly the endpoint with the greatest ERC value, i.e. the steepest jump,will be recognized.las
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■672■■■■■■■■tiamo 2.4EP recognitionFilter for the recognition of equivalence points:Titrando, 855Selection first | gr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■6735.6.3.3.6 MET Cond5.6.3.3.6.1 MET Cond - OverviewDialog window: Method ▶ MET Cond ▶ Properties...
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■53Method variables can be selected directly in the formula editor under Var-iables ▶
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■674■■■■■■■■tiamo 2.4Command variablesThe following command variables are generated by the MET Cond com-mand in the m
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■675Identification Description.EP{x}.TIM Time in s until the endpoint × (1 - 9) is reached.EP{x}.VOL Vol
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■676■■■■■■■■tiamo 2.4Identification Description.LP.TIM Time in s until the last measuring point in the mea-suring poi
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■677Identification Description.SVT Total start volume (volume that was added accord-ing to all three sta
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■678■■■■■■■■tiamo 2.4Device typeDisplay or selection of the instrument type. If an instrument is selected inthe Devic
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■679SensorSelection of a sensor of type Conductivity sensor from the list of sensorsavailable in the sen
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■680■■■■■■■■tiamo 2.45.6.3.3.6.3 MET Cond - Start conditionsTab: Method ▶ MET Cond ▶ Properties... ▶ Start condition
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■681Start volumeStart volumeVolume to be dosed with the indicated dosing rate before the start of thetit
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■682■■■■■■■■tiamo 2.4slowFor titrations in which the finest details are also to be visible. This couldhowever also le
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■683time that is suitable for the drift will be calculated automatically accordingto the following formu
■■■■■■■■■■■■■■■■■■■■■■Table of contentstiamo 2.4■■■■■■■■V3.8.2 Live display - Tracks ... 180
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■54■■■■■■■■tiamo 2.4You can select the determination variables directly in the formula editorunder Variables/De
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■684■■■■■■■■tiamo 2.4Input range –20.0 - 150.0 °CDefault value 20.0 °CReference temperatureThe electrical conductivit
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■685The conductivity measured at a particular temperature is thus auto-matically converted to the co
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■686■■■■■■■■tiamo 2.4Stop measured valueStop when the entered measured value for a measuring point has beenexceeded o
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■687Evaluation with volume window (mL)An area (window) can be defined on the volume axis with this optio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■688■■■■■■■■tiamo 2.4The following additional methods for evaluation of titration curves can beactivated and defined
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■689Maximum evaluationMaximum evaluationon | off (Default value: off)If this check box is activated, the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■690■■■■■■■■tiamo 2.4WindowA range (window) can be defined on the measured value axis, on the vol-ume axis or on the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■691A maximum of 6 additional measured values can be defined on this tab.These values can then be saved
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■692■■■■■■■■tiamo 2.45.6.3.3.6.9 MET Cond - Volume windowDialog window: Method ▶ MET Cond ▶ Properties... ▶ Conducto
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■693Measured valueInput range -2000.0 - 2000.0 mS/cmTimeInput range 0.0 - 999999.9 sVolumeInput range 0.
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■55Variable name Description DatatypeSTC Start counter NumberUSN Short name of the lo
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■694■■■■■■■■tiamo 2.4NOTEThis command can be used for rapid routine determinations when theendpoint does not change t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■695■ SET UpolAmperometric measurement with selectable polarization voltage (mea-sured quantity current
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■696■■■■■■■■tiamo 2.4without conditioning with conditioningParametersThe parameters for the SET pH command are set on
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■697Identification Description.CBY Command status; 1 = Conditioning activated, 0 =Conditioning deactivat
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■698■■■■■■■■tiamo 2.4Identification Description.FP{x}.TEM Temperature for the fixed endpoint × (1 - 9) in °C.FP{x}.TI
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■699Identification Description.MTE Temperature measurement with sensor; 1 = on, 0 =off).NMP Number of me
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■700■■■■■■■■tiamo 2.4Device typeDisplay or selection of the device type. If a device is selected under Devicename, th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■701not definedNo tests will be carried out.SensorMeasuring inputSelection of the measuring input to whi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■702■■■■■■■■tiamo 2.4StirrerStirrerSelection of the stirrer.Titrando, 855Selection 1 | 2 | 3 | 4 | offoffNo stirrer w
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■703Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■56■■■■■■■■tiamo 2.4Syntax'GV.Variable name.Variable name'Examples: 'GV.TestDate', 'GV
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■704■■■■■■■■tiamo 2.4Titrando, 719, 720, 736, 751, 758, 785, 794, 798, 799Input range 0 - 999999 sDefault value 0 sSt
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7055.6.3.4.3.4 SET pH - Control parametersTab: Method ▶ SET pH ▶ Properties... ▶ Control parametersCom
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■706■■■■■■■■tiamo 2.4ControlNOTEWill be displayed only if the Users option is selected in the selection listTitration
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■707TitrinoInput range 0.01 - 150.00 mL/minDefault value 1.00 (slow), 10.00 (optimal), 150.00(fast) mL/m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■708■■■■■■■■tiamo 2.4Input range 1 - 999 µL/minDefault value 20 µL/minDelay timeIf the endpoint has been reached, the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■709TitrinoInput range -20.00 - 20.00 Selection offDefault value offFor additional parameters for Endpoi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■710■■■■■■■■tiamo 2.4Titrando, 855Input range -20.0 - 150.0 °CDefault value 25.0 °CTitrinoInput range -170.0 - 500.0
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■711Stop timeStops when the preset time (including start conditions) has elapsed sincethe start of the t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■712■■■■■■■■tiamo 2.4Titrando, 855Input range 1 - 999 µL/minDefault value 20 µL/minDrift correctionIf this parameter
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■713Selection offDefault value offStabilizing timeWaiting period until the start of the titration during
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■57Operators FunctionsComparison:■ Equal to (=)■ Greater than (>)■ Greater than or
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■714■■■■■■■■tiamo 2.4Show measured value during conditioningon | off (Default value: off)If this option is enabled, t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■715Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, then the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■716■■■■■■■■tiamo 2.4Additional calculated measured valuesAdditional calculated measured valueson | off (Default valu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7175.6.3.4.3.10 SET pH - Fixed endpoint evaluationDialog window: Method ▶ SET pH ▶ Properties... ▶ Add
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■718■■■■■■■■tiamo 2.4ParametersThe parameters for the SET U command are set on the following eighttabs:■ General/Hard
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■719Identification Description.CBY Command status; 1 = Conditioning activated, 0 =Conditioning deactivat
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■720■■■■■■■■tiamo 2.4Identification Description.FP{x}.TEM Temperature for the fixed endpoint × (1 - 9) in °C.FP{x}.TI
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■721Identification Description.MTE Temperature measurement with sensor; 1 = on, 0 =off).NMP Number of me
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■722■■■■■■■■tiamo 2.4Device typeDisplay or selection of the device type. If a device is selected under Devicename, th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■723not definedNo tests will be carried out.SensorMeasuring inputSelection of the measuring input to whi
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■58■■■■■■■■tiamo 2.4Operand1 Operand2 Result Example RemarkText Text Text "Metrohm" + "AG"
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■724■■■■■■■■tiamo 2.4offThe temperature will not be measured. The temperature entered man-ually under Temperature on
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■725Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■726■■■■■■■■tiamo 2.4Titrando, 719, 720, 736, 751, 758, 785, 794, 798, 799Input range 0 - 999999 sDefault value 0 sSt
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7275.6.3.4.4.4 SET U - Control parametersTab: Method ▶ SET U ▶ Properties... ▶ Control parametersComma
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■728■■■■■■■■tiamo 2.4ControlNOTEWill be displayed only if the Users option is selected in the selection listTitration
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■729TitrinoInput range 0.01 - 150.00 mL/minDefault value 1.00 (slow), 10.00 (optimal), 150.00(fast) mL/m
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■730■■■■■■■■tiamo 2.4Input range 1 - 999 µL/minDefault value 20 µL/minDelay timeIf the endpoint has been reached, the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■731TitrinoInput range -20.00 - 20.00 Selection offDefault value offFor additional parameters for Endpoi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■732■■■■■■■■tiamo 2.4Titrando, 855Input range -20.0 - 150.0 °CDefault value 25.0 °CTitrinoInput range -170.0 - 500.0
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■733Stop timeStops when the preset time (including start conditions) has elapsed sincethe start of the t
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■59Operand1 Operand2 Result Example RemarkOperand of different type: The operand whic
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■734■■■■■■■■tiamo 2.4Titrando, 855Input range 1 - 999 µL/minDefault value 20 µL/minDrift correctionIf this parameter
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■735Selection offDefault value offStabilizing timeWaiting period until the start of the titration during
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■736■■■■■■■■tiamo 2.4Show measured value during conditioningon | off (Default value: off)If this option is enabled, t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■737Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, then the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■738■■■■■■■■tiamo 2.4Additional calculated measured valuesAdditional calculated measured valueson | off (Default valu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7395.6.3.4.4.10 SET U - Fixed endpoint evaluationDialog window: Method ▶ SET U ▶ Properties... ▶ Addit
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■740■■■■■■■■tiamo 2.4ParametersThe parameters for the SET Ipol command are set on the following eighttabs:■ General/H
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■741Identification Description.COK Command status; 1 = Condition requirement ful-filled, 0 = Condition r
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■742■■■■■■■■tiamo 2.4Identification Description.IME Initial measured value (measured value before startconditions are
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■743Identification Description.SME Start measured value (measured value after process-ing the start cond
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■60■■■■■■■■tiamo 2.4Operand1 Operand2 Result Example RemarkTime Number Number Time(1999;10;7) * 2.0 = 72'8
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■744■■■■■■■■tiamo 2.4If the option not defined is selected as Device name, any device typesor device groups which are
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■745SensorMeasuring inputSelection of the measuring input to which the sensor is connected.Titrando (wit
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■746■■■■■■■■tiamo 2.4continuousA temperature sensor must be connected. The temperature will thenbe measured continuou
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7475.6.3.4.5.3 SET Ipol - Start conditionsTab: Method ▶ SET Ipol ▶ Properties... ▶ Start conditionsCom
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■748■■■■■■■■tiamo 2.4Input range 0 - 999999 sDefault value 1 sPause 1Pause 1Waiting time, e.g. until the electrode ha
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■749Pause 2Pause 2Waiting time, e.g. for the electrode to settle down after the start or areaction time
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■750■■■■■■■■tiamo 2.4slowFor titrations in which the finest details are also to be visible. This couldhowever also le
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■751Max. rateRate at which dosing is carried out outside of the control range. Themaximum dosing rate de
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■752■■■■■■■■tiamo 2.4timeThe endpoint must be exceeded for a certain time: the Delay time. Thesame Delay time with di
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■753Endpoint 2NOTEIs active only for EP1 at ≠ off.on | off (Default value: off)Enable/disable endpoint 2
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■612.4.4.2.5 PotentiationDialog window: Formula editor ▶ Operators/FunctionsSyntaxOp
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■754■■■■■■■■tiamo 2.4autoThe titration direction is determined automatically from the start mea-sured value and the s
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■755The conditions for stopping the titration are defined on this tab. If severalstop conditions are set
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■756■■■■■■■■tiamo 2.45.6.3.4.5.7 SET Ipol - ConditioningTab: Method ▶ SET Ipol ▶ Properties... ▶ ConditioningCommand
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■757Input range 0.0 - 99.9 µL/minDefault value 0.0 µL/minStop volumeStops when the given volume has been
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■758■■■■■■■■tiamo 2.4Manual start after sample addition with [Continue]on | off (Default value: off)If this option is
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■759Moves the selected line up (changes the sequence).Moves the selected line down (changes the sequence
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■760■■■■■■■■tiamo 2.4Input range 1.0 - 2000.0 mV/mLDefault value 25.0 mV/mL5.6.3.4.5.9 SET Ipol - Additional measure
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■761[New]Opens the External measured value # dialog window, in which theparameters for the external meas
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■762■■■■■■■■tiamo 2.4Titrando: 808, 809, 835, 836, 841, 842, 852, 857, 888, 901, 902, 904,905, 906, 907Titrino: 702,
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■763Command variablesThe following command variables are generated by the SET Upol com-mand in the metho
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■62■■■■■■■■tiamo 2.4Operand1 Operand2 Result1 1 10 1 01 0 00 0 0ExamplesOper-and1Oper-and2Result Example Remark
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■764■■■■■■■■tiamo 2.4Identification Description.EVT End volume (total dosed volume at the end of thecommand) in mL.FI
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■765Identification Description.MA.VOL Volume at maximum measured value in mL.MI.MEA Minimum measured val
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■766■■■■■■■■tiamo 2.4Selection 'Device name' | not definedDefault value not definednot definedIn this case,
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■767command, a check is made of the working life, the validity of the titer andthe GLP test interval for
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■768■■■■■■■■tiamo 2.4to a measurement. A check is also made while doing so to ensure that theelectrode is properly co
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■769Switch on/off automaticallyon | off (Default value: on)If this option is enabled, the stirrer will b
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■770■■■■■■■■tiamo 2.4Input range 0 - 999999 sDefault value 0 sMax. waiting timeIf signal drift has been switched off
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■771Selection maximumDefault value maximumPause 2Pause 2Waiting time, e.g. for the electrode to settle d
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■772■■■■■■■■tiamo 2.4fastFor less critical, fast titrations.UserEditing the individual titration parameters which aff
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■773Titrando, 855Input range 0.01 - 166.00 mL/minDefault value 1.00 (slow), 10.00 (optimal), 166.00(fast
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■632.4.4.3.2 ORDialog window: Formula editor ▶ Operators/FunctionsSyntaxOperand1 OR
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■774■■■■■■■■tiamo 2.4offThe titration will not be stopped. In older instructions the Delay timewas usually defined as
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■775EP2 atMeasured value for the second endpoint.Input range –200.0 - 200.0 µASelection offDefault value
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■776■■■■■■■■tiamo 2.4temperature will be measured continuously. This value is used for temper-ature correction in pH
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■777Stop timeStops when the preset time (including start conditions) has elapsed sincethe start of the t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■778■■■■■■■■tiamo 2.4Titrando, 855Input range 1 - 999 µL/minDefault value 20 µL/minDrift correctionIf this parameter
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■779Selection offDefault value offStabilizing timeWaiting period until the start of the titration during
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■780■■■■■■■■tiamo 2.4Show measured value during conditioningon | off (Default value: off)If this option is enabled, t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■781Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, then the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■782■■■■■■■■tiamo 2.4Additional calculated measured valuesAdditional calculated measured valueson | off (Default valu
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7835.6.3.4.6.10 SET Upol - Fixed endpoint evaluationDialog window: Method ▶ SET Upol ▶ Properties... ▶
Table of contents■■■■■■■■■■■■■■■■■■■■■■VI■■■■■■■■tiamo 2.44.6.4 Information - Sample ... 3534.
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■64■■■■■■■■tiamo 2.4Operand1 Operand2 Result Example RemarkNumber Time Number 2.0 OR Time(1999;10;7) --> 10
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■784■■■■■■■■tiamo 2.4■ Continuous dosingThe dosing continues to be carried out at the Max. rate until theControl rang
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■7855.6.3.5.2 KFT Ipol5.6.3.5.2.1 KFT Ipol - OverviewDialog window: Method ▶ KFT Ipol ▶ Properties...
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■786■■■■■■■■tiamo 2.4■ Additional measured valuesDefinition of additional measured values of other measuring com-mand
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■787Identification Description.ETE End temperature (temperature after the commandhas been processed) in
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■788■■■■■■■■tiamo 2.4Identification Description.MA.VOL Volume at maximum measured value in mL.MI.MEA Minimum measured
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■789Selection 'Device name' | not definedDefault value not definednot definedIn this case, the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■790■■■■■■■■tiamo 2.4command, a check is made of the working life, the validity of the titer andthe GLP test interval
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■791to a measurement. A check is also made while doing so to ensure that theelectrode is properly connec
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■792■■■■■■■■tiamo 2.4Switch on/off automaticallyon | off (Default value: on)If this option is activated, the stirrer
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■793Input range 0 - 999999 sDefault value 0 sMax. waiting timeIf signal drift has been switched off or h
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■65Oper-and1Oper-and2Result Example RemarkText Number Number "Metrohm" = 1.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■794■■■■■■■■tiamo 2.4Pause 2Pause 2Waiting time, e.g. for the electrode to settle down after the start or areaction t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■795UserEditing the individual titration parameters which affect the titrationrate.ControlNOTEWill be di
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■796■■■■■■■■tiamo 2.4TitrandoInput range 0.01 - 166.00 mL/minDefault value 1.00 (slow), maximum (optimal), maximum(fa
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■797TimeThe endpoint must be exceeded during a certain period of time: thedelay time. The same delay tim
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■798■■■■■■■■tiamo 2.4Stop timeThe titration is canceled when the absolute stop time defined here haselapsed since the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■799Titrando, 855Input range -20.0 - 150.0 °CDefault value 25.0 °CTitrinoInput range -170.0 - 500.0 °CDe
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■800■■■■■■■■tiamo 2.4Stop timeStop when the entered time has elapsed after the start of the titration(including start
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■801TitrandoInput range 1 - 999 µg/minDefault value 20 µg/minDrift correctionIf this parameter is set to
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■802■■■■■■■■tiamo 2.4Selection offDefault value offStabilizing timeWaiting period until the start of the titration du
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■803Show measured value during conditioningon | off (Default value: off)If this option is enabled, then
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■66■■■■■■■■tiamo 2.4Oper-and1Oper-and2Result Example RemarkTime Time Number Time(1998;04;06) >Time(1964;02;0
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■804■■■■■■■■tiamo 2.4Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, then
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■805Additional calculated measured valuesAdditional calculated measured valueson | off (Default value: o
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■806■■■■■■■■tiamo 2.45.6.3.5.2.10 KFT Ipol - Fixed endpoint evaluationDialog window: Method ▶ KFT Ipol ▶ Properties.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■807ParametersThe parameters for the KFT Upol command are set on the followingeight tabs:■ General/Hardw
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■808■■■■■■■■tiamo 2.4Identification Description.CYL Cylinder volume of the exchange or dosing unit usedfor the comman
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■809Identification Description.LP.CAx Calculated value × (1 - 3) for the last measuring pointin the meas
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■810■■■■■■■■tiamo 2.4Identification Description.STY Type of stop with which the command was stopped:1 = normal; 0 = m
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■811Dosing deviceDosing deviceSelection of the number of the dosing device (dosing or exchange unit)with
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■812■■■■■■■■tiamo 2.4890Selection 1Default value 1SensorSelection of a sensor of type Metal electrode from the sensor
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■813offThe temperature will not be measured. The temperature entered man-ually under Temperature on the
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■67Oper-and1Oper-and2Result Example RemarkText Text Number "Metrohm" >=
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■814■■■■■■■■tiamo 2.4Initial measured valueNOTEIs displayed only for Titrando.The initial measured value is determine
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■815Start volumeStart volumeVolume to be dosed with the indicated dosing rate before the start of thetit
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■816■■■■■■■■tiamo 2.4End pointEP atMeasured value for the endpoint.Input range –200.0 - 200.0 µADefault value 25.0 µA
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■817has been reached. The larger the control range, the slower the titration.Outside the control range,
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■818■■■■■■■■tiamo 2.4Stop criterionStop criterionThe titration is canceled after the last dosing once the endpoint ha
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■819TitrandoInput range 1 - 999 µL/minDefault value 10 µL/minDelay timeIf the endpoint has been reached,
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■820■■■■■■■■tiamo 2.4autoThe titration direction is determined automatically from the initial mea-sured value and the
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■821Stop volumeStop when the entered volume has been added after the start of the titra-tion (including
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■822■■■■■■■■tiamo 2.45.6.3.5.3.7 KFT Upol - ConditioningTab: Method ▶ KFT Upol ▶ Properties... ▶ ConditioningCommand
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■823Input range 0.0 - 99.9 µL/minDefault value 0.0 µL/minStop volumeStop of the determination when the s
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■68■■■■■■■■tiamo 2.4Oper-and1Oper-and2Result Example RemarkNumber Number Number 5 < 4 --> 04 < 5 -->
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■824■■■■■■■■tiamo 2.4Manual start after sample addition with [Continue]on | off (Default value: off)If this option is
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■825Moves the selected line up (changes the sequence).Moves the selected line down (changes the sequence
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■826■■■■■■■■tiamo 2.4Input range 0.5 - 10.0 µA/mLDefault value 5.0 µA/mL5.6.3.5.3.9 KFT Upol - Additional measured v
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■827[New]Opens the External measured value # dialog window, in which theparameters for the external meas
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■828■■■■■■■■tiamo 2.4NOTEThe coulometric water determination is mainly used to determine smallamounts of water.Instru
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■829Command variablesThe following command variables are generated in the method run by thecommand KFC a
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■830■■■■■■■■tiamo 2.4Designation Description.FP{x}.QTY Measured value (water) for the fixed endpoint × (1…9)in µg.FP{
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■831Designation Description.SME Start measured value (measured value after processingthe start condition
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■832■■■■■■■■tiamo 2.4Selection Sensor name | Metal electrodeDefault value Metal electrodeI(pol)Polarization current a
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■833Selection without diaphragm | with diaphragmDefault value without diaphragmGenerator currentPolariza
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■69ExamplesOper-and1Oper-and2Result Example RemarkOperands of the same type:Number Nu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■834■■■■■■■■tiamo 2.4851, 852Input range -15 - 15 Default value 8 Switch on/off automaticallyon | off (Default value:
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■835Titration rateTitration rateThe three predefined sets of parameters can be selected for the titratio
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■836■■■■■■■■tiamo 2.4756, 831Input range 1.0 - 2000 mVDefault value 120.0 (slow), 70.0 (optimal), 30.0 (fast) mV851,
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■837Selection maximumMin. rateThis parameter defines the minimum rate with which iodine is generatedinsi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■838■■■■■■■■tiamo 2.4Delay timeIf the endpoint has been reached, the delay time defined here is awaitedafter the last
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■8395.6.3.6.6 KFC - Stop conditionsTab: Method ▶ KFC ▶ Properties... ▶ Stop conditionsCommand nameName
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■840■■■■■■■■tiamo 2.4Selection automatic | manual | offDefault value automaticautomaticThe drift lastly determined du
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■841Manual start after sample addition with [Continue]on | off (Default value: off)If this option is act
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■842■■■■■■■■tiamo 2.45.6.3.6.8 KFC - Additional evaluationsTab: Method ▶ KFC ▶ Properties... ▶ Additional evaluation
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■843Additional calculated measured valuesAdditional calculated measured valueson | off (Default value: o
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■70■■■■■■■■tiamo 2.4ExamplesOper-and1Oper-and2Result Example RemarkOperands of the same type:Number Number Numb
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■844■■■■■■■■tiamo 2.45.6.3.6.10 KFC - Fixed endpoint evaluationDialog window: Method ▶ KFC ▶ Properties... ▶ Additio
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■845ParametersThe parameters for the command BRC are configured in the following 8tabs:■ General/Hardwar
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■846■■■■■■■■tiamo 2.4Designation Description.EME End measured value (measured value after processingof the command) i
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■847Designation Description.LP.IGE Current pulsed current for the last measuring point inthe measuring p
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■848■■■■■■■■tiamo 2.4not definedIn this case, the device name must be assigned by the user at the startof the method.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■849Temperature measurementType of temperature measurement.Selection continuous | automatic | offDefault
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■850■■■■■■■■tiamo 2.4Stirring rateSetting the stirring rate. The algebraic sign of the stirring rate changes thedirec
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■851time has elapsed, even if the signal drift has already been reached. Thedrift continues to be checke
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■852■■■■■■■■tiamo 2.4slowFor titrations in which the finest details are also to be visible. This couldhowever also le
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■853Min. rateThis parameter defines the minimum rate with which bromine is gener-ated inside the Control
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■71ParametersNumber ExponentThe parameter can be indicated either directly as a num
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■854■■■■■■■■tiamo 2.45.6.3.7.5 BRC - Titration parametersTab: Method ▶ BRC ▶ Properties... ▶ Titration parametersCom
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■8555.6.3.7.7 BRC - ConditioningTab: Method ▶ BRC ▶ Properties... ▶ ConditioningCommand nameName of the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■856■■■■■■■■tiamo 2.4Stop timeDetermination stops when the specified time has elapsed since the start ofthe condition
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■857NOTEConditioning must already be completed (= Condok) at the time theSEND command is received, other
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■858■■■■■■■■tiamo 2.4[Properties]Open the dialog window Fixed endpoint evaluation # to edit the fixedendpoint selecte
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■859which can also be displayed in curves under the designation Extern 1…3and used in formulas as variab
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■860■■■■■■■■tiamo 2.45.6.3.8 STAT5.6.3.8.1 STAT - OverviewMenu item: Method ▶ Insert ▶ New command...Command for ST
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■861TroubleshootingProblemRemedyThe control point is not main-tained well. The measured value isat times
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■862■■■■■■■■tiamo 2.4■ STAT pHSTAT titration with pH electrodes (measured quantity pH).■ STAT USTAT titration with me
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■8635.6.3.8.4 STAT - Track callDialog window: Method ▶ STAT/STAT pH/STAT U ▶ Properties... ▶ Monitor-in
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■72■■■■■■■■tiamo 2.4expected type, it will automatically be converted to this. If this is not possi-ble, the re
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■864■■■■■■■■tiamo 2.4However, in order to ensure uninterrupted dosing, the following pointsmust be taken into account
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■865Titrando: 835, 836, 842, 857, 902, 906, 907Titrino: 718, 736, 751, 799Robotic Titrosampler: 855Appea
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■866■■■■■■■■tiamo 2.4Identification Description.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =READY; invalid (varia
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■867Identification Description.LP.EXx External value × (1 - 3) for the last measuring point inthe measur
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■868■■■■■■■■tiamo 2.4Identification Description.RE{x}.RWL Lower limit of the evaluation window × (1 - 9) in s.RE{x}.R
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■869Device typeDisplay or selection of the device type. If a device is selected under Devicename, then t
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■870■■■■■■■■tiamo 2.4not definedNo tests will be carried out.Tandem dosingon | off (Default value: off)If this option
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■871Titrando, 855Input range 0.01 - 166.00 mL/minSelection maximumDefault value maximumSensorMeasuring i
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■872■■■■■■■■tiamo 2.4offThe temperature will not be measured. The temperature entered man-ually under Temperature on
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■873Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■73Abs('CV.AverageTemp') = Value of the common variables CV.Avera-geTemp wi
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■874■■■■■■■■tiamo 2.4Titrando, 855Input range 0 - 999,999 sDefault value 0 sStart volumeStart volumeVolume to be adde
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■8755.6.3.8.6.4 STAT pH - Control parametersTab: Method ▶ STAT pH ▶ Properties... ▶ Control parametersC
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■876■■■■■■■■tiamo 2.4Titrando, 855Input range 0.001 - 20.000 Default value 1.000 Selection offTitrinoInput range 0.01
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■877NOTEThe parameters Max. rate and Dynamics pH should be optimizedtogether in such a way that the titr
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■878■■■■■■■■tiamo 2.4Titrando, 855Input range -20.0 - 150.0 °CDefault value 25.0 °CTitrinoInput range -170.0 - 500.0
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■879Titrando, 855Input range 0.01 - 166.00 mL/minSelection offDefault value offTitrinoInput range 0.01 -
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■880■■■■■■■■tiamo 2.4sinceSpecifies when the stop time begins to count (will not be displayed if theStop time is disa
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■881Selection maximumDefault value maximum5.6.3.8.6.7 STAT pH - MonitoringTab: Method ▶ STAT pH ▶ Prope
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■882■■■■■■■■tiamo 2.4Titrando, 855Input range –20.000 - 20.000 Default value 20.000 TitrinoInput range –20.00 - 20.00
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■883Monitoring Dosing rateMonitoring Dosing rateon | off (Default value: off)If this option is enabled,
■■■■■■■■■■■■■■■■■■■■■■Table of contentstiamo 2.4■■■■■■■■VII5.4.2 Edit method groups ... 4295
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■74■■■■■■■■tiamo 2.4Int('CV.AverageTemp') = Integer of the value of the common variableCV.AverageTemp
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■884■■■■■■■■tiamo 2.4Upper hysteresisUpper hysteresis of the dosing rate. If the dosing rate once again fallsbelow th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■885Monitoring TemperatureMonitoring Temperatureon | off (Default value: off)If this option is enabled,
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■886■■■■■■■■tiamo 2.4Titrando, 855Input range 0.0 - 150.0 °CDefault value 0.2 °CActionSelection of the event to be tr
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■8875.6.3.8.6.8 STAT pH - EvaluationsTab: Method ▶ STAT pH ▶ Properties... ▶ EvaluationsCommand nameNam
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■888■■■■■■■■tiamo 2.4[New]Opens the Fixed endpoint evaluation # dialog window for entering anew fixed endpoint.[Prope
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■8895.6.3.8.6.9 STAT pH - Additional measured valuesTab: Method ▶ STAT pH ▶ Properties... ▶ Additional
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■890■■■■■■■■tiamo 2.4[Properties]Opens the External measured value # dialog window, in which theparameters for the ex
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■891AppearanceThe command has the following appearance:ParametersThe parameters for the STAT U command a
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■892■■■■■■■■tiamo 2.4Identification Description.CONC Concentration of the solution used for the command.CYL Cylinder
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■893Identification Description.LP.MEA Measured value for the last measuring point in theunit of the meas
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■75Sign(26.115) = 1Sign('CV.AverageTemp') = Sign of the value of the common
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■894■■■■■■■■tiamo 2.4Identification Description.RE{x}.RWH Upper limit of the evaluation window × (1 - 9) in s.SLO Ele
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■895Device typeDisplay or selection of the instrument type. If an instrument is selected inthe Device na
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■896■■■■■■■■tiamo 2.4not definedNo tests will be carried out.Tandem dosingon | off (Default value: off)If this option
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■897Titrando, 855Input range 0.01 - 166.00 mL/minSelection maximumDefault value maximumSensorMeasuring i
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■898■■■■■■■■tiamo 2.4offThe temperature will not be measured. The temperature entered man-ually under Temperature on
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■899Initial measured valueNOTEOnly displayed for Titrando and 855.The initial measured value is determin
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■900■■■■■■■■tiamo 2.4Titrando, 855Input range 0 - 999,999 sDefault value 0 sStart volumeStart volumeVolume to be adde
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9015.6.3.8.7.4 STAT U - Control parametersTab: Method ▶ STAT U ▶ Properties... ▶ Control parametersCom
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■902■■■■■■■■tiamo 2.4Titrando, 855Input range 0.1 - 2,000.0 mVDefault value 60.0 mVSelection offTitrinoInput range 1.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■903NOTEThe parameters Max. rate and Dynamics should be optimizedtogether in such a way that the titrati
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■76■■■■■■■■tiamo 2.4Titer determination: 0.991, 1.021, 0.995, 1.003, 1.007, 0.993, 0.998,1.015, 1.003, 0.985Mea
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■904■■■■■■■■tiamo 2.4Titrando, 855Input range -20.0 - 150.0 °CDefault value 25.0 °CTitrinoInput range -170.0 - 500.0
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■905Titrando, 855Input range 0.01 - 166.00 mL/minSelection offDefault value offTitrinoInput range 0.01 -
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■906■■■■■■■■tiamo 2.4sinceSpecifies when the stop time begins to count (will not be displayed if theStop time is disa
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9075.6.3.8.7.7 STAT U - MonitoringTab: Method ▶ STAT U ▶ Properties... ▶ MonitoringCommand nameName of
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■908■■■■■■■■tiamo 2.4TitrinoInput range –2,000 - 2,000 Default value 2,000 Upper hysteresisUpper hysteresis of the me
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■909Monitoring Dosing rateMonitoring Dosing rateon | off (Default value: off)If this option is enabled,
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■910■■■■■■■■tiamo 2.4Upper hysteresisUpper hysteresis of the dosing rate. If the dosing rate once again fallsbelow th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■911Lower limitLower limit of the temperature. If the temperature falls below this limit,the event Lower
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■912■■■■■■■■tiamo 2.4Selection Cancel determination | Cancel command(Titrando, 855) | Wait for [Continue] | Wait forl
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■913The following methods for the evaluation of titration curves can be acti-vated and defined on this t
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■77expected type, it will automatically be converted to this. If this is not possi-bl
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■914■■■■■■■■tiamo 2.4Minimum evaluationMinimum evaluationon | off (Default value: off)If this option is enabled, then
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■915Additional calculated measured valuesAdditional calculated measured valueson | off (Default value: o
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■916■■■■■■■■tiamo 2.45.6.3.8.7.10 STAT U - Fixed endpoint evaluationDialog window: Method ▶ STAT U ▶ Properties... ▶
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■917■ General/HardwareParameters for devices, dosing devices, sensors and stirrers.■ Start conditionsEnt
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■918■■■■■■■■tiamo 2.4Designa-tionDescriptionEP{x}.TIM Time for the endpoint x (1...9) in sEP{x}.VOL Volume for the en
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■919Designa-tionDescriptionMI.TIM Time at minimum measured value in sMI.VOL Volume at minimum measured v
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■920■■■■■■■■tiamo 2.4If the option not defined is selected as Device name, any device typesor device groups which are
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■921not definedIf the sensor is not defined, then it will be checked at the start of thedetermination wh
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■922■■■■■■■■tiamo 2.4Dosing rateRate (volume/time unit) at which the start volume is to be added. Themaximum dosing r
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■923Damping untilRange from the start of the measurement in which the curve is addition-ally damped. Thi
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■78■■■■■■■■tiamo 2.4hour 0…23minute 0…59second 0…59A parameter can be indicated either directly as a number or
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■924■■■■■■■■tiamo 2.4Selection offDefault value offStop slopeStop when the criterion defined for the first derivative
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9255.6.3.9.6 TET - Thermometric evaluationTab: Method ▶ TET ▶ Properties... ▶ Thermometric evaluationC
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■926■■■■■■■■tiamo 2.4The following additional methods for evaluation of titration curves can beactivated and defined
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■927Maximum evaluationon | off (Default value: off)If this option is activated, then the associated volu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■928■■■■■■■■tiamo 2.4Additional external measured valuesAdditional external measured valueson | off (Default value: o
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9295.6.3.9.10 TET - Fixed endpoint evaluationDialog window: Method ▶ TET ▶ Properties... ▶ Additional
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■930■■■■■■■■tiamo 2.4In non-aqueous solutions the half neutralization potential (HNP) isfrequently used instead of th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9315.6.3.10.3 Break-point evaluationParameters: Method ▶ DET/MET/MEAS ▶ Properties... ▶ Additional eva
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■932■■■■■■■■tiamo 2.45.6.3.10.4 Gran evaluationParameters: Method ▶ DET/MET ▶ Properties... ▶ Additional evaluations
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9335.6.3.11 Additional measured values5.6.3.11.1 Calculated measured valueDialog window: Method ▶ DET
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■792.4.4.7 Type Conversion functions2.4.4.7.1 NumberToTextDialogfenster: Formula ed
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■934■■■■■■■■tiamo 2.4Selection empty | ppm | % | g/L | mg/L | mg/mL | mg/100g | mol/L | mmol/L | mL | g | mg | µg | °
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■935Entry 250 charactersDefault value 'empty'5.6.4 Measuring commands5.6.4.1 Measuring comma
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■936■■■■■■■■tiamo 2.4■ STDADD manStandard addition with manual addition of the standard addition solu-tion.■ STDADD d
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■937Total volume 20 mLFactor cStandard solution/cSam-ple20This results in a sample concentration in the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■938■■■■■■■■tiamo 2.4the aid of a CALC command according to the following formula (ρ = den-sity in g/mL):CAUTIONRecal
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■939CommandsThe following standard addition commands can be selected:■ STDADD manStandard addition with
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■940■■■■■■■■tiamo 2.4■ EvaluationsDefining further methods for evaluating measurement curves.■ Additional measured va
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■941Designation Description.LP.CAx Calculated value x (1…3) for the last measuring pointon the measuring
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■942■■■■■■■■tiamo 2.4DeviceDevice nameSelection of a device from those available in the device table. The onlydevices
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■943Selection Sensor name | pH electrodeDefault value pH electrodeTemperature measurementType of tempera
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■80■■■■■■■■tiamo 2.42.4.4.7.3 TextToNumberDialogfenster: Formula editor ▶ Operators/FunctionsSyntaxy = TextToN
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■944■■■■■■■■tiamo 2.4Switch off automaticallyon | off (Default value: on)If this check box is activated, the stirrer
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■945Measurement with drift controlIf the option Measurement with drift control has been selected, thenth
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■946■■■■■■■■tiamo 2.4Titrando, 855, 867Input range 0.1 - 999999.0 s (Increment: 0.1)Default value 2.0 sTitrinoInput r
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■947Stop measured value pHStops when the preset measured value has been reached since the start ofthe me
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■948■■■■■■■■tiamo 2.4Moves the selected line up (changes the sequence).Moves the selected line down (changes the sequ
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■949Break point evaluationBreak point evaluationon | off (Default value: off)If this option is activated
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■950■■■■■■■■tiamo 2.4Window = TimeInput range 0 - 999999 sDefault value 0 sUpper limitValue for the upper limit of th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■951[Properties]Open the dialog window Calc. measured value # in which the parame-ters for the additiona
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■952■■■■■■■■tiamo 2.4Measured valueInput range -20.000 - 20.000 pHTimeInput range 0.0 - 999999.9 s5.6.4.4 MEAS U5.6.
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■953Command variablesThe following command variables are generated in the method run by thecommand MEAS
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■81Characters SignificanceM Monthd DayH Hour 0…23h Hour AM/PMm Minutes Seconda AM/PM
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■954■■■■■■■■tiamo 2.4Designation Description.LP.EXx External value x (1…3) for the last measuring point onthe measuri
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■955Selection 'Device name' | not definedDefault value not definednot definedIn this case, the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■956■■■■■■■■tiamo 2.4Titrando, 855, 867Selection continuous | automatic | offDefault value automaticcontinuousA tempe
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■9575.6.4.4.3 MEAS U - Measuring parametersTab: Method ▶ MEAS U ▶ Properties... ▶ Measuring parametersC
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■958■■■■■■■■tiamo 2.4Titrando, 855, 867Input range 0.1 - 999.0 mV/minDefault value 10.0 mV/minTitrinoInput range 0.5
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■959Stop measured valueStops when the preset measured value has been reached since the start ofthe measu
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■960■■■■■■■■tiamo 2.4offNo stop.TemperatureTemperatureMeasuring temperature which can be entered manually. If a tempe
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■961[New]Open the dialog window Fixed endpoint evaluation # to enter a newfixed endpoint (see Chapter 5.
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■962■■■■■■■■tiamo 2.4Break point evaluationBreak point evaluationon | off (Default value: off)If this option is activ
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■963Window = TimeInput range 0 - 999999 sDefault value 0 sUpper limitValue for the upper limit of the wi
2.4 Formula editor■■■■■■■■■■■■■■■■■■■■■■82■■■■■■■■tiamo 2.4NOTEBoth for the automatic and explicit conversion of a Time to the typeNumber, the number
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■964■■■■■■■■tiamo 2.4[Properties]Open the dialog window Calc. measured value # in which the parame-ters for the addit
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■965Measured value (Titrando, 867, 855)Input range -2000.0 - 2000.0 mVMeasured value (Titrino)Input rang
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■966■■■■■■■■tiamo 2.4■ Additional measured valuesDefining further measured values which can be saved as additional co
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■967Designation Description.LP.MEA Measured value for the last measuring point of themeasuring point lis
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■968■■■■■■■■tiamo 2.4Device typeDisplay or selection of the device type. If a device is selected under Devicename, th
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■969TitrinoInput range -127 - 125.0 µA (Increment: 1)Default value 5 µAElectrode checkon | off (Default
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■970■■■■■■■■tiamo 2.4Titrando, 855, 867Input range -15 - 15 Default value 8 Switch off automaticallyon | off (Default
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■971NOTEA constant measured value is often only reached after a certain time, asmixing and possibly the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■972■■■■■■■■tiamo 2.4Titrando, 855, 867Input range 0 - 999999 sDefault value 52 sTitrinoInput range 0 - 9999 sDefault
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■973Measuring intervalTime interval for entering a measuring point in the measuring point list.Titrando,
■■■■■■■■■■■■■■■■■■■■■■2 General program functionstiamo 2.4■■■■■■■■83Characters Significance Exampley two-digit year number 03yyyy four-digit year numb
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■974■■■■■■■■tiamo 2.4The following additional methods for evaluation of measurement curvescan be activated and define
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■975Maximum evaluationMaximum evaluationon | off (Default value: off)If this option is enabled, then the
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■976■■■■■■■■tiamo 2.4WindowA range (window) can be defined on the measured value axis or on thetime axis. The break p
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■977Additional calculated measured valuesAdditional calculated measured valueson | off (Default value: o
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■978■■■■■■■■tiamo 2.45.6.4.5.6 MEAS Ipol - Fixed endpoint evaluation # Dialog window: Method ▶ MEAS Ipol ▶ Propertie
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■979ParametersThe parameters for the command MEAS Upol are configured on the fol-lowing 4 tabs:■ General
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■980■■■■■■■■tiamo 2.4Designation Description.FP{x}.TEM Temperature for the fixed endpoint × (1…9) in °C.FP{x}.TIM Tim
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■981The general parameters for the device, the sensor and the stirrer aredefined on this tab.DeviceDevic
5.6 Commands■■■■■■■■■■■■■■■■■■■■■■982■■■■■■■■tiamo 2.4SensorSelection of a sensor of type Metal electrode from the sensors config-ured in the sensor t
■■■■■■■■■■■■■■■■■■■■■■5 Methodtiamo 2.4■■■■■■■■983StirrerStirrerSelection of the stirrer.Titrando, 855, 867Selection 1 | 2 | 3 | 4 | offoffNo stirrer
Comments to this Manuals