Metrohm 888 Titrando User Manual download pdf (Page 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

888 Titrando

￭￭￭￭￭￭￭￭

3.4.2 Connecting a USB hub

If you wish to connect more than two devices to the USB connector of the

888 Titrando, you can also use an additional commercially available USB

hub (distributor). If you operate the 888 Titrando with the help of the

Touch Control, then you should use a USB hub with its own power sup-

ply.

Connect the USB hub as follows:

Switch off the Touch Control and/or exit the PC software.

With the aid of the 6.2151.020 cable, connect the USB connector of

the 888 Titrando (type A) with the USB connector of the hub (type B,

see manual for the hub).

Switch on the Touch Control.

The USB hub is recognized automatically.

3.4.3 Connecting a printer

Printers that are connected to the 888 Titrando with Touch Control must

meet the following requirements:

￭ Printer languages: HP-PCL (PCL 3 to 5, PCL 3GUI), Canon BJL Com-

mands or Epson ESC P/2

￭ Printer resolution: 300 dots/inch or 360 dots/inch (Epson)

￭ Paper size: A4 or Letter, single-sheet feed.

Connect the printer as follows:

Switch off the Touch Control.

With the aid of the 6.2151.020 cable, connect the USB connector of

the 888 Titrando (type A) with the USB connector of the printer (type

B, see manual for the printer).

Switch on the printer first, then the Touch Control.

Configure the printer in the device manager of the Touch Control

(see Touch Control manual).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 56 57

No comments

Metrohm 888 Titrando User Manual Page 27